Glide Gear REVO 50 360 Video Camera Rotating Platform User Manual
- June 5, 2024
- Glide Gear
Table of Contents
Glide Gear REVO 50 360 Video Camera Rotating Platform
What’s included?
Assembly
① Insert the End Guides (C) into the 4 ends of the base (A) as shown in Fig.
② Place the Spinning Element (D) on top of the base with the End Guides facing
the Spinning Element as shown in Fig. 2.
③ Use the 8 screws in Hardware—End Guide (B) to fix the Spinning Element (D)
and the End Guides (C) to the Base (A)
Your assembly should now look like in Fig. 3
④ Slide the Telescopic Poles (E) into the 2 openings in the middle of the
Spinning Element (D). See Fig. 4.
⑤ Slide Arm Clamps (F) onto the smaller poles of the Telescopic Poles (E) as
shown un Fig. 5.
⑥ Slide the Counterweight Platform (G) on the other end of the assembly as
shown in Fig. 6.
⑦ Use the screws in the Hardware– Top Plate (H) to attach the Top Plate (I) to
the top of the Spinning Element (D) as shown in Fig. 7.
⑧ Attach the end of the Telescopic Arm (J) to one the Arm Clamp (F).
⑨ Attach the end of the Telescopic Arm (J) to one the Arm Clamp (F).
Your assembly should now look like in Fig. 8.
⑩ Use the long thumb screw and big washer included with the hardware to lock
in place the counterweight.
Please note that the REVO 150 does not include any counterweights
⑪ Attach the Ball Head (K) at the end of the Telescopic Arm (J).
The final assembly should look like in Fig. 9.
Upside Down Setup
Combined with the Glide Gear OH 150 and 2 C-stands, the REVO 150 can be set upside down to shoot bigger subjects. An example for such a set up is shown in the below picture.
For more information please visit our website:www.glidegear.net
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>