ELKO EKO07248 Smart IP Camera Indoor User Guide
- May 15, 2024
- ELKO
Table of Contents
ELKO EKO07248 Smart IP Camera Indoor
Specifications:
- IR-intervall: Not specified
- Panoreringsvinkel: Not specified
- Lutningsvinkel: Not specified
- Lokal lagring: Supported via micro-SD card
Product Information:
This product is an indoor Smart IP camera designed for home use.
It allows for remote monitoring and recording of video footage.
Contact Information:
For technical support or inquiries, contact ELKO AS at
Sandstuveien 68, 0680 Oslo, Norway. Phone: +47 67 79 39 00, Email:
support@elko.no, Website:
www.elko.no
FAQ:
Q: How can I reset the camera to its factory settings?
A: To reset the camera, locate the reset button on the device and hold it
down for 10 seconds until you hear a beep. The camera will then reboot to its
factory settings.
Smart IP Camera Indoor
Prerequisites
Download the ELKO Smart app to your smartphone/tablet.
About this product
With the Smart IP Camera Indoor (hereinafter referred to as IP Camera) you can
monitor sensitive areas of your home. The IP Camera can be triggered by other
ELKO Smart devices.
Package content
- A IP Camera
- B Power supply
- C Power supply cord
- D Mounting base
- E 3 screws with wall plugs
- F Marking template
- G Installation instructions
Installing
You can install the IP camera in all directions, e.g. at the ceiling or just
put it on a table.
Users are solely responsible for adhering to applicable privacy laws (e.g. the
GDPR, Article 5). Users must ensure that guarantees are taken to avoid any
misuse of equipment for surveillance or entirely different and unexpected
purposes than intended.
Inserting a micro-SD card
You can insert a micro-SD card for local storage.
NOTE: If the IP camera is already powered on, then turn off the IP camera
to insert the micro-SD card.
For playback settings, refer to the Device User Guide.
Reading the full Device User Guide online
Scan the QR code and choose your language for complete information about
the device, including operation, configuration and using the product with an
ELKO Smart system.
Technical data
- Nominal voltage: AC 100-240 V, 50/60 Hz
- Power supply: DC 5 V, 2 A
- Power consumption: max. 10 W
- Ambient temperature: -10° C to 45° C
- Operating humidity: <95% RH
- Operating Frequency: 2405 – 2480 MHz
- Max. radio-frequency power transmitted: < 100 mW
- Wi-Fi® standard: IEEE 802.11 b/g/n 2.4 GHz
- Wi-Fi® security: WPA-PSK / WPA2-PSK
- Channel bandwidth: Support 20/40 MHz
- Data security: AES128
- Resolution: 1080p
- Wide angle lens: 80° horizontally 40° vertically
- IR range: 7 m
- Pan angle: 0° to 340°
- Tilt angle: -75° to 75°
- Local storage support: Micro SD Card, max. 128 GB
Trademarks
- Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
- Apple® and App Store® are brand names or registered trademarks of Apple Inc.
- Google Play™ Store and Android™ are brand names or registered trademarks of Google Inc.
Other brands and registered trademarks are the property of the relevant owners.
EU Declaration of Conformity
Hereby, ELKO, declares that this product is in compliance with the essential
requirements and other relevant provisions of RADIO EQUIPMENT DIRECTIVE
2014/53/EU. Declaration of conformity can be downloaded on: ELKO.no.
ELKO AS
Sandstuveien 68, 0680 Oslo
Pb 6598 Etterstad , 0607 Oslo
+47 67 79 39 00
support@elko.no
www.elko.no
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>