OPTONICA 6394 3 or 4 Channel 12-60V Constant Voltage Power Repeater User Manual
- June 4, 2024
- OPTONICA
Table of Contents
OPTONICA 6394 3 or 4 Channel 12-60V Constant Voltage Power Repeater
Features
- 12-60V constant voltage power repeater.
- 3/4 channel, 5A max. per channel.
- To receive PWM signal control.
- Power repeater in series or in parallel to expand output unlimitedly.
- Apply to single color, dual color, RGB or RGBW constant voltage LED strip or module.
Technical Parameters
Input and Output
Input voltage| 12-60VDC
Input current
|
20A max.
Input signal| PWM(3/4CH, 5-24V or 36-60V)
Output voltage| 3/4 x (12-60)VDC
Output current| 3/4CH,5A max./CH
Output power| 3/4 x (60-300)W max.
Output type| Constant voltage
Warranty and Protection
Warranty| 3 years
Protection| Reverse Polarity
Safety and EMC
EMC standard (EMC)| EN301 489,EN 62479
Safety standard(LVD)| EN60950
Certification| CE,EMC,LVD
Environment
Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +85OC
IP rating| IP20
Mechanical Structures and Installations
Wiring Diagram
Parallel connection
Series connection
NOTE:
The PWM input can be 5-24V or 36-60V, please select correct V+ wire terminal.
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|---|---|---|
| No light | 1. No power. |
2. Wrong connection or insecure.
| 1. Check the power.
2. Check the connection.
Wrong color| 1. Wrong connection of R/G/B/W wires.| 1. Reconnect R/G/B/W
wires.
Uneven intensity between front and rear,with voltage drop| 1. Output cable is
too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
| 1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
Safety & Warnings
- The product shall be installed and serviced by a qualified person.
- This product is non-waterproof. Please avoid direct sun,rain and high humid ambient.
- Good heat dissipation will prolong the working life of the controller, Please ensure good ventilation.
- Please check if the output voltage of any power supplies used comply with the working voltage of the product.
- Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
- If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
IMPORTER:
Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor;
Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>