ROYCHE BTS-MKB-A-109 Project R Multi-Pairing Mechanical Keyboard User Manual

User Manual
PROJECT[R] BTS-MKB-A-109
Multi-Pairing Mechanical Keyboard

Before Lsing the produe, plaase make sure to esdithe stuction marnual

How to use

When using the product for the firs ime, charge tfor about 2 hours.

Wired connection

1. Insert the TYPE-C interface of the charging cable into the keyboard, and connect the USB interface to your computer.

2. Rotate to USB Wired Mode, Num Lock indicator will flash once and then go out, the connection is successfully completed.

• In TYPE-C wired mode, the “ON/OFF” switch has no function.

2. 2.4G connection

1. Turn the power switch to ON.
   

2. Take out the receiver and insert the receiver into the USB port of the computer.

3.  Tum the mode rotary knob to 2.4G mode, the Num Lock indicator flashes twice and then goes off, the connection is successfully completed.

 Bluetooth connection

1. Turn the power switch to ON. Turn the mode rotary knob to BT mode, the Num Lock indicator flashes three times and then goes out.

• Take the connection to BT1 as an example as follows: 2.  Long press the Fn + & key for about 3-5 seconds, the corresponding indicator light will flash quickly, and then enter the Bluetooth pairing mode.

  3.  Turn on the Bluetooth of your computer or other device, search and setect “PJR BT3.0” or “PJR BTS.0″and start Bluethhth pairing until the connection is completed.
     Windows 7 and below system versions do not support Bluetooth 5.0;
     The device number corresponding to Bluetooths 3.0 is PJR BT3.0, and the device number
     corresponding to Bluetooth 5.0 is PJR BT5.0

Mode switching method of the keyboard

1.  Mode channet: The keyboard has 5 channels, B11, BT2, BT3, 2.4G, wired, and 5 devices can be connected at the same time.
2. Mode rotary knob: Turn the mode rotary knob between Wired/2.4G/BT. Press Fn + Q, Wor E to switch between different Bluetooth channels of BT1, BT2 and BT3.

iOS/Mac/Win layout switching

Short press to switch system layout

*The default setting is Windows layout.

Charging guide:

1.  Low voltage reminder: flashes red to remind low voltage.
   

2. Plug the charging cable’ TYPE-C interface into the keyboard, USB interface into your computer to start charging, red light is always on during charging process.

3.  Indicator turns in green after the charging is completed.

• During the plug-in charging process, every mode is not controlled by the “ON/OFF” switch, and the power supply is directly supplied by the charging cable.

Shaft replacement method:

1.  Use a keycap puller to unplug the key caps.
   

2. Pull out the switch with a switch puller.

3. Check the installation position of the switch to be replaced and align the hole positions.
   

4.  Place the new switch on the slot.

5. Gently press the new switch to install it into the slot.
   

6. Install the keycap, you can use it normally.

SPEC

Keyboard, Type-C Cable, Manual, 2.4G Receiver, Adjustable height Magnetic Feet, 4xSpare Switch, Key cap puller, Switch puller Type-C Wired, 2.4G Wireless, Bluetooth 3Channels(v5.0)
Layout| 98Key
Compatible OS Transmission distance| compatible with Windows 8 and Mac 10.5 above
Trade name/Manufacturer| 10m
Country of origin/Country of manufacture| ROYCHECo.,Ltd
AS center| CHINA 02-711-0077
Address| 14 years of age or older (This product is not a children’s product)
Age of Use| F11 Parkland B/D 601 Eunjuro Gangnam Gu, Seoul Korea

Function overview of the keyboard

Components

Precautions

1.  Do not drop the instrument from a high place.
2.  Do not disassemble or modify the device arbitrary.
3.  Do not use or store the device in heated or high-temperature environments.
4.  Do not submerge in water; store in a dry place away from moisture and dust.
5. Do not connect metallic objects to the terminals.
6. If any abnormal behavior occurs during product use, discontinue use and seek service.
7. Store out of reach of children and supervise their use.
8. Turn off the power when not in use and store properly.
9.  Do not dispose of products with depleted battery life improperty (no incineration).

• Only charge with a charger that matches the rated voltage. Using a fast charger may cause malfunctions.
•  The above precautions can lead to causes such as ignition, rupture, electric shock, injury, etc., so please be sure to observe them.
• Specifications and appearance are subject to change without notice for product improvement purposes.
• This device is primarily intended for home use as a Class B electromagnetic wave compatible device.

Product Warranty

In accordance with the Consumer Damage Compensation Regulations, we assure the product as provided below.
When a service is needed, the Royche Customer Center will provide the service.(Warranty: 1 year from date of purchase)
Product name PROJECT R Multi-Pairing Mechanical Keyboard
Product No. BTS-MKB-A-109 Date of purchase / Where to buy

Drive Installation

For the custom mode, please scan the QR code to download the official drive.

www.projectroyche.co.kr
Reminder: The drive is only supported in wired and 2.4G mode.
Waming:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• ncrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>