OPTONICA 6396 5 Channel Constant Voltage Power Repeater Instructions
- June 4, 2024
- OPTONICA
Table of Contents
**OPTONICA 6396 5 Channel Constant Voltage Power Repeater Instructions
**
Features
- 12-24V constant voltage power repeater.
- 5 channel, 5A per channel.
- To receive PWM signal control.
- Power repeater in series or in parallel to expand output unlimitedly.
- Apply to RGB+CCT constant voltage LED strip or module.
Technical Parameters
Input and Output
nput voltage| 12-24VDC
Input current| 25.5A
Input signal| PWM
Output voltage| 5 x (12-24)VDC
Output curren| 5CH,5A/CH
Output power| 5 x (60-120)W
Output type| Constant voltage
Environment
Operation temperature| Ta: -30 O C ~ +55 O C
Case temperature (Max.)| T c:+85O C
IP rating| IP20
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Certification| CE,EMC,LVD
Warranty and Protection
Warranty| 3 years
Protection| Reverse Polarit
Weight
Net weight| 0.243k g
Gross weight| 0.264k g
Mechanical Structures and Installations
Wiring Diagram
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|---|---|---|
| No light |
- No power.
- Wrong connection or insecure
|
- Check the power.
- Check the connection
Wrong color|
- Wrong connection of R/G/B/WW/CW wires
|
- Reconnect /G/B/WW/CW wires
Uneven intensity between front and rear,with voltage drop|
- Output cable is too long.
- Wire diameter is too small.
- Overload beyond power supply capability.
- Overload beyond controller capability.
|
- Reduce cable or loop supply.
- Change wider wire.
- Replace higher power supply.
- Add power repeater
Safety & Warnings
- The product shall be installed and serviced by a qualified person.
- This product is non-waterproof. Please avoid the sun and rain.
- Good heat dissipation will prolong the working life of the controller,Please ensure good ventilation.
- Please check if the output voltage of any power supplies used comply with the working voltage of the product.
- Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
- If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia,
Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>