BOSS BR-800 Digital Multi Track Recorder User Manual

May 15, 2024
Boss

BOSS BR-800 Digital Multi Track Recorder User Manual

Welcome

Congratulations on your purchase of the BOSS BR-800. This TurboStart contains step-by-step instructions that will quickly introduce you to the BR-800’s major features.

Listening to the Demo Song

Use the following procedure to load and play back the demo song in the BR-800.
Note: To hear the BR-800, connect headphones to the headphone output or connect the LINE OUT L and R jacks to your mixer.

  • Press
  • Turn the dial to select “SONG.”
  • Press
  • Turn the dial to choose “SELECT.”
  • Press
  • Turn the dial to select “DemoSong.”
  • Press
  • Press
  • Raise the MASTER fader and the TRACK MIXER faders to adjust the levels of the
  • Press STOP when you’re

Recording a Song

Here’s how to record a guitar track while using the built-in effects and playing along with the BR-800’s Rhythm Guide.
First, start by creating a new blank song to record into as follows.

  • Press
  • Turn the dial to select “SONG.”
  • Press
  • Turn the dial to select “NEW.”
  • Press ENTER three

Setting Up the Guitar

  • With a standard guitar or instrument cable, connect your guitar to the GUITAR/BASS (Hi-Z)
  • Press
  • Turn the dial to choose “INPUT ”
  • Press
  • Turn the dial counterclockwise to select “GUITAR/BASS.”
  • Press the 6 button to choose “MODE.”
  • Turn the dial to select “MONO ”
  • Press EXIT twice to return to the main
  • While playing the guitar, adjust the REC LEVEL knob until the INPUT 1 meter reaches the – 6 mark on the left side of the
  • Press the REC button below TRACK MIXER Fader 1 so that REC lights red— this puts the BR-80 in Record Standby mode for Track

Inserting a COSM Guitar Effect on the Guitar Input

  • Press the COSM EFFECTS button so its green indicator is
  • Turn the dial to choose “P40 Blues ”
  • Press EXIT to return to the main

Adding the Rhythm Guide

  • Press the RHYTHM button so its green indicator is
  • Press 5 to choose “TYPE.”
  • Turn the dial to select “PATTERN.”
  • Press 6 once to select “PATRN.”
  • Turn the dial to select Rhythm Pattern P020 ROCK4-V1.
  • Press 6 twice to choose “TEMPO.”
  • Turn the dial to select the desired
  • Press EXIT to return to the main
  • Press PLAY to start the drum
  • Raise the RHYTHM fader to the desired listening
  • Press STOP, and then press

Recording a Performance

  • Press the REC
  • Raise the TRACK MIXER fader for the track on which you want to
  • Press the REC button—it flashes
  • Press PLAY to start
  • When you’re finished recording, press
  • Press the ZERO button to instantly rewind back to the beginning of the
  • Press PLAY to hear the

Adding Reverb to the Recorded Track

  • Press the TRACK
  • Turn the dial to select “REVERB.”
  • Press
  • Use the 3, 4, 5, and 6 buttons to select the desired
  • Turn the dial to adjust the send value for the track—this sets the amount of reverb to be added to the track’s

Tip: To add Chorus or Delay, use the same procedure, but select “CHO/DELAY” in Step 2.

About Saving Your Work on the BR-800

There’s nothing you need to do to save your work—the BR-800 stores it for you automatically!

Mixing Down Tracks with MASTER FX

You’ll need to mix down all of your tracks to a stereo pair of tracks before you can export your song as a .WAV file to your computer. This is something you need to do if you’d like to create an audio CD on your computer using CD- burning software. As you mix down, you can take advantage of the BR-800’s MASTER FX to smooth out the differences in volume that occur over the course of the song.

  • Press
  • Turn the dial to “MASTERING,” and then press
  • Turn the dial clockwise to turn on
  • Press EXIT twice to return to the main Beneath the word “MASTERING” on the display, you can see the track(s) to which you’ll be mastering. By default, “TR78-VMST” is displayed for the stereo virtual mastering track belonging to Tracks 7 and 8.
  • Press the MASTER FX button.
  • Turn the dial to select a desired MASTER FX
  • Press EXIT to return to the main
  • Press the ZERO button to return to the beginning of your
  • Press RECORD and then press
  • When the song has finished playing, press STOP.A stereo mix of your song has now been recorded onto TR78-VMST.

Read More About This Manual & Download PDF:

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Boss User Manuals

Related Manuals