SILVERSTONE CS382 SATA-6G Hot Swappable High Performance NAS Chassis User Manual

SILVERSTONE CS382 SATA-6G Hot Swappable High Performance NAS Chassis

Product Information

The CS382 is an 8-bay SAS-12G / SATA-6G hot-swappable high-performance NAS chassis. It is designed to provide efficient storage and data management for various applications. More information about the product can be found on the manufacturer’s website: www.silverstonetek.com.

Product Usage Instructions

1. Open the front panel: To access the interior of the chassis, open the front panel by pressing the latch and removing the door.
2. Remove side panels: To further access the internal components, remove the side panels by unscrewing the 2 screws on each side.
3. Remove the hot-swap drive module: Securely remove the screws that hold the hot-swap drive module in place and extract it from the front side of the chassis.
4. Install motherboard standoff: Install the motherboard standoff based on the specification of the motherboard. Consider the CPU cooler height limitation when determining the appropriate installation height.

Please refer to the installation guide provided with the product for detailed instructions and illustrations.

• www.silverstonetek.com

Accessory Content

• KEY
  Open/Lock door

• ODD bracket
  Fixed ODD Motherboard standoff -M3x6.5H-6-32 Motherboard support

• SCREW-P-M2*4-BK Mounting for slim ODD

• SCREW-I-6-32*5-BK Mounting for motherboard, PSU, 3.5” HDD and ODD bracket

• SCREW-PW-M3*4-BK Mounting for 2.5″ SSD, 5.25″ ODD

• SCREW-TF-M3*6-BK Mounting 2.5″ SSD

• STANDOFF-SOCKETWRENCH Standoff socket

Installation Guide

• Open the front panel, then press the latch to remove the door
• Remove side panels by removing the 2 screws on each side
• Remove the screws securing the hot-swap drive module, then extract the module from the front side
• Install motherboard standoff based on the specification of the motherboard installed
• CPU cooler height limitation: <168mm
• CPU cooler is allowed to protrude the edge of the motherboard by 6.8mm
• Install PSU
• PSU length limitation: 200mm
• We recommend installing PSUs with length of 180mm to allow room for cables and to ease cable management
• Remove the screws attaching the bottom hard drive tray, insert 3.5” HDD into the tray then secure back into the case
• Install 2.5” devices
• Remove slim ODD cover to install slim ODD device
• Install 5.25” device Installing a 5.25″ device will interfere with the top panel component, thereby preventing the installation of 240mm/280mm radiators
• We recommend to connect the power / front IO / SATA connectors on the motherboard at this stage.
• Insert hot-swap drive module back into the case and secure with screws, then connect power and SATA cables to each drive
• Install graphics card The length limitation for expansion slots 1 to 2 is <369mm. Width limitation is 174mm. The length limitation for expansion slots 3 to 5 is 220mm. Removing the 5.25″ support bracket increases the clearance to 369m
• Ensure all cables and wirings are connected, reattach the side panels then secure with screws
• Extract the hot-swap module drive trays to install 3.5” or 2.5” devices. Connect the tool-free mechanism to the devices then secure back to the module
• Press the latch to reattach the front panel

Components Limitation

Top panel: 120mm/140mm/240mm/280mm, Radiator x 1
When installing 140mm/280mm radiators on the top panel, with the total thickness of fans and radiator equating to 55mm, the distance to the motherboard is left with 20mm total clearance. If you wish to install the SATA cable in this position, it’s recommended to purchase SilverStone’s CP11 ultra- thin cable and low-profile connectors SATA cable to improve compatibility and convenience of build assembly. See figure B.

Rear panel: 120mm, Radiator x 1
If the height of components on the motherboard near the corresponding area of the radiator is less than 50mm, there is no limitation on the thickness of the radiator.

RECOMMENDED COOLING CONFIGURATION

If your motherboard has a fan speed monitoring function, it is recommended to connect the 90mm PWM fan attached to the hard drive tray module to the fan header on the motherboard. This will allow you to adjust the fan speed according to your desired settings.

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
   • Usage in accordance with instructions provided in the manual, with no misuse, overuse, or other inappropriate actions*.
   • Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
   • Product is not modified or components replaced resulting in out of spec. operation.
   • Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand purchaser
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone http://www.silverstonetek.com.

Please note that : (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com. for the latest updates.

Additional info & contacts For North America usasupport(at)silverstonetek.com
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested. Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions. http://silverstonetek.com/contactus.php

For Australia only support(at)silverstonetek.com
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Please refer to above “Warranty terms & conditions” for further warranty details. SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. +886-2-8228-1238 (standard international call charges apply)

• For Europe support.eu(at)silverstonetek.de
• For China support(at)silverstonetek.com.cn
• For Japan support_jp(at)silverstonetek.co.jp
• For all other regions support(at)silverstonetek.com
• www.silverstonetek.com
• support@silverstonetek.com

References

• 無標題文件
• Support.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>