nVent 16P4I CADDY Push In Conduit Clamp 1 Inch Emt Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent 16P4I CADDY Push In Conduit Clamp 1 Inch Emt
CATALOG NUMBER
16P4I
FEATURES
- Push-in installation of conduit
- Eliminates need for offset bending conduit
- May be used for either vertical or horizontal installations
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- EMT Conduit Size: 1″
- Outer Diameter: 1.181″ Min;1.378″ Max;1.000″ Nom
- Hole Size: 1/4″
- Hole Type: Threaded
- Ultimate Static Load 1: 25 lb
- Ultimate Static Load 2: 15 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
CUSTOMERS SUPPORT
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
nVent.com
CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>