FIXED BIKEE 2 Mobile Phone Holder for Bike User Manual
- June 5, 2024
- FIXED
Table of Contents
FIXED BIKEE 2 Mobile Phone Holder for Bike
Thank you for purchasing the removable silicone FIXED Bikee 2 mobile phone holder for bike. Its installation is very easy, please follow the steps below:
Read this manual before use and keep it for future reference.
Mounting
-
Insert the phone into the holder and pull the silicone parts over the edges of the phone. (If you own an iPhone with FaceID, these parts will not cover the sensor or prevent you from swiping.)
-
To install the holder on the handlebars of your bike or motorcycle, first unscrew the thread, slide it onto the handlebars and then screw the nut back in so tightly that the holder does not swivel.
-
To remove the silicone head of the phone holder with the phone, simply press the holder down and turn it 90°, the head will unlock and the phone can be removed together with the silicone part of the holder.
-
To place the phone with the silicone head back into the holder, place the lock in its position and the magnet will draw the silicone head by itself. Then press down and turn 90° again to lock the lock. In the locked position, the silicone head / phone can be rotated up to 360°.
PACKAGE CONTENT
- 1x FIXED Bikee 2 mobile phone holder for bike
PROBLEM SOLVING
In case of problems with the product, you can contact our support at www.fixed.zone/podpora
FIXED.zone a.s.
Kubatova 6
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>