TESLA WF60832M Front Loading Washing Machines User Manual

June 13, 2024
Tesla

TESLA WF60832M Front Loading Washing Machines

TESLA -WF60832M -Front -Loading -Washing -Machines -product
image

Product Information

The product is a washing machine available in three models: WF60832M, WF61033M, and WF61063M.
Product images shown in the manual are for illustrative purposes only and may differ from the actual product. The manual provides safety instructions to minimize the risk of fire or explosion, electric shock, property damage, personal injury, or loss of life.
There are three symbols used in the manual to indicate different levels of danger: WARNING (potentially dangerous situation resulting in death or serious injuries), CAUTION (potentially dangerous situation resulting in slight or minor injuries or damage to property and the environment), and NOTE (potentially dangerous situation resulting in slight or minor injuries).
The manual also includes information on responsible disposal of the product to prevent harm to the environment and human health.
The installation section provides details on the product description, including various components such as the water supply hose, detergent dispenser, top cover, control panel, power supply cord, drum, door, drain hose, service filter, and accessories.

Product Usage Instructions

Unpacking the Washing Machine
  1. Remove the cardboard box and styrofoam packing.
  2. Lift the washing machine and remove the base packing. Ensure the small triangle foam is removed along with the bottom one. If not, lay the unit down with the side surface and manually remove the small foam from the unit bottom.
  3. Remove the tape securing the power supply cord and drain hose.
  4. Remove the inlet hose from the drum.
Removing Transport Bolts
  1. Loosen the 4 bolts with a spanner and then remove them.
  2. Stop the holes with transport hole plugs.
  3. Keep the transport bolts properly for future use.
Levelling the Washing Machine
  1. Check if the legs are closely attached to the cabinet. If not, turn them to their original positions and tighten the nu ts.
  2. Loosen the lock nut and turn the feet until they closely contact the floor.
  3. Adjust the legs and lock them with a spanner to ensure the machine is steady.

SAFETY INSTRUCTIONS

For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life.
Explanation of the symbols:
WARNING!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided.
CAUTION!
This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries or damage to property and the environment.
NOTE
This combination of symbol and signal word indicates a potentially dangerous situation which may result in slight or minor injuries.
WARNING!
The electric shock!

  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
  • Before any maintenance the device, unplug the appliance from the mains.
  • Always unplug the machine and turn off the water supply after use. The max. inlet water pressure, in pascals. The min. inlet water pressure, in pascals.
  • To ensure your safety, power plug must be inserted into an earthed three-pole socket. Check carefully and make sure that your socket is properly and reliably earthed.
  • Make sure that the water and electrical devices must be connected by a qualified technician in accordance with the manufacturer’s instructions and local safety regulations.

Risk to children!

  • EN countries: the appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • Children of less than 3years should be supervised to ensure that they do not play with appliance.
  • Animals and children may climb into the machine. Check the machine before every operation.
  • Kids should be supervised that they do not play with the appliance.
  • Glass door may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas.
  • Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result.
  • Plug must be accessible after installation.

Risk of explosion!

  • Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible or explosive substances( such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents, kerosene, etc.) This may result in fire or explosion.
  • Before hand thoroughly rinse items of washing by hand.

CAUTION!
Installing the product!

  • This washing machine is for indoor use only.
  • It isn’t intended to be built-in using.
  • The openings must not be obstructed by a carpet.
  • Washing machine shall not be installed in bath room or very wet rooms as well as in the rooms with explosive or caustic gases.
  • The washing machine with single inlet valve only can be connected to the cold water supply. The product with double inlet valves should be correctly connected to the hot water and cold water supply.
  • Plug must be accessible after installation.
  • Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result.

Risk of damaging appliance!

  • Your product is only for home use and is only designed for the textiles suitable for machine washing.
  • Do not climb up and sit on top cover of the machine.
  • Do not lean against machine door.
  • Cautions during Handling Machine:
    • Transport bolts shall be reinstalled to the machine by a specialized person.
    • The accumulated water shall be drained out of the machine.
    • Handle the machine carefully. Never hold each protruded part on the machine while lifting. Machine door can not be used as the handle during the conveyance.
    • This appliance is heavy. Transport with care.
  • Please do not close the door with excessive forces. If it is found difficult to close the door, please check if the clothes are put in or distributed well.
  • It is forbidden to wash carpets.

Operating the appliance!

  • Before washing the clothes at first time, the product shall be operated in one round of the whole procedures without the clothes inside.
  • Flammable and explosive or toxic solvents are forbidden. Gasoline and alcohol etc.Shall not be used as detergents. Please only select the detergents suitable for machine washing, especially for drum.
  • Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc. may cause serious damages to this machine.
  • Please check whether the water inside the drum has been drained before opening its door.Please do not open the door if there is any water visible.
  • Be careful of burning when the product drains hot washing water.
  • Never refill the water by hand during washing.
  • After the program is completed, please wait for two minutes to open the door.

Packaging/Old appliance
This marking indicates that this product should not be disposed with other household wastes throughout the EU.To prevent possible harm to the environment or human health from uncontrolled waste disposal,recycle it responsibly to promote the sustainable reuse of material resources.To return your used device, please use the collection systems or contact the retailer where the product was purchased. They return and can take this product for environmental safe recycling.

INSTALLATION

Product Description

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(2\)

NOTE
The product line chart is for reference only, please refer to real product as standard.

Accessories

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(3\)
Installation area

WARNING!

  • Stability is important to prevent the product from wandering!
  • Make sure that the product should not stand on the power cord.

Before installing the machine, the location characterized as follows shall be selected:

  1. Rigid, dry, and level surface
  2. Avoid direct sunlight
  3. Sufficient ventilation
  4. Room temperature is above 0 °C
  5. Keep far away from the heat resources such as coal or gas.

Unpacking the washing machine
WARNING!

  • Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
  • There is a risk of suffocation! Keep all packaging well away from children.
    • Remove the cardboard box and styrofoam packing.
    • Lift the washing machine and remove the base packing. Make sure the small triangle foam is removed with the bottom one together. If not, lay the unit down with side surface, then remove the small foam from the unit bottom manually.
    • Remove the tape securing the power supply cord and drain hose.
    • Remove the inlet hose from the drum.

Remove transport bolts
WARNING!

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(7\)

  • You must remove the transport bolts from the backside before using the product.
  • You’ll need the transport bolts again if you move the product , so make sure you keep them in a safe place.

Please take the following steps to remove the bolts:

  1. Loosen 4 bolts with spanner and then remove them.
  2. Stop the holes with transport hole plugs.
  3. Keep the transport bolts properly for future use.

Levelling the washing machine
WARNING!

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(8\)

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(9\)

  • The lock nuts on all four feet must be screwed tightly against the housing.
    • Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts.
    • Loosen the lock nut turn the feet until it closely contacts with the floor.
    • Adjust the legs and lock them with a spanner, make sure the machine is steady.

Connect Water Supply Hose
WARNING!

  • To prevent leakage or water damage, follow the instructions in this chapter!
  • Do not kink, crush, modify or sever water inlet hose.
  • For the model equips hot valve,connect it to hot water tap with hot water supply hose. Energy consumption will decrease automatically for some program.

Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.

  1. Connection between ordinary tap and inlet hose.TESLA -WF60832M -Front -Loading -Washing -Machines -fig \(10\)
  2. Connection between screw tap and inlet hose.

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(12\)
Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise.

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(13\)

Drain Hose
WARNING!

  • Do not kink or protract the drain hose.
  • Position drain hose properly ,otherwise damage might result of water leakage.

There are two ways to place the end of drain hose:

  1. Put the hose into the water drain

  2. Connect it to a drain pipe.

NOTE
If the machine has drain hose support, please install it like the following.

WARNING!
When installing drain hose, fix it properly with a rope.
If drain hose is too long, do not force it into washing machine as it will cause abnormal noises.

OPERATIONS

Quick Start
CAUTION!

  • Before washing, please make sure it’s installed properly.
  • Before washing at first time, the washing machine shall be operated in one round of the whole procedures without clothes in as follows.
  1. Before WashingTESLA -WF60832M -Front -Loading -Washing -Machines -fig \(18\) NOTE
    Detergent need to be added in “case I“ after selecting pre-washing for machines with this function.

  2. WashingTESLA -WF60832M -Front -Loading -Washing -Machines -fig \(19\) NOTE
    If default is selected, step 2 can be skipped.
    The function button line chart is for reference only, please refer to real product as standard.

  3. After Washing
    The door lock and the [Start / Pause ] lights flash with the buzzer beeping or two small points flash on the digital screen.

Before Each Washing
  • The working condition of the washer should be (0-40) °C.If used under 0 °C,the inlet valve and draining system may be damaged. If the machine is placed under condition of 0 °C or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use.
  • Please check the labels and the explanation of using detergent before wash. Use non-foaming or
    less-foaming detergent suitable for machine washing properly.

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(20\)

WARNING!

  • When washing a single clothes, it may easily cause great eccentricity and give alarm due to great unbalance. Therefore it is suggested to add one or two more clothes to be washed together so that draining can be done smoothly.
  • Don’t wash clothes that have been in touch with kerosene, gasoline, alcohol and other flammable materials.

Detergent Dispenser

  •  Prewash detergent
  • Main wash detergent
  • Softener

CAUTION!
Detergent only need to be added in “case I“ after selecting pre-washing for machines with this function.
Model: WF60832M, WF61033M

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(22\)
Model: WF61063M

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(23\)

NOTE

  • As for the agglomerated or ropy detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and overflowing while filling water.
  • Please choose suitable type of detergent for the various washing temperature to get the best washing performance with less water and energy consumption.
Control Panel

Model: WF60832M, WF61033M

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(24\)

Model: WF61063M

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(25\)

NOTE
The chart is for reference only, please refer to real product as standard.

  1. Off
    Product is switched off.

  2. Option
    This allows you to select an additional function and will light when selected

  3. Start/Pause
    Press the button to start or pause the washing cycle.

  4. Programs
    Available according to the laundry type.

NOTE
When the program is finished,the Pause/Start and Door Lock lights flash. (Model: WF60832M, WF61033M).

Option

Prewash
The Prewash function can get an extra wash before main wash,it is suitable for washing the dust off the surface of the clothes; You need to put detergent into the Case (I) when selecting it.
Extra Rinse
The laundry will undergo extra rinse once after you select it.
No Spin
It will not spin if you choose this function.
Model: WF60832M, WF61033M,

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(26\)

Model: WF61063M

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(27\)

Other Functions

Mute the buzzer

To act the buzzer function, press the button again for 3 seconds. The setting will be kept until the next reset.
CAUTION!
After Muting the buzzer function, the sounds will not be activated any more.

Child Lock
To avoid mis operation by children.

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(29\)

CAUTION!

  • Model: WF60832M, WF61033M

    • Only press and hold the two button can release “Child Lock”, even power off, switch off and program end, the “Child Lock” will lock all buttons except power button and “Child Lock“ button.
    • Please release “Child Lock“ before selecting program and starting washing.
  • Model: WF61063M
    When child lock is activated and program starts, child lock indicator will switch on, and the CL and remaining time on the display are alternately displayed in 0.5s. Press the other buttons will make child lock indicator flash for 3s. when program finish,CL and END alternate for 10s in 0.5s, then the child lock lights flash for 3s.

    • Only press and hold the two button can release child lock, even power off, switch off and program end
    • The “Child Lock” will lock all buttons except Power button and Child Lock button please release child lock before selecting program and starting washing.

Speed
The speed is:
800: 0-400-600-800 1000: 0-400-600-800-1000
1200: 0-400-600-800-1000-1200

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(30\)
Programs
Programs are available according to the laundry type.

  1. Synthetic
    Wash synthetic articles, for example: shirts, coats, blending. While washing the knitting textiles, detergent quantity should be reduced due to its loose string construction and light forming bubbles.

  2. Delicate
    For delicate, washable textiles, e.g. made of silk, satin, synth fibers or blended fabrics.

  3. Drum Clean
    It applies 90 °C high temperature sterilization to make the clothes washing more green. When this procedure is performed, the clothes or other washing cannot be added. When proper amount of chlorine bleaching agent is put in the barrel cleaning effect will be better. The customer can use this program regularly according to the need.

  4. Spin Only
    Extra spin with selectable spin speed.

  5. Rinse &Spin
    Extra rinse with spin.

  6. Drain Only
    Drain off the water.

  7. Quick Wash 15’
    It is suitable for washing few and not very dirty clothes quickly.

  8. Cotton Intensive
    To increase the washing effects, washing time is increased.

  9. ECO 40-60
    Default 40°C,not selectable,suitabale for laundry washing at about 40°C-60°C.

  10. Cold Wash
    Cold water to wash clothes.

  11. Cotton
    Hard-wearing textiles, heat-resistant textiles made of cotton orlinen.

  12. **Ends in***
    The function can be set with this program, the total time including washing time and delaying time is 3h,6h or 9h.

Mix**
You can select this procedure wash the tough clothes, that need much more time and strength. It is used for the daily clothes made of cotton, such as sheets, chains, pillowcases bathrobe and underwear.

  • Model: WF60832M, WF61033M
    ** Model: WF61063M
Washing Programs Table

Model: WF60832M, WF61033M

The new EU energy efficiency class is E
Energy test program: ECO 40-60. Speed: the highest speed; Other as the default.
Half load for 6Kg machine:3.25Kg.
The old EU energy efficiency class is A+
Energy test program: Cotton Intensive 60°C/40°C.Speed: the highest speed; Other as the default. Half load for 6Kg machine:3.25Kg.
NOTE
The parameters in this table are only for user’s reference. The actual parameters may be different with the parameters in above mentioned table.
Model: WF61063M

****The new EU energy efficiency class is E
Energy test program: ECO 40-60. Speed: the highest speed; Other as the default.
Half load for 6Kg machine:3.25Kg.
The old EU energy efficiency class is A
Energy test program: Cotton Intensive 60°C/40°C.Speed: the highest speed; Other as the default. Half load for 6Kg machine:3.25Kg.
NOTE
The parameters in this table are only for user’s reference. The actual parameters may bedifferent with the parameters in above mentioned table.

MAINTENANCES

Cleaning and Care

WARNING!
Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
Proper maintenance on the washing machine can extend working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there any water overflow, use the wet cloth to wipe it off immedi No sharp items are allowed.

NOTE
Formic acid and its diluted solvents or equivalent are forbidden, such as alcohol, solvents or chemical products etc.
Cleaning The Drum
The rusts left inside the drum by the metal articles should be removed immediately with chlorine-free detergents. Never use steel wool.
NOTE
Don’t put laundry in the washing machine during the drum cleaning.

Cleaning The Door Seal and Glass
Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leaks. Remove any coins, buttons and other objects from the seal after each wash.

Cleaning The Inlet Filter
NOTE

  • Inlet filter must be cleaned if there is less water.

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(36\)
Washing the filter in the tap

  1. Close the tap.
  2. Remove the water supply hose from the tap.
  3. Clean the filter.
  4. Reconnect the water supply hose.

Washing the filter in washing machine:

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(37\)

  1. Screw off the inlet pipe from the backside of the machine.
  2. Pull out the filter with long nose pliers and reinstall it back after being wash
  3. Use the brush to clean the filter.
  4. Reconnect the inlet pipe.

NOTE

  • If the brush is not clean, you can pull out the filter and wash it separately;
  • Reconnect, turn on the tap.

Clean The Detergent Dispenser

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(38\)

  1. Press down the arrow location on softener cover inside the dispenser drawer.
  2. Lift the clip up and take out softener cover and wash all grooves with water.
  3. Restore the softener cover and push the drawer into position.

NOTE
Do not use alcohol, solvents or chemical products to clean the machine.
Cleaning The Drain Pump Filter
WARNING!

  • Be careful of the hot water!
  • Allow detergent solution to cool down.
  • Unplug the machine to avoid electrical shock before washing.
  • Drain pump filter can filter the yarns and small foreign matters from the washing.
  • Clean the filter periodically to ensure the normal operation of washing machine.

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(39\)

CAUTION!

  • Make sure that valve cap and emergency drain hose are reinstalled properly, cap plates should be inserted aligning to hole plates otherwise water may leak;
  • Some machines don’t have emergency drain hose, rotate lower cover cap directly to make water run into basin.
  • When the appliance is in use and depending on the program selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely re-tightened.

Troubleshooting

The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre.

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(40\)

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(41\)
NOTE
After the check, activate the appliance. If the problem occurs again, contact the service.

Technical Specifications

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(44\)

Product information sheet

Model: WF60832M

COMMISSION DELEGATED REGULATION (EU) 2019/2014 with regard to energy labelling of household washing machines and household washer-dryers

  • Supplier’s name or trade mark: Tesla
  • Supplier’s address: Tesla Electronics, Litijska 47, 1000 Ljubljana, SI
  • Model identifier: WF60832M
  • General product parameters:

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(45\) TESLA -WF60832M -Front -Loading
-Washing -Machines -fig \(46\)

Additional information:

Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 is found: tesla.info
(a) for the eco programme.
Link to the EU EPREL database
The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is possible to find information related to the performance of the product in the EU EPREL database using the link https://eprel.ec.europa.eu and the model name and
product number that you can find on the rating plate of the appliance. For more detailed information about the energy label, visit www.theenergylabel.eu.

Model: WF61033M

COMMISSION DELEGATED REGULATION (EU) 2019/2014 with regard to energy labelling of household washing machines and household washer-dryers

  • Supplier’s name or trade mark: Tesla
  • Supplier’s address: Tesla Electronics, Litijska 47, 1000 Ljubljana, SI
  • Model identifier: WF61033M
  • General product parameters:

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(47\) TESLA -WF60832M -Front -Loading
-Washing -Machines -fig \(48\)

Additional information:

Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 is found: tesla.info
(a) for the eco 40-60 programme.
Link to the EU EPREL database
The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is possible to find information related to the performance of the product in the EU EPREL database using the link https://eprel.ec.europa.eu and the model name and
product number that you can find on the rating plate of the appliance. For more detailed information about the energy label, visit www.theenergylabel.eu.

Model: WF61063M

COMMISSION DELEGATED REGULATION (EU) 2019/2014 with regard to energy labelling of household washing machines and household washer-dryers

  • Supplier’s name or trade mark: Tesla
  • Supplier’s address: Tesla Electronics, Litijska 47, 1000 Ljubljana, SI
  • Model identifier: WF61063M
  • General product parameters:

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(49\) TESLA -WF60832M -Front -Loading
-Washing -Machines -fig \(50\)

Additional information:

Weblink to the supplier’s website, where the information in point 9 of Annex II to Commission Regulation (EU) 2019/2023 is found: tesla.info
(a) for the eco programme.
Link to the EU EPREL database
The QR code on the energy label supplied with the appliance provides a web link to the registration of this appliance in the EU EPREL database.
Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
It is possible to find information related to the performance of the product in the EU EPREL database using the link https://eprel.ec.europa.eu and the model name and
product number that you can find on the rating plate of the appliance. For more detailed information about the energy label, visit www.theenergylabel.eu.

EU DECLARATION OF CONFORMITY

Manufacturer business name: TESLA/COMRADE DISTRIBUTION D.0.0. BEOGRAD
Manufacturer address: BULEVAR ZORANA DINDICA 1251, 11000 BEOGRAD
WE, MANUFACTURER OF BELOW DESCRIBED PRODUCTS, HEREBY DECLARE UNDER OUR SOLE RESPONSIBILITY, THAT THE PRODUCTS TO WHICH THIS DECLARATION RELATES:

product description:

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(51\)

ARE IN CONFORMITY WITH THE FOLLOWING STANDARDS AND LEGISLATIVE ACTS:

TESLA -WF60832M -Front -Loading -Washing -Machines -fig
\(52\)TESLA -WF60832M -Front -Loading -Washing
-Machines -fig \(1\)

Place and date of issue: Belgrade, 10.04.2023.
Signed for and on behalf of manufacturer:

Comtrade Distribution d.o.o. Beograd
Address: Bulevar Zorana Dindica 125l 11000 Belgrade, Serbia
Phone: +381 11 201 55 55
Email:distribution.rs@comtrade.com
www.comtradedistribution.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals