Ideal FURNITURE DST1875 Eternity Single Sided Workstation Desk Instruction Manual

Table of Contents

Q: Are assembly tools included with the product?
- A: No, assembly tools such as screwdriver, electric drill, pencil, and measuring tape/ruler are not included with the product.
Q: What is the skill level required for assembly?
- A: The skill level required is rated as Easy for the average person

TOOLS REQUIRED:

SKILL REQUIRED:

Easy Hard
The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert.
For most products, two persons are recommended.
Please note, as this is a commercial product, some intermediate skills are required.
No pre-drill holes or markings are provided on tops.

NOTE

As this is a commercial product, some intermediate skills may be required.
No pre-drill holes or markings are provided on our tables or desktops.
Please check you have all the hardware before assembling.
If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part, and quantity.
Please retain your receipt as proof of purchase to validate your warranty.
Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
Remove all wrapping materials, including staples and packing straps before you start to assemble
Keep all hardware parts out of reach of children.

CAUTION

Heavy product. Do not attempt to lift or move without help
Do not tighten screws and bolts until completely assembled.
Do not use this product unless all bolts and screws are firmly secured and tightened.

WARNING

If parts are missing, broken, damaged, or worn stop using the product until all repairs are made.
Failure to follow these warnings could result in serious injury.

TABLE 01

MODEL NO: Eternity Single-Sided Workstation without Screen

$Ideal-FURNITURE-DST1875-Eternity-Single-Sided-Workstation-Desk-FIG-1 $1$$

IMPORTANT NOTE:

Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Don’t tighten all screws/bolts until all completely assembled.
Keep all hardware parts out of reach of children

TABLE 2

MODEL NO: Eternity Single-Sided Workstation without Screen – 2 Person

$Ideal-FURNITURE-DST1875-Eternity-Single-Sided-Workstation-Desk-FIG-1 $3$$

IMPORTANT NOTE:

Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Don’t tighten all screws/bolts until all completely assembled.
Keep all hardware parts out of reach of children

TABLE 3

MODEL NO: Eternity Single-Sided Workstation without Screen – 3 Person

$Ideal-FURNITURE-DST1875-Eternity-Single-Sided-Workstation-Desk-FIG-1 $4$$

IMPORTANT NOTE:

Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Don’t tighten all screws/bolts until all completely assembled.
Keep all hardware parts out of reach of children