SKYDANCE RM1 6 Key RF Remote Controller User Manual
- June 4, 2024
- SKYDANCE
Table of Contents
SKYDANCE RM1 6 Key RF Remote Controller
Remote Controller
1 zone dimming/6-key/Wireless remote 30m distance/CR2032 battery
Features
- Apply to single color or dual color LED controller.
- Each remote can match one or more receiver.
- CR2032 battery powered.
- Operate with LED indicator light
Technical Parameters
Input and Output
Output signal| RF(2.4GHz)
Working voltage| 3VDC(CR2032)
Working current| ＜5mA
Standby current| ＜2μA
Standby time| 2 years
Remote distance| 30m(Barrier-free space)
Safety and EMC
EMC standard (EMC)| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED
Mechanical Structures and Installations
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
Use the controller’s Match key
Match:
Short press match key, immediately press on/off key on the remote. The LED
indicator fast flash a few times means match is successful.
Delete:
Press and hold match key for 5s to delete all match, The LED indicator fast
flash a few times means all matched remotes were deleted
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again. Immediately short
press on/off key 3 times on the remote. The light blinks 3 times means match
is successful.
Delete:
Switch off the power, then switch on power, repeat again. Immediately short
press on/off key 5 times on the remote. The light blinks 5 times means all
matched remotes were deleted.
Key function
RM1 1 zone dimming remote
- On/Off
- Turn off light ater 3Os, long press 2s will turn ott light after 60s.
- 50% brightness
- 10% brightness tor small night light
- Brightness+
- Brightness-
RM2 1 zone CCT remote
- On/Off
- Turn off light after 30s, long press 2s will turn off light after 60s.
- Color temperature +
- Color temperature
- BrightnesS+
- Brightness
Color temperature+/-:
Short press 11 levels, long press 1-6s for continuous 256 levels adjustment.
Brightness+/-:
Short press 10 levels, long press 1-6s for continuous 256 levels adjustment.
Safety information
- Read all instructions carefully before you begin this installation.
- When installing battery, pay attention to the battery positive and negative polarity. A long time without the remote control, remove the battery. When remote distance becomes smaller and insensitive, replace the battery.
- If no response from the receiver, please re-match the remote.
- Gently handle remote, beware of falling.
- For indoor and dry location use only.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>