hytronik HBIR28 2CH Reinforced Low-bay Wide User Manual

hytronik HBIR28 2CH Reinforced Low-bay Wide

Product Description

HBIR28/2CH is a Bluetooth PIR standalone motion sensor, On/Off control with two independent relay channel outputs. It has two relays built-in: one is voltage-free contact, which is NO (normally open contact) and NC (normally closed contact) 2-in-1, the other is normally closed relay output. It is ideal for typical indoor applications such as office, classroom, healthcare and other commercial areas. With Bluetooth wireless mesh networking, it makes communication between luminaires much easier without time-consuming hardwiring, which eventually saves costs for projects (especially for retrofit upgrade projects!). Meanwhile, simple device setup and commissioning can be done via app.

App Features

Technical Specifications

Sensor Data

Sensor Model| PIR detection
HBIR28/2CH| Installation Height : 6m Detection Range(Ø) :9m
HBIR28/2CH/R| Installation Height : 6m

Detection Range(Ø) :10m

HBIR28/2CH/W| Installation Height : 6m

Detection Range(Ø) :18m

HBIR28/2CH/H

| Installation height：15m (forklift)

12m (person) Detection range (Ø)：24m

HBIR28/2CH/RH

| Installation height：20m (forklift)

12m (person) Detection range (Ø)：40m

Detection angle| 360O
Input & Output Characteristics

Operating voltage| 220~240VAC 50/60Hz
Stand-by power| <1W

Load ratings

| Channel 1: 400VA

Channel 2: 24VDC@2A,250VAC@2A

Warming-up| 20s

Safety & EMC

EMC standard (EMC)| EN55015, EN61000, EN61547
Safety standard (LVD)| EN60669-1, EN60669-2-1 AS/NZS60669-1/-2-1
RED| EN300328, EN301489-1/-17
Certifcation| CB, CE , EMC, RED, RCM

Environment

For more details of defection range, please refer to detection pattern secfion

Mechanical Structure & Dimensions

1. Ceiling (drill hole Ø 66~68mm)
2. Carefully prise off the cable clamps.
3. Make connections to the pluggable terminal blocks.
4. Insert plug connectors and secure using the provided cable clamps, then clip terminal covers to the base.
5. Fit detection blind (if required) and desired lens.
6. Clip fascia to body.
7. Bend back springs and insert into ceiling

Wire Preparation

Pluggable screw terminal. It is recommended to make connections to the terminal before fitting to the sensor.

Detection Pattern & Optional Accessories

Wiring Diagram

Original status (stand-by)

By connecting L and COM, the VFC {voltagetree contact) channel can also be turned into a common Switch L output to achieve separate
control ot the two Switch L channels.

Dimming Interface Operation Notes

Switch-Dim
The provided Swifch-Dim interface allows for a simple dimming method using commercially available non-latching (momentary) wall switches. Detailed Push switch configurations can be sef on Koolmesh app

Push switch

| Short press (<1 second)

• Short press has to be longer than 0.1s, or it will be invalid.

| –   Turn on/off            – Recall a scene

–   Turn on only           – Quit manual mode

–   Turn off only           – Do nothing

Double push

| –   Turn on only           – Quit manual mode

–   Turn off only           – Do nothing

–   Recall a scene

Long press (≥1 second)

|

– Do nothing

Simulate sensor| /| – Upgrade a normal on/off motion sensor to a Bluetooth controlled motion sensor

Additional Information/ Documents

1. To learn more about detailed product features/tuncvtions, please reter to www.hytronik.com/download >knowledge >lntroduction of App Scenes and Product Functions
2. Regarding precautions tor Bluetooth product installation and operation, please kindly reter to www.hytronik.com/download >knowledge >Bluetooth Products – Precautions tor Product Installation and Operation
3. Regarding precauftions for PlR Sensors installation and operafion, please kindly reter to www.hytronik.com/download >knowledge >PR Sensors – Precautions for Product Installation and Operation
4. Data sheet is subject fo change without notice. Please always reter to the most recent release on www.hytronik.com/products/bluetooth technology >Bluetooth Sensors
5. Regarding Hytronik standard guarantee policy, please reter to www.hytronik.com/download >knowledge >Hytronik Standard Guarantee Policy

References

• iot.koolmesh.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>