TALON HQSW-T 4-5 Terminal Clapping Jaw Lever Bypass User Manual
- October 30, 2023
- Talon
Table of Contents
TALON HQSW-T 4-5 Terminal Clapping Jaw Lever Bypass
Talon Meter Mounting Equipment General Catalog and Product Schedule
The Talon Meter Mounting Equipment is a set of products designed to help mount and connect electric meters. The Utility specifications may vary, so it is advised to consult the utility prior to installation.
Product Schedule 431
The product schedule 431 includes Type HQSW/T 4-5 Terminal Clamping Jaw Lever Bypass — Offset Style. It is used to bypass power around the meter socket. The product comes with Anti-Inversion Wire Insert (optional). There are other available options such as alternate hasp material, aluminum enclosures, 5 terminal devices, and special labeling which can be obtained by consulting the factory.
Product Dimensions
The product has a width of 16.0 inches and a hub opening that varies based on the model. The HD (Height and Depth) varies based on the model as well. The product has knockouts (inches) labeled with #H59676.
Product Specifications
The product has a continuous amp rating of 320 and can be used in OH (Overhead) or UG (Underground) service. The terminal connector varies based on the model. The product has a number of terminals ranging from 4 to 5. The 5th Jaw Kit is included in some models or can be installed separately using H35815-5. The enclosure catalog number and material varies based on the model.
Product Usage Instructions
Follow the below steps to use Talon Meter Mounting Equipment:
- Select the appropriate Talon Meter Mounting Equipment based on your requirements and consult with the utility prior to installation.
- Install the equipment by following the instructions provided in the user manual.
- Connect the electric meter to the equipment by following the terminal connector specifications provided in the user manual.
- Ensure that the Anti-Inversion Wire Insert is installed (if applicable).
- Consult the factory for other available options such as alternate hasp material, aluminum enclosures, 5 terminal devices, and special labeling.
Talon Meter Mounting Equipment General Catalog and Product Schedule
Product Schedule 431
Type HQSW/T 4-5 Terminal Clamping Jaw Lever Bypass — Offset Style
Common Features
- 320A continuous duty rated
- Offset design for easier UG wiring
- Silver-brazed connections
- 100% rated lever bypass w/clamping action on meter
- Factory installed lugs or 3/8” stud connection
- Steel or aluminum construction
- Glass-filled polyester block construction
- Track-resistant lexan shield
- Plated copper current path
Knockouts (inches):
AC:| 1/4, 1/2
EE:| 2, 2-1/2, 3
HD:| Ø4.281 HUB 0P
RX:| Ø2.750 HUB 0P
Consult the factory for other available options such as, but not limited to alternate hasp material, aluminum enclosures, 5 terminal devices and special labeling.
Cover Style
| Cont. Amp Rating| ****
Service
| Terminal Connector| Dimensions (in.)| ****
Hub Opening
| ****
Barrel Lock KO Prov.
| ****
No. of Term.
| ****
5th Jaw Kit
| ****
Catalog Number
| ****
Enclosure Material
| ****
Type
---|---|---|---|---|---|---|---|---|---|---|---
Line| Load| W| H| D
Ringless| 320| OH/UG| 3/8-24 Stud| 3/8-24 Stud| 16.0| 20.0| 5.0| HD Cl. Plate|
N/A| 4| H35815-5| 44604-02 l| Steel| HQ4SW
Ringless| 320| OH/UG| #4-600 kcmil| #4-600 kcmil| 16.0| 20.0| 5.0| HD Cl.
Plate| N/A| 4| H35815-5| 44604-82 al| Steel| HQ4SW
Ringless| 320| OH/UG| 3/8-24 Stud| 3/8-24 Stud| 16.0| 20.0| 5.0| HD Opening|
N/A| 5| Installed| 44605-036 kl| Steel| HQ4SW
Ringless| 320| UG| 3/8-24 Stud| 3/8-24 Stud| 16.0| 31.0| 5.0| HD Cl. Plate|
N/A| 4| H35815-5| 48004- 02R G ;| Steel| HQ4SW
Ringless| 320| UG| #4-600 kcmil| (2) #4-350 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| N/A| 4| H35815-5| 48004- 8 2 a;| Steel| HQ4SW
Ringless| 320| UG| #4-600 kcmil| (2) #4-350 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| N/A| 5| Installed| 48005-82 a;| Steel| HQ4SW
Ringless| 320| OH/UG| 3/8-24 Stud| 3/8-24 Stud| 16.0| 31.0| 5.0| HD Cl. Plate|
N/A| 4| H35815-5| 48104-02 k| Steel| HQ4SWT
Ringless| 320| OH/UG| #4-600 kcmil| (2) #4-350 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| N/A| 4| H35815-5| 48104-82 s| Steel| HQ4SWT
Ringless| 320| OH/UG| #4-600 kcmil| #4-600 kcmil| 16.0| 31.0| 5.0| 3” Hub
Inst.| N/A| 4| H35815-5| 48144-82 a| Steel| HQ4SWT
Ringless| 320| OH/UG| 3/8-24 Stud| 3/8-24 Stud| 16.0| 31.0| 5.0| HD Cl. Plate|
N/A| 5| Installed| 48105-02FL k| Steel| HQ5SWT
Ringless| 320| OH/UG| #4-600 kcmil| (2) #4-350 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| 7/8”| 4| H35815-5| 48104-82BP s| Steel| HQ4SWT
Ringless| 320| OH/UG| 3/8-24 Stud| 3/8-24 Stud| 16.0| 31.0| 5.0| HD Cl. Plate|
N/A| 4| H35815-5| 48104- 82WI| Steel| HQ4SWT
Ringless| 320| OH/UG| #6-350 kcmil| (2) #4-350 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| N/A| 4| H35815-5| 48104-8201 fk| Steel| HQ4SWT
Ringless| 320| OH/UG| (2) #4-350 kcmil| (2) #4-350 kcmil| 16.0| 31.0| 5.0| HD
Cl. Plate| N/A| 4| H35815-5| 48104-8203 gk| Steel| HQ4SWT
Ringless| 320| OH/UG| (2) #4-350 kcmil| (2) #4-350 kcmil| 16.0| 31.0| 5.0| HD
Cl. Plate| N/A| 4| H35815-5| 48104-8263 hk| Steel| HQ4SWT
Ringless| 320| OH/UG| #4-600 kcmil| #4-600 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| 7/8”| 5| Installed| 48105-83BU a| Steel| HQ5SWT
Ringless| 320| OH/UG| #4-600 kcmil| #4-600 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| N/A| 4| H35815-5| 48104-82TS ad| Steel| HQ4SWT
Ringless| 320| OH/UG| #4-600 kcmil| (2) #4-500 kcmil| 16.0| 31.0| 5.0| HD Cl.
Plate| N/A| 4| H35815-5| 48104-82TX jk| Steel| HQ4SWT
- 60162 lugs are also rated for (2) 2/0-250 kcmil.
- 60162 line lugs, 56732 load side lugs.
- Anti-inversion clip, 59676D, included.
- 58490-1 line lugs and 56732-2 load lugs, 13/32” opening on lugs.
- 56732-2 line and load lugs (13/32” opening).
- 56732 line and load lugs (9/16” opening).
- 60162 line lugs and 56732M load lugs.
- Ground lug included.
- HQSW (446 prefix) are not UL listed for OH applications
- 480XX Series – UG only – meter moved up in device.