AIGOSTAR 6500K LED Flood Light User Manual
- June 9, 2024
- aigostar
Table of Contents
AIGOSTAR 6500K LED Flood Light
**LED FLOOD LIGHT
**
Please take time to read this leaflet carefully and retain it for future reference.
Diagram
SPECIFICATION
The light
source of this luminaire is not replaceable; when the light source reaches its
end of life, the whole luminaire shall be replaced.
SAFETY INFORMATION
- Installation must be carried out accordance with national building and wiring regulations. If you have any doubts about installing this product, please consult a qualified electrician.
- The LED module light source in this luminaire shall only be replaced by the manutacturer, service agent or a similar qualified person.
- Dangerous voltage may be accessible with the cover removed.
- This product is suitable for connection to a 220-240V 50/60Hz supply.
- This isa cdass I product that requires an earth connection and IP65 ratedd for outdoor use.
SENSOR SPECIFICATION:
Turning the
SENS dial anticlockwise will decrease the detection range (2m-10m).
Turning the TIME dial anticlockwise will decrease the hold time (10 seconds-
7minutes).
Turning the LUX dial anticlockwise will restrict activation to lower light
conditions(3-2000lux).
INSTALLATION
This product should be disposed of responsible at the end of its life. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>