NAKAYAMA PRO NS5010 Pressure Sprayer Instruction Manual
- June 4, 2024
- NAKAYAMA PRO
Table of Contents
NAKAYAMA PRO NS5010 Pressure Sprayer
IMPORTANT SAFETY INSTRUCTIONS!
READ CAREFULLY BEFORE USING THE PRODUCT AND KEEP FOR FUTURE REFERENCE!
Safety instructions
The users manual is a part of the sprayer. Please keep it in good conditions. In order to utilize and maintain the sprayer in a good manner, please read the user’s manual carefully prior to operation. It you have any doubt, contact the supplier. The sprayers shall be used only with plant protection products approved by local/national regulatory authorities (e.G. Bba) for plant protection products for use with knapsack sprayers.
Intended use
Fit for pest control of small nursery, flowers and garden, as well as cleaning
of home environment and sterilizing of livestock and fowl houses.
-
Read the instruction before using and keep for future reference!
-
PPE requirement: The operator shall wear a mask, operation hat, protection clothes, water-proof glove and rubber boot etc. in the process of spraying
-
Warehousing and maintaining of pesticide. It shall be kept out of the reach of children. Disposal of pesticide shall follow the safety instructions furnished by its manufac-
turer. -
In case of inhaling: Immediately leave the poisonous place to a well-ventilated place. Make sure ask for medi-cal advice. In case of intoxication via skin contact, please rinse with water immediately.
-
In case of ingestion, induce vomiting with clean water or salt water and go to hospital as soon as possible.
-
Never spray at human beings or animals. Never operate against adverse wind. The sprayer is NOT a toy.
-
Keep far away from heat sources and prevent against exposure to strong sunshine.
-
The residual chemical shall be kept in a con-tainer instead of being poured onto the field, ground and rivers. Empty bottles and bags must be collected and sent to the competent
recycling authority. -
Only trained, healthy and rested operators may work with the product. Do not use the product when tired, ill or under the influence of alcohol, drugs or medication.
Ensure inexperienced users receive a proper training before use. -
Never use strong acid, strong alkaline and inflammable solutions. Never use highly-tox-ic and highly-persistent pesticide for pest control of vegetables, melon crops, fruit trees, tee, herbal medicines etc. And the harvesting time after pesticide application shall be long
enough. -
Don’t keep at a public place unattended which may endanger public security.
-
Do not attempt to remove congestions by blowing into parts of the product with your mouth.
-
Do not connect the product to another pressure source e.g. air compressor.
-
Secure the product against falling, overturn, vibration, extremely high or low temperatures, direct sunlight and impacts during transportation to avoid damages and spillage.
-
Do not attempt to repair or modify the product in any way. Clean and maintain the product as described within this instruction manual. Only use spare parts and accessories recommended by the manufacturer. Repairs shall only be carried out by the manufacturer, its service agent or similarly qualified per-sons. Failure to do so may result in hazard.
-
Check the product regularly each year after winter by using of clean water. Check product before each use
-
Consider wind, rain and other climate and environmental conditions to avoid hazard through uncontrolled or unintended liquid distribution. Avoiding drift during spraying operation.
-
Do not use the sprayer when any leakages, uneven spray jet.
-
The liquid for application in this Sprayer shall not exceed 40°C.
-
Trial spraying with clean water , and a check of tank, hose, shut-off and nozzle for possible leakage are required prior to operation.
-
The preparation of chemical shall follow the instructions and formula furnished by the pesticide manu-facturer. Unauthorized altering of the dilution rate of chemical is prohibited, which may either endanger the human being and animal, or result in the failure of pest control.
Check the volume application rate before work. -
Upon the finish of operation, you shall change clothes and wash those exposed part of body such as hands and face. In case of highly toxic pesticide and germicide, a shower after operation is required to ensure safety.
Technical data
Description of main parts
- The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer’s product line with similar features and may not be included in the product you just acquired.
- Please note that our equipment has not been designed for use in com-mercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.
- To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
- Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even seri-ous injury or death. The manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
Operating instructions
How to Operate the Sprayer
Check to ensure all the parts are available upon unpacking, before
assembling in line with the diagram. 
Before spraying, you shall hold the pumping handle to force its lower end
into the groove of the guide base and turn the handle to remove the pump unit
so as to fill the tank with prepared spray chemical to rated volume, followed
by replacing the pump and pumping to inflate the tank(Make sure the shut-off
valve on Shut position) . When the pressure inside the tank increases, you may
hold-down the shut-off valve to start spot or continual spraying. The nozzle
cap may be varied to select proper spraying type to meet the de-
mands of crops.
-
Control of Shut-off Valve
-
About the Pressure Regulating Valve
The Pressure Regulating Valve is an important device to reduce spraying pulse, maintain the constant pressure, ensure even spraying, minimize environmen-tal pollution and enhance the pest control performance.
The Pressure Regulating Valve is normally-closed with its open pressure set at 1.4±0.2bar and close pressure set at 1±0.15bar. When the pressure inside the tank increases to above the set open pressure, the sprayer starts spraying by holding down its shut-off valve. When the pressure is lower than the close pressure, the regulating valve will shut-off by itself and stop spraying. You shall inflate the tank if you desire to proceed to spray.
Note: Residual pressure will be maintained in the tank even upon the finish of spraying due to the regulating valve. Please release the pressure before removing the pump by following the instructions (as given in the Relief Valve) -
Relief Valve
Relief Valve is an important part of the Air-compressed Sprayer. When the pressure inside the tank exceeds the set value, the Valve will open by itself to discharge a certain amount of air quickly to maintain the internal pressure below\ the set value and ensure reliable and safe operation.
Note: You may lift the valve thimble of the relief valve to relieve the residual internal pressure before removing the pump.
Structural Diagram and Schedule
Cleaning and Maintenance
Upon finish of spraying, repeated flushing and pressurized spraying with clean
water at an allowed place is required till the discharged liquid is
clean.
The strainer at the front end of suction hose can be disassembled for
flushing.
The nozzle shall be flushed with water. Never use a hard tool to remove the
impurities in the nozzle holes. Apply some lubricant to the O-ring in the
nozzle after cleaning.
Warehousing
The Sprayer should be stored in a dry place indoor out of reach of children.
The gas inside the tank shall be released before storage. Pressurized storage
is prohibited.
Troubleshooting
