ELKO EKO50065 One Key Card Switch Instruction Manual
- June 1, 2024
- ELKO
Table of Contents
ELKO EKO50065 One Key Card Switch Instruction Manual
Necessary accessories
To be completed with:
- Frame in corresponding design and colour
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Safe electrical installation must be carried out only by skilled
professionals. Skilled professionals must prove profound knowledge in the
following areas:
- Connecting to installation networks.
- Connecting several electrical devices.
- Laying electric cables.
- Safety standards, local wiring rules and regulations.
Failure to follow these instructions will result in death or serious injury
ELKO One key card switches can be operated with a key card. The switch
can be used as a main switch, a signal sender or as both.
Usage areas: hotel rooms, ships cabins, hospitals, institutions, offices etc.
The switch has a built-in light source.
Note: If one connection is 230V, then all connections must be considered as live 230V connections.
Technical facts for:
Switch: AC 230V, 50Hz, 10A
Built-in light source: LED AC 230V, 0.3mA
Dispose of the device separately from household waste at an official collection point. Professional recycling protects people and the environment against potential negative effects.
ELKO AS
Sandstone 68, 0680 Oslo
Pb 6598 Letterhead, 0607 Oslo
Commercial registration number : 911 382 563 + 47 67 79 39 00
support@elko.no
www.elko.no
Assembly Instruction
Wiring Instruction
**2-pole. Switch light with or without card.
Front view
**
1-pole. Switch light with or without card. Separate reverse for Control
signal
Front view
1-pole. Switch light when card is extracted.
Front view
1-pole. Switch light when card is extracted. Separate reverse for
Control signal.
Front view