OPTONICA 6377 Wall Mounted Touch Panel Instructions

OPTONICA 6377 Wall Mounted Touch Panel Instructions

Features

• Touch panel 4 zone 1-4 color DMX512 master, can also be used as 4 zone 1-4 color RF remote.
• DMX signal output, comply to standard DMX512 protocol, compatible with DMX decoder from any supplier.
• When used as RF remote, each zone can remote control multiple RF 2.4G LED controllers.
• Ultra sensitive high strength glass touch panel with touch color wheel in the middle.
• Smooth and accurate color adjustment by touching the color wheel.
• Touch keys with LED indicator.
• White & Black glass panel available.

Technical Parameters

Input and Output

Input voltage| 100-240VAC
Input current| Max 0.1A
Output signal| DMX512, RF 2.4GHz
Safety and EMC

EMC standard (EMC)

| ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Warranty

Warranty| 3 years
Dimming data

Input signal| Touch key + RF 2.4GHz
RF Control distance| 10m(Barrier-free space)
Dimming level| 256 levels
Dimming range| 0 -100%
Environment

Operation temperature| Ta: -30 OC ~ +55 OC
Case temperature (Max.)| T c: +65OC
IP rating| IP20

Mechanical Structures and Installations

Key function

Turn on key tone: Long press power key for 5s when all zone light is off, will turn on or turn off key tone.

Touch Panel work as DMX512 Master

After connect with DMX decoders, please set the DMX decoders address as below:

Wiring Diagram for touch panel work as RF remote

Malfunctions analysis & troubleshooting

No light

| 1.  No power.

2.  Wrong  connection  or  insecure.

| 1. Check the power.

2. Check the connection.

Wrong color| 1. DMX decoder first address error.

2.  Wrong connection of output wires.

| 1.  Check the DMX first address.

2.  Reconnect output wires.

IMPORTER: Prima Group 2004 LTD, Bulgaria, 1784 Sofia, Mladost 1, bl. 144, Ground Floor; Phone: +359 2 988 45 72;

Touch Panel work as DMX512 master match RF remote

Touch panel 4 zone DMX512 master can also match with 4 zone RF remote (Optional).
End user can choose the suitable match/delete ways. Two options are offered for selection:

Match:
Turn on light, turn off, immediately press the On/Off key of the panel  for 5s,
then press any zone key of the RF remote within 5s.
The LED indicator fast flash 3 times means match is successful.
Delete:
Turn on light, turn off, immediately press the On/Off key of the panel for 10s to delete all match, The LED indicator fast flash 6 times means all matched remotes were deleted.| Match:
Switch off the power of the panel, then switch on power, repeat again.
Immediately short press any zone key 3 times on the remote.
The LED indicator fast flash 3 times means match is successful.
Delete:
Switch off the power of the panel, then switch on power, repeat again.
Immediately short press any zone key 5 times on the remote.
The LED indicator fast flash 6 times means all matched remotes were deleted.

Touch Panel work as RF remote

Touch panel 4 zone remote can match with RF controller for the corresponding light type.
End user can choose the suitable match/delete ways. Two options are offered for selection:

Match:
Short press match key, immediately press zone key of the touch panel.
The LED indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast flash a few times means all matched remotes were deleted.| Match:
Switch off the power of the receiver, then switch on power, repeat again.
Immediately short press zone key 3 times on the touch panel.
The light blinks 3 times means match is successful.
Delete:
Switch off the power of the receiver, then switch on power, repeat again.
Immediately short press zone key 5 times on the touch panel.
The light blinks 5 times means all matched remotes were deleted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>