SCHLAGE Medio Series Rivera Door Lever Brushed Instruction Manual

: June 4, 2024
: Schlage

Table of Contents

SCHLAGE Medio Series Rivera Door Lever Brushed
Product Information
Product Usage Instructions
Box contents
Tools Required
CARE AND MAINTENANCE
WARRANTY
Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SCHLAGE Medio Series Rivera Door Lever Brushed

Product Information

Product Series: Medio & Form Series
Functionality: Passage and Privacy
Installation Feature: QuickFixTM
Warranty: 10-year mechanical warranty

Product Usage Instructions

Door Preparation:
Measure 970mm from the floor on both the door and jamb.
Drill Spindle Hole:
Drill a spindle hole at the marked position on both the door and jamb.
Drill Holes:
Drill additional holes as per the provided jig template.
Prepare & Install Latch:
Use the latch as a guide to mark and chisel the latch recess. Install the latch ensuring the curved latch bolt faces the door jamb. Drill pilot holes and secure the latch in place.
Prepare Jamb & Install Strike:
Prepare the jamb for the strike installation by following the provided instructions. Install the strike securely.
Install Furniture:
Attach QuickFixTM furniture using the preinstalled studs and screws.
Install Furniture:
Securely install additional furniture components as per the provided instructions.
Rotate Bezel:
Rotate the bezel to lock it in place.
Tighten Screws:
Ensure all screws are securely tightened to avoid any loose fittings.
Fit Anti-Rotational Screws:
For Form Series applications, fit the anti-rotational screws to prevent rotation.
Fit Rose Cover:
Attach the rose cover to complete the installation.
Fit Privacy Pin (Privacy Only):
If installing a privacy set, fit the privacy pin accordingly.

Care and Maintenance:
Regular maintenance is essential for long-lasting performance. Follow these care instructions to ensure the product’s durability:

Check and tighten fixing screws annually.
Clean door furniture with a soft damp cloth; use mild detergent for stubborn grime (avoid abrasive cleaners).
Lubricate tubular latches used externally at twelve-month intervals.

Warranty Information:
Our products come with guarantees under local consumer law. Refer to our website for finished warranty details.

Frequently Asked Questions (FAQ):

Q: How often should I lubricate tubular latches used externally?
A: Tubular latches used externally should be lubricated with an aerosol lubricant at twelve-month intervals to ensure smooth operation and longevity.
Q: What should I do if I encounter a loose-fitting furniture component?
A: Loose-fitting furniture components should be checked and tightened as required at least annually to prevent any failures that may not be covered under warranty.

Box contents

Rose & lever set – contains 2 factory fitted screws
Strike
Latch
Pack of 6 fixing screws (includes 2 anti-rotational screws)
Jig Template

Door thickness

Passage set 32mm – 50mm
Privacy set 32mm – 42mm

Tools Required

Tape measure
Pencil
Level
Drill
Drill bits – 4mm & 8mm
Spade bit – 25mm
Hammer
Chisel
Screwdriver (Phillips)

Scan here for more information on installing Schlage Medio and Form Series with QuickFix™

DOOR PREPARATION
Measure 970mm from the floor, on door and jamb.
DRILL SPINDLE HOLE
Using the jig, mark and drill Ø25mm spindle hole on both sides of the door.
DRILL HOLES
Position the jig within the drilled spindle hole. Mark 2x holes (labelled QF) and optional privacy (labelled PR). Drill pilot holes Ø4mm from both sides of the door. Re-drill Ø8mm holes on both sides of the door. Drill barrel hole Ø25x85mm.
PREPARE & INSTALL LATCH
Use the latch as a guide to mark and chisel latch recess. Install a latch to ensure the curved latch bolt faces the door jamb. Drill pilot holes and screw in the latch.
PREPARE JAMB & INSTALL STRIKE
Measure Ø8mm on either side of the centre mark, and drill a Ø25x15mm hole. Use strike as a guide to mark and chisel recess, allowing space behind the strike plate for the dust box. Insert dust box, drill holes and screw strike in place.
INSTALL FURNITURE
Attach QuickFix™ furniture with preinstalled studs and screws.
INSTALL FURNITURE
ROTATE BEZEL
Rotate the bezel to lock it in place.
TIGHTEN SCREWS
FIT ANTI-ROTATIONAL SCREWS
Recommend Anti-Rotation screws for all applications (Form Series Only)
FIT ROSE COVER
FIT PRIVACY PIN
PRIVACY ONLY

CARE AND MAINTENANCE

Door Furniture

At twelve (12) monthly intervals, the fixing screws securing the furniture to the door, both surface fix and through the fix, should be checked and tightened as required. Loose-fitting furniture which fails will not be covered under warranty.
All door furniture should only be wiped clean with a soft damp cloth. In the case of Satin Stainless Steel or Satin Chrome Plate, a non-abrasive mild household detergent may be used to remove ingrained grime.

Locks & Latches
Care should be taken to ensure the internal components are kept free of dirt and woodchips during installation as this is the most common cause of malfunction and will not be covered under warranty. Tubular latches used in external situations should be lubricated by an aerosol lubricant at twelve (12) monthly intervals.

Note
For applications that are subject to high use/abuse or in corrosive environments, additional preventative maintenance will be required at a minimum of three (3) monthly intervals.

WARRANTY

Our goods come with guarantees that cannot be excluded under local consumer law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
10-year mechanical warranty.
For a finished warranty, please refer to our website www.allegion.co.nz/finisheswarranty.