Cyber Acoustics AC-5812 USB Controller and Headset User Guide
- June 5, 2024
- Cyber Acoustics
Table of Contents
Cyber Acoustics AC-5812 USB Controller and
Headset
In the Package
Note: The USB controller is packed in the bag. Pull out the inner bag to locate the USB controller.
**Using the AC-5812 USB Headset
**
Getting Started
- Connect the AC-5812 Headset 3.5mm audio jack into the USB Controller as shown.
- Plug the USB cable on the USB Controller into the USB Type A connector of your computer.
- The USB Connection is Plug and Play. The AC-5812 should be automatically recongnized and installed on your computer.
Note: You can also use the 3.5mm Audio jack to plug in to smartphones, tablets and other devices.
Light Indicator
The indicator light wil l be lit Green for normal operation and will be lit Red when the mic is muted.
Controls
Technical Specifications
Specifications
Sensitivity:| • -62dBV / microbar
• -42dBV / Pascal +/- 4dB
Frequency response| • Headset: 20 – 20,000Hz
• Microphone: 100 – 16,000Hz
Impedance| • Headset: 32 ohms
• Microphone: 2.2k ohms
Recommended system requirements
Supported operating systems| Windows 10, Windows 8, Windows 7, Mac OS X
10.4.11, or higher.
Operating temperature| Product working at ambient temperature for 0~35°C
Frequently Asked Questions
| Frequently Asked Questions | Possible Solutions |
|---|
Windows 7/8:
Headset does not set up automatically (USB connection)
| • Open the control panel Window.
• In the upper-right corner, change “View by” to Small icons.
• Double click on “Sound”, then click on the “Playback” tab.
• Select “AC-5812 USB Headset” then click Set Default.
• Verify green circle with a check mark next to “AC-5812 USB Headset”.
• Double click on “Sound”, then click on the “Recording” tab.
• Select “AC-5812 USB Headset” then click Set Default.
• Verify green circle with a check mark next to “AC-5812 USB Headset”.
• Click Configure.
• (Optional) To adjust the headset volume, click Properties.
• When finished, click “Apply” then “OK”.
Windows 10:
Headset does not set up automatically (USB connection)
| • In the search box on the taskbar, type control panel, then select it from the results.
• Select Hardware and Sound from the Control Panel, and then select Sound.
• On the Playback tab, right-click “AC-5812 USB Headset”, select Set as Default Device, and then select OK.
• Verify green circle with a check mark next to “AC-5812 USB Headset”.
• On the “Recording” tab, right-click “AC-5812 USB Headset”, select Set as Default Device, and then select OK.
• Verify green circle with a check mark next to “AC-5812 USB Headset”.
• (Optional) To adjust the headset volume, click Properties.
• When finished, click “Apply” then “OK”.
Mac:
Headset does not set up automatically (USB connection)
| • Open the Finder Application, then select Applications.
• Open System Preferences, then click Sound.
• Select the Input tab, then select “AC-5812 USB Headset”. Make sure that the mute button isn’t selected.
• Select the Output tab, then select “AC-5812 USB Headset”. Make sure that the mute button isn’t selected
• When finished, close System Preferences.
Frequently Asked Questions| Possible Solutions|
---|---|---
Headset does not have sound / Microphone is not working| • Check the
computer’s and headset’s volume level.
• Check proper seating of cable connection.
• Verify the application settings you are using.
Some applications have separate volume level control.
• Check that the computer recognizes the Headset – showing it is connected and selected within your computer OS settings. (See above for Windows and Mac settings instructions)
• Verify the input / output levels within the sound/audio settings of your computer’s settings.
• Check the mute setting. Press to un-mute if it is muted.
• Restart your computer and re-verify the above steps. Restarting often helps a computer connect to the Headset.
Headset audio cannot be unmuted on Chromebooks| • The process of unmuting audio on Chromebooks is different from other laptops. Press Spk On/Off key of the USB controller to mute the audio. To unmute audio, press the Volume + or Volume – key of the USB controller.
Customer Support
If you have a question about your USB Controller and Headset, our Customer
Support Team wants to assist you.
Contact us at:
www.cyberacoustics.com/support/contact
Safety and Precautions
- Read and follow all instructions – All operating and use instructions should be followed.
- Protect the Headset from being pinched, particularly at the connectors. Unplug during lightning storms or when unused for long periods of time.
- Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not make alterations to the USB controller and the headset.
- Do not place near naked flame sources, such as lighted candles
- Do not expose to excessive heat (e.g. from storage in direct sunlight, fire or the like)
FCC RULES
Unique Identifier: (AC-5812)
Responsible Party – Cyber Acoustics LLC
3109 NE 109th Ave., Vancouver, WA 98682
cyberacoustics.com
Compliance Information Statement:
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and 2. This device must
accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna
- increase the separation between the equipment and receiving device
- connect the equipment into an outlet on different circuit from the receiving device
- Consult the dealer or an experienced radio/TV technician for help
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>