OPTONICA 6387 Ultrathin Touch Wheel RF Remote Controller User Manual

Ultrathin Touch Wheel RF Remote Controller
SKU: 6387/6381

1 and 4 zone RGB+CCT/Touch color wheel/Wireless remote 30m distance/CR2032 battery 

Features

• Apply to RGB+CCT LED controller.
• Ultra sensitive color adjustment touch wheel.
• Each remote can match one or more receivers.
• C R 2032 attery powered.
• Operate with LED indicator light.

Technical Parameters

Input and Output

Environment

Safety and EMC

EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
---|---
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED

Warranty

Weight

Mechanical Structures and Installations

Note: Before the first use, please remove the protective film on the battery.
To fix the remote, two options are offered for selection:
Option 1: fix the remote’ back holder on the wall with two screws.
Option 2: adhere the remote’ back holder to the wall with a paster.
Note: If the LED indicator is not on when press key, it is due to dead battery or bad contact caused by multiple plugging, please replace the battery, or raise the battery shrapnel with a screwdriver.

Operation

• When light is on, touch the color wheel, the indicator will display red.
• To extend battery life, no touch or press key operation after a few seconds, the touch wheel will enter sleep state, you need press any key to make touch wheel quit sleep state.

Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match: Short press the match key, immediately press on/off key (single zone remote) or zone key (multiple zones remote) on the remote.
The LED indicator fast flash a few times means the match is successful.
Delete: Press and hold the match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.
Use Power Restart
Match: Switch off the power, then switch on the power, repeat again. An immediately short press on/off key (single zone remote) or zone key (multiple zones remote) 3 times on the remote. The light blinks 3 times means the match is successful.
Delete: Switch off the power, then switch on the power, repeat again. An immediately short press on/off key (single zone remote) or zone key (multiple zones remote) 5 times on the remote. The light blinks 5 times means all matched remotes were deleted.

Key function

• 6387 1 zone RGB+CCT remote

On/Off: Short press turn on/off light.
Mode: Switch dynamic mode, short press run the next mode, long press 2s run mode cycle.
Speed/Saturation: For dynamic mode, adjust mode speed, short press 10 levels, and long press 2s get the default speed. For static RGB color, adjust saturation, namely change current static color to mixed white slowly, short press 11 levels,
long press 1-6s for continuous 256 levels adjustment.
Brightness: Adjust brightness, short press 11 levels, long press 2s get max or min brightness. at the same time, the multi-color wheel becomes the brightness wheel.
CCT: Adjust color temperature, WW CW. short press 11 levels, long press adjust + brightness at the same time, the multi-color wheel becomes color temperature wheel. Adjust color temperature by WW/CW channel. 

RGB: Adjust static RGB color, short press get 24 kinds of static color. at the same time, the multi-color wheel becomes an RGB color wheel.  

R/G/B: Short press get red green or blue color directly, long press 1-6s adjust R/G/B brightness continuously to achieve millions of colors. Scene: Short press recall the scene, long press 2s save the current color into scene.

• 6381 4 zone RGB+CCT remote

Can also be used as a four-zone universal remote, each zone can match single color, dual color(WW/CW), RGB, RGBW or RGB+WW/CW controller.
Zone 1/2/3/4 + : Single color
Zone 1/2/3/4 + : Dual color(WW/CW)
Zone 1/2/3/4 + : RGB
Zone 1/2/3/4 + : RGBW
Zone 1/2/3/4 + : RGB+WW/CW
For example, long press 1 and ****key for 2s will set zone 1 as RGB light type.
When the remote light type set ok, the red indicator will light on longer. On/Off: Turn on/off all four zone light.
1,2,3,4 Zone: Short press turn on zone light, at the same time, select a current zone.
Long press 2s turn off zone light.
Mode: Switch dynamic mode, short press run the next mode, long press 2s run mode cycle.
Speed/Saturation: For dynamic mode, adjust mode speed, short press 10 levels, long press 2s get the default speed.
For static RGB color, adjust saturation, namely change current static RGB color to mixed white slowly, short press 11 levels, long press 1-6s for continuous 256 levels adjustment.

Brightness: Adjust brightness, short press 11 levels, long press 2s get max or min brightness.
at the same time, the multi-color wheel becomes the brightness wheel.
CCT: Adjust color temperature, short press 11 levels, long press adjust WW+CW brightness at the same time, multi-color wheel become color temperature wheel.
Adjust color temperature by WW/CW channel.

RGB: Adjust static RGB color, short press get 24 kinds of static color. at the same time, multi-color wheels become RGB color wheel.  Multi-color wheel: When it is the brightness wheel, touch to change the brightness. When it is the color temperature wheel, touch to change the color temperature. When it is RGB color wheel, touch to change the RGB color.

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing the battery, pay attention to the battery’s positive and negative polarity.
   A long time without the remote control, remove the battery.
   When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only.

IMPORTER: Prima Group 2004 LTD,
Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor;
Phone: +359 2 988 45 72;

Documents / Resources

| OPTONICA 6387 Ultrathin Touch Wheel RF Remote Controller [pdf] User Manual
6387, 6381, Ultrathin Touch Wheel RF Remote Controller, Wheel RF Remote Controller, Remote Controller, 6387, Controller
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>