ELKO 6PDUW Smart IP Camera Outdoor User Guide

June 4, 2024
ELKO

6PDUW Smart IP Camera Outdoor

Product Information

Specifications:

  • Brand: ELKO
  • Product Name: Smart IP Camera Outdoor
  • Model: EKO07255

Description:

The Smart IP Camera Outdoor by ELKO is designed to provide
advanced surveillance capabilities for outdoor environments. It
offers a range of features to enhance security and monitoring.

Product Usage Instructions

Safety Information:

It is important to carefully read and understand the safety
information provided in the manual before installing, operating,
servicing, or maintaining the Smart IP Camera Outdoor. Failure to
adhere to safety instructions can result in personal injury or
equipment damage.

Installation:

Follow the installation guide provided with the product to
securely mount the camera in the desired outdoor location. Ensure
the camera is positioned for optimal coverage and visibility.

Configuration:

Connect the camera to a power source and a compatible network
using the provided cables. Follow the setup instructions to
configure the camera settings such as resolution, motion detection,
and remote access.

Monitoring:

Access the camera feed through the designated software or app on
your device. Monitor the live footage, adjust settings as needed,
and review recorded footage for security purposes.

Maintenance:

Regularly check and clean the camera lens to ensure clear image
quality. Keep the camera housing free from dirt and debris. Update
firmware as recommended by the manufacturer for optimal
performance.

FAQ

Q: What should I do if the camera encounters connectivity

issues?

A: Check your network connection, restart the camera, and ensure
that you have entered the correct network credentials. Contact
customer support if connectivity problems persist.

Q: How can I reset the camera to factory settings?

A: Refer to the user manual for instructions on resetting the
camera to its factory settings. This may involve pressing a reset
button or using specific software commands.

6PDUW ,3&DPHUD 2XWGRRU
‘HYLFH 8VHU *XLGH
,QIRUPDWLRQDERXWIHDWXUHV DQGIXQFWLRQDOLW RIWKHGHYLFHV
www.elko.no

/HJDO ,QIRUPDWLRQ
The information provided in this document contains general descriptions, technical characteristics and/or recommendations related to products/solutions.
This document is not intended as a substitute for a detailed study or operational and site-specific development or schematic plan. It is not to be used for determining suitability or reliability of the products/solutions for specific user applications. It is the duty of any such user to perform or have any professional expert of its choice (integrator, specifier or the like) perform the appropriate and comprehensive risk analysis, evaluation and testing of the products/solutions with respect to the relevant specific application or use thereof.
The ELKO brand and any trademarks of ELKO AS and its subsidiaries referred to in this document are the property of ELKO AS or its subsidiaries. All other brands may be trademarks of their respective owner.
This document and its content are protected under applicable copyright laws and provided for informative use only. No part of this document may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of ELKO.
ELKO does not grant any right or license for commercial use of the document or its content, except for a non-exclusive and personal license to consult it on an “as is” basis.
ELKO reserves the right to make changes or updates with respect to or in the content of this document or the format thereof, at any time without notice.
7R the extent permitted by applicable law, no responsibility or liability is assumed by ELKO and its subsidiaries for any errors or omissions in the informational content of this document, as well as any non-intended use or misuse of the content thereof.

Table of Contents
Safety Information……………………………………………………………………………4 Smart IP Camera Outdoor……………………………………………………………….5
For your safety ………………………………………………………………………………5 About the device……………………………………………………………………………..5 Installing the device …………………………………………………………………………5 Pairing the device ……………………………………………………………………………6 Configuring the device ……………………………………………………………………..7
Changing the device icon …………………………………………………………….7 Renaming the device ………………………………………………………………….8 Changing the device location ………………………………………………………..8 Configuring basic function settings …………………………………………………9 Configuring IR night vision ……………………………………………………………9 Setting image quality…………………………………………………………………10 Setting offline notification…………………………………………………………… 11 Removing the device ……………………………………………………………………..12 Using the device……………………………………………………………………………13 Using private mode …………………………………………………………………..14 Motion detection setting……………………………………………………………..14 Setting privacy zone………………………………………………………………….16 Playback ………………………………………………………………………………..18 Storage settings……………………………………………………………………….21 Creating a moment …………………………………………………………………..21 Creating an automation ……………………………………………………………..23 LED indications …………………………………………………………………………….27 Troubleshooting ……………………………………………………………………………27 Technical Data ……………………………………………………………………………..28

DUG_Smart IPC Outdoor_ELKO-00

3

Safety Information

Safety Information

Important Information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that accompany this symbol to avoid possible injury or death.

DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. Failure to follow these instructions will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.

4

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor
Smart IP Camera Outdoor

EKO07255
For your safety
NOTICE
RISK OF DAMAGE TO DEVICE Always operate the product in compliance with the specified technical data. Failure to follow these instructions can result in equipment damage.
About the device
The Smart IP camera outdoor (hereinafter referred as IP Camera) is a Wi-Fi® operated device that is used to monitor sensitive outdoor areas of your home with a HD recording. You can install the camera indoors or outdoors in all directions (e. g. on the wall, under the roof, etc.). The IP camera can be triggered by other devices (such as sensors). Advantages of using an IP camera:
· High-level security · High resolution recording · Covers a wide area · Infrared night vision for low light recording
NOTE: Users are solely responsible for adhering to applicable privacy laws, e. g. the GDPR, Article 5. Users must ensure that guarantees are taken to avoid any misuse of equipment for surveillance or entirely different and unexpected purposes than intended.
Installing the device
Refer to the installation instruction supplied with this product. See Smart IP Camera Outdoor.

DUG_Smart IPC Outdoor_ELKO-00

5

Pairing the device

Smart IP Camera Outdoor

Using the ELKO Smart app, pair your device with the local Wi-Fi network to register on cloud to access and control the device. To pair the device:
1. On the Home page, tap + and tap . 2. Select the Wi-Fi network, enter the Password (A) and tap Next.
NOTE: Make sure to first connect your mobile phone to the home Wi-Fi and select 2.4 GHz network.
Cancel
Select 2.4GHz Wi-Fi Network and enter Password.
If your Wi-Fi is 5GHz, please set it to be 2.4GHz.

A
Password
Next
3. Plug-in the power cable to a power supply to power on the device. Make sure that the LED blinks red.
4. In the ELKO Smart app, select next step and tap Start Configuration (B).
Cancel How to pair device 1. Power on the device

next step
B

6

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor

5. Wait for a few seconds until the LED blinks blue and becomes stable.
The blue LED on the IP camera shows that it is successfully connected to the Wi-Fi network and ready to use.

6. After the device is connected, tap Done.
Configuring the device
Changing the device icon
You can change the device icon using the ELKO Smart app. 1. On the Home page, select the device for which you wish to change the icon.
2. At the top-right corner of the screen, tap . 3. Tap edit next to the device name. 4. Tap Icon to view the menu. 5. In the slide-up menu, select any one of the following (A) to change the device
icon: ­ Take photo – allows you to take a photo with your device camera. ­ Select from Icon Library: allows you to select an icon from the app
library. ­ Select from Album: allows you to select a photo from the mobile gallery.

Icon Name Location

Take photo

Select from Icon Library

A

Select from album

Cancel

DUG_Smart IPC Outdoor_ELKO-00

7

Smart IP Camera Outdoor
Renaming the device
You can rename the device using the ELKO Smart app. 1. On the Home page, select the device for which you wish to rename. 2. At the top-right corner of the screen, tap . 3. Tap edit next to the device name. 4. Tap Name, enter the new name (A) and then tap Save.

Icon

Rename

Name LocationCancel

A
Save

Changing the device location

You can change the device location using the ELKO Smart app. 1. On the Home page, select the device for which you wish to change the location.

2. At the top-right corner of the screen, tap .

3. Tap edit next to the device name. 4. Tap Location. 5. Select the desired location from the list (A) and then tap Save.

Device location

Save

Living Room Master Bedroom Kitchen
A
Dining Room Study Room Kids Room

8

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor
Configuring basic function settings
The basic function settings allows you to enable the Status indicator on the device and the Time watermark on the ELKO Smart app.

Status indicator

Enabling the Status indicator turns on/off the LED on the device. To enable the Status indicator:
1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap and tap Settings > Basic function settings. 3. Tap the toggle switch (A) to enable the Status indicator.
NOTE: The LED indicates blue on the device when the status indicator is turned on.

Time watermark

Enabling the Time watermark displays the date and time on the live view on control panel. To enable the Time watermark:
1. On the Home page, tap All devices > IP Camera Outdoor.

2. Tap and tap Settings > Basic function settings. 3. Tap the toggle switch (B) to enable the Time watermark.

Basic function settings

Status indicator

A

B

Configuring IR night vision
The infrared LEDs in the camera allows you to see and record a clear black and white video/image in the dark. To configure the IR night vision:
1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap and tap Settings > IR night vision.

DUG_Smart IPC Outdoor_ELKO-00

9

Smart IP Camera Outdoor 3. Select any one of the following options:
­ Auto: turns on/off automatically when the environmental light is below/ above a certain threshold of the lux level.
­ Off: turns off the IR night vision at all times. ­ On: turns on the IR night vision at all times.
IR night vision
Auto On
Setting image quality
Using the ELKO Smart app, you can change the image quality based on your requirement.
TIP: You can switch to Standard Definition image quality when the Wi-Fi is slow or the memory card storage space is less. 1. On the Home page, tap All devices > IP Camera Outdoor. 2. Tap and tap Settings > Image Quality. 3. Select any one of the options: ­ Standard Definition (SD): captures low resolution video/image. ­ High Definition (HD): captures high resolution video/image.
Image quality
Notice:

10

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor
Setting offline notification
Using the ELKO Smart app, you can receive a notification when the IP camera is offline. To turn on the offline notification:
1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap and tap Settings. 3. Tap the toggle switch (A) to turn on the Offline notification and tap Confirm.
Settings

Privacy Zone
Others
Share device

On
A
No updates available.

DUG_Smart IPC Outdoor_ELKO-00

11

Removing the device

Smart IP Camera Outdoor

Using the ELKO Smart app, you can remove a device from the device list. To remove the device:
1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap and tap Settings. 3. Tap Remove device (A) and tap Confirm.
Settings

On Privacy Zone

Others
Share device

No updates available.

A
TIP: On the Home page, tap and hold the IP Camera Outdoor to remove the device. NOTE:
· Removing the device will reset the device. The LED starts blinking red indicating that the device is ready to pair with another network.
· If there is a problem while pairing, refer to troubleshooting, page 27.

12

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor
Using the device
Using the control panel of the IP Camera, you can see live video of the outdoors on the display screen and includes the following features:
Enables audio of the live video
Makes the video fullscreen
Takes screenshot of the live view
Lets you communicate with a person near the device Records the live view
Enables motion detection Enables private mode
View the stored images or videos
NOTE: · To view the notification/alarm messages, tap > Message. · To review the recordings using playback feature, refer to Playback, page 18.

DUG_Smart IPC Outdoor_ELKO-00

13

Smart IP Camera Outdoor
Using private mode
The private mode allows you to turn off the live view, thereby disabling all the other features on the control panel for all users connected to the same Zigbee network. Using this mode, the user can stay confidential during private moments. To turn on the private mode:
1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap > Settings. 3. Tap the toggle switch to turn on the Private Mode. 4. Alternatively, tap Private Mode (A) on the control panel.
IP Camera Outdoor

Screenshot

Record

Private Mode
A

Motion detection setting
The motion detection function enables the IP camera to detect motion in the surveillance area and display notifications in the ELKO Smart app. To enable the motion detection:
1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap and tap Settings > Motion Detection . 3. Tap the toggle switch (A) to turn on the Motion Detection Alerts.
TIP: Alternatively, you can tap the on the control panel.
Alarm sensitivity level
Using the ELKO Smart app, you can adjust the sensitivity level of your motion detector. Tap Alarm Sensitivity Level (B) and select any one of the following levels: ­ Low ­ Medium ­ High
NOTE: The high sensitivity level detects the slightest movement and triggers an alarm.

14

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor
Activity area

Using the ELKO Smart app. you can set the surveillance area for motion detection.
1. Tap the toggle switch (C) to enable the Activity area.
2. Tap Detection Area Settings (D) and drag/resize the red frame to set the surveillance area and tap Save.
NOTE:
· The motion is detected only in the saved surveillance area.
· The privacy zone detection area setting overrides the motion detection activity area setting. Therefore, even if the motion detection activity area is larger than the privacy zone detection area, the motion will only be detected within the privacy zone detection area.

29-09-2021 15:56:35

Motion Detection

Motion
Motion Detection Alerts
B Alert Sensitivity Level
Activity Area
D Detection Area Settings
Alert Timer settings

A
Medium
C
Edit

Schedule

Cancel

Save

DUG_Smart IPC Outdoor_ELKO-00

15

Smart IP Camera Outdoor

Scheduling detection alarm

Using the ELKO Smart app, you can add a schedule that allows you to turn off/on motion detection automatically based on your needs. To schedule the motion detection:
1. On the Home page, tap All devices > IP Camera Outdoor.

2. Tap and tap Settings > Motion Detection > Schedule. 3. Tap Add schedule and set the time (A). 4. Tap Repeat (B) and select the days you want the schedule to repeat. 5. Tap Note (C), enter the note and tap Confirm. 6. Tap the toggle switch (D) to turn on the Notification for the schedule. 7. Tap Motion detection (E), select one of the options:
­ On: turns on the motion detection on the scheduled time. ­ Off: turns off the motion detection on the scheduled time.

Add schedule

Save

09 43

A

10 44

11 45

B Repeat C Note
E Motion detection
where the device is located.

Once
D

8. Tap Save.
Setting privacy zone
The Privacy Zone settings allows you to set the surveillance area for monitoring the live view. To set the privacy zone:
1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap and tap Settings > Privacy Zone. 3. Tap the toggle switch (A) to turn on the Privacy Zone.

16

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor

4. Tap Privacy Zone Settings (B) and drag/resize the red frame to set the surveillance area and tap Save. The live view on the control panel will show only the saved privacy zone. NOTE: The privacy zone detection area setting overrides the motion detection activity area setting. Therefore, even if the motion detection activity area is larger than the privacy zone detection area, the motion will only be detected within the privacy zone detection area.
Privacy zone settings

Monitor Privacy Zone

A

B

29-09-2021 15:56:35

Cancel

Save

IP Camera Outdoor
29-09-2021 15:56:35

Screenshot

Record

Private Mode

DUG_Smart IPC Outdoor_ELKO-00

17

Playback

Smart IP Camera Outdoor
Using the ELKO Smart app, you can review the recording whenever you want with the Playback feature.
NOTE: You need to insert a micro-SD card (max 128 GB) to use the playback feature. Refer instruction sheet. 1. On the Home page, tap All devices > IP Camera Outdoor. 2. Tap and tap Settings > Play Back. The control panel of the playback consists of:

Select the recording date and time

Click screenshot of the video

/

Pause/play the recording

Record the video
NOTE: · A display screen on the control panel shows the previous recordings. · The screenshot/recording will be saved in the album.

18

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor

Recording Settings
To change the recording settings: 1. On the Home page, tap All devices > IP Camera Outdoor.
2. Tap and tap Settings > Recording Settings. 3. In the Recording Settings section, tap the toggle switch (A) to enable the
Local Recording. NOTE: The recording will be saved to the micro-SD card.
4. Tap Recording Mode (B) and select one of the options: NOTE: Recording Mode is enabled only when you turn on the Local Recording toggle switch.
­ Event Recording: records only when there is a motion detection. ­ Non-Stop: records continuously for 24 hours.
Recording settings

A B
Schedule

Non-stop

DUG_Smart IPC Outdoor_ELKO-00

19

Smart IP Camera Outdoor

Scheduling playback

Using the app, you can add a schedule that allows you to turn off/on recording automatically based on your needs. To schedule the recording:
1. On the Home page, tap All devices > .

2. Tap and tap Settings > Recording Settings > Schedule. 3. Tap Add schedule and set the time (A). 4. Tap Repeat (B) and select the days you want the schedule to repeat. 5. Tap Note (C), enter the note and tap Confirm. 6. Tap the toggle switch (D) to turn on the Notification for the schedule. 7. Tap Local Recording (E), select one of the options:
­ On: turns on the recording during the scheduled time. ­ Off: turns off the recording during the scheduled time.
NOTE: The recording will be saved to the memory card.

Add schedule

Save

AM 02 44

A

PM 03 45

04 46

B Repeat C Note
E
where the device is located.

Once
D
On

8. Tap Save.

20

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor

Storage settings

To change the recording settings: 1. On the Home page, tap All devices >.
2. Tap and tap Settings > Storage Settings. 3. In the Storage Settings section, tap Format (A) to format the inserted micro-
SD card. IMPORTANT: This will delete all the data stored on the micro-SD card.
Storage settings

Total capacity Used

3.71 GB 3.56 GB 0.15 GB

A

Creating a moment
A Moment allows you to group multiple actions that are usually done together. Using the ELKO Smart app, you can create moments based on your needs (such as movie night).
1. On the Home page, tap . 2. Go to Moment > + to create a moment.
3. Tap Edit name , enter the name of the moment (A) and tap Save. TIP: You can choose the cover image that best represents your moment by tapping .
Cancel Moment settings Save
Edit name

Action
A

Edit name Add Task

(0/10)

Cancel

Save

DUG_Smart IPC Outdoor_ELKO-00

21

Smart IP Camera Outdoor
4. In the Action section, tap Add task (B) to open the slide-up menu. 5. In the Add task menu, you can do either or all of the following actions (C):
­ Run the device: select the devices that you want in a moment. ­ Select Automation: select the automation that you want to enable or
disable. For more info refer to Automation, page 23. ­ Delay: set the delay time. NOTE: You can add one or more actions using .
Cancel Moment settings Save
Edit name

Action

(0/10)

Add Task

B

Add Task

Run the device

Select Automation

C

Delay

6. Tap Run the device > IP Camera Outdoor to select either or all of the functions to add in the moment: ­ Private Mode: turn on/off the private mode (D). ­ Record Switch: turn on/off the recording (E). ­ Recording Mode: select the type of recording (F). ­ Privacy Area Switch: turn on/off the privacy zone (G).

Select function

Next

D Private Mode E Record Switch F G Privacy Area Switch

7. Set all the actions and tap Save.

22

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor
Editing a moment

To edit a moment:
1. On the Moment tab, locate the moment you want to edit and tap .
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, temperature, etc.) to change the settings. TIP:
· You can add one or more actions using . · To delete an existing action, slide the each item towards left and tap
Delete.

Deleting a moment
To delete a moment: 1. On the Moment tab, locate the moment that you want to delete and then tap . 2. Tap Delete and then tap Ok. NOTE: After deleting a moment, the device action can no longer be triggered.

Creating an automation
An automation allows you to group multiple actions that are usually done together, triggered automatically or at scheduled times. By using the ELKO Smart app, you can create automations based on your needs.
1. On the Home page, tap the . 2. Go to Automation > + to create an automation.
3. Tap Edit name , enter the name of the automation (A) and tap Save. TIP: You can choose the cover image that best represents your automation by tapping .
Cancel Automation settings Save
My Automation

Any condition is met Edit name

(0/10)

Add Condition
A

Action Cancel

(ASdadvede 0/80)

Add Task

All-Day

DUG_Smart IPC Outdoor_ELKO-00

23

Smart IP Camera Outdoor
4. Tap Any condition is met to select any one of the condition type (B): ­ All conditions are met: the automation is triggered when all the conditions are met. ­ Any condition is met: the automation is triggered when at least one condition is met.
Cancel Automation settings Save
My Automation

Any condition is met

(0/10)

Add Condition

Action

(Added 0/80) Add Task

Select Condition type
All conditions are met
B
Any condition is met
Cancel

5. Tap Add Condition to open the slide-up menu. 6. In the Add Condition menu, you can do either or all of the following options
(C): ­ When weather changes: select the various weather settings. ­ Schedule: set the time and day. ­ When device status changes: select the device and it’s function.
Note: You can add one or more conditions using .
Cancel Automation settings Save
My Automation

Any condition is met

(0/10)

Add Condition

Add Condition

When weather changes

Schedule

C

When device status changes

7. Tap When device status changes > Window/Door Sensor > Open. NOTE: This is an example of an automation to switch on the Event Recording when the Window/Door is Open.
8. Tap Add task to open the slide-up menu.

24

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor

9. In the Add task menu, you can do either or all of the following options (D): ­ Run the device: select the devices that you want to be triggered. ­ Moment or Automation: select the moment which you want to trigger or select the automation that you want to enable or disable. ­ Send notification: turn on notification for the automation. ­ Delay: set the delay time.
NOTE: You can add one or more actions using .
Cancel Automation settings Save
My Automation

Any condition is met Add Condition

Action

Add task

Run the deAvdidceTask

D
All-Day

10. Tap Run the device > IP Camera Outdoor > Recording Mode 11. Select Event Recording and tap Save.

Select function

Next

Private Mode Record Switch

Privacy Area Switch

Cancel

Save

DUG_Smart IPC Outdoor_ELKO-00

25

Smart IP Camera Outdoor
12. Tap on Effective period to set the time range for the automation. You can select any one of the following (E): ­ All-day – 24 hours ­ Daytime – From sunrise to sunset ­ Night – From sunset to sunrise ­ Custom – User defined time period
Next All-day 24 hours
E
Repeat City
13. Set all the actions and conditions and tap Save. Automation is now available under Automation tab. Use toggle switch to enable/disable automation.
Editing an automation
To edit an automation: 1. On the Automation tab, locate the automation you want to edit and tap . 2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, temperature, etc.) to change the settings. TIP: · You can add one or more actions using . · To delete an existing condition or action, slide each item towards left and tap Delete.
Deleting an automation
To delete an automation: 1. On the Automation tab, locate the automation that you want to delete and then tap . 2. Tap Delete and tap Ok. NOTE: After deleting an automation, the device action can no longer be triggered.

26

DUG_Smart IPC Outdoor_ELKO-00

Smart IP Camera Outdoor
LED indications
LED Indication LED is Solid red
LED blinks red
LED is Solid blue
LED blinks blue

Status Device is initiated successfully.
Device is in reset mode. Device is ready for pairing Device is initiating. The connection is successful. Device is pairing to the network. The device is offline.

Troubleshooting
Symptom The device is not ready to pair after the device is removed from the app.

Possible cause The device is not reset correctly.

Solution
Remove the lid on the back of the camera and press the reset push button for 5 seconds to reset the device.

The device does not respond.

Wrong Wi-Fi credentials are entered during the pairing process.
NOTE: You must log into 2.4 GHz network.

The Smart IP Camera Outdoor cannot connect to the internet via the Wi-Fi network router.

The router port settings may not be properly set for system access to the internet.

Check that the following router ports are open:
· Port 6667 · Port 6666 · Port 6668 · Port 6669 · Port 1883 · Port 8886 · Port 8883 · Port 443
IMPORTANT: For cyber-security, check that all unused ports are closed.

DUG_Smart IPC Outdoor_ELKO-00

27

Technical Data
Nominal voltage Power supply Power consumption Operating temperature Operating humidity Protection class
Cable length
Operating frequency Max. radio-frequency power transmitted Wi-Fi® standard Wi- Fi® security Channel bandwidth Data security Resolution Wide angle lens
Night vision IR range Local storage support

Smart IP Camera Outdoor
AC 100­240 V, 50/60 Hz 12 VDC, 1A max. 6 W -20 °C to 60 °C < 95% RH IP Camera : IP56 Power supply : IP20 Connector : IP20 IP Camera to connector : 0.6 m Power supply to connector : 1.5 m 2405 ­ 2480 MHz < 100 mW IEEE 802.11 b/g/n 2.4 GHz WPA-PSK/WPA2­PSK Support 20/40 MHz AES128 1080p 103° horizontally 54° vertically 10 m Micro SD card, max. 128 GB SDHC and SDXC type micro-SD cards with FAT32 format are supported

28

DUG_Smart IPC Outdoor_ELKO-00

EU Declaration of Conformity
Hereby, ELKO, declares that this product is in compliance with the essential requirements and other relevant provisions of RADIO EQUIPMENT DIRECTIVE 2014/53/EU. Declaration of conformity can be downloaded on ELKO.no.
Trademarks
This guide makes reference to system and brand names that are trademarks of their relevant owners.
· Zigbee® is a registered trademark of the Connectivity Standards Alliance. · Apple® and App Store® are brand names or registered trademarks of Apple Inc. · Google PlayTM Store and AndroidTM are brand names or registered trademarks
of Google Inc. · Wi-Fi® is a registered trademark of Wi-Fi Alliance®. Other brands and registered trademarks are the property of their respective owners.

ELKO AS Sandstuveien 68, 0680 Oslo Pb 6598 Etterstad, 0607 Oslo Norway
+47 67 79 39 00 support@elko.no www.elko.no
As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.
© 2023 ­ 2023 ELKO. All rights reserved. DUG_Smart IPC Outdoor_ELKO-00

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals