BENSON 9508778831358 LED Ground Spot Solar Garden IP44 User Manual

BENSON 9508778831358 LED Ground Spot Solar Garden IP44

TECHNICAL INFO

OPERATION – INSTALLATION

1. Slide the switch on the bottom of the solar lamp to ON.
2. Slide the two ground pins together (see step 1).
3. Fix the ground pins in the 4 holes on the back of the solar lamp (see step 2).
4. Choose the right place in the garden, soft ground, where the solar panel can receive direct sunlight.
5. Insert the spike foot into the ground to fix the lamp.
6. The ground spot is automatically charged during the day and turns on automatically at dusk and off at dawn.

PAY ATTENTION:
If the product will not be used for a longer period of time, it is best to remove the ground spot from the ground, disassemble and store it. When the ground spot is used for the first time or if it is not used for a longer period of time, the solar panel must be sufficiently charged by sunlight (charging time 8-10 hours) before it will light up in the evening. The product should not be placed near fire sources.

STORAGE

Store the product, the manual, and accessories in the original packing. This way you always have the necessary information on hand. Store the tool in a dry environment.

DISPOSAL

Do not dispose of electric products in the household waste. According to the European standard 2012/19/EU for the disposal of electrical equipment (WEEE), it should be taken to your local waste collection station and offered for recycling. Do not dispose of batteries. According to the European Battery Directive 2006/66/EC, empty batteries should be taken to a recycling center or chemical waste collection point in your area.

J.C.J.C. IMPORTS, P.O. BOX 2007, 1801 EA ALKMAAR, THE NETHERLANDS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>