Pet Hair Eraser® Lift-Off® Upright Pet Vacuum Cleaning Filters | Support
- June 7, 2024
- Bissell
Table of Contents
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
- If you are experiencing issues with reduced suction you’ll want to follow the complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenanc
-
Remove the Dirt Cup from the machine
-
Remove all Filters
-
Open the Tank Lid > Twist the Dirt Cup lid to the right
- Remove Pre-Motor Filter
- Filter can be rinsed > Allow to completely air dry (24 – 48 hours) before reinstalling
-
Remove the Post-Motor Filter
- Pull up on the Post-Motor Filter Door
- Unscrew the Post Motor Filter
- Tap the Filter over a waste bin to remove any dust and place back in your Vacuum
-
For replacement Filters > Go to Parts & Supplies
-
If you were having suction issues and the steps above did not resolve > Go to Lower Hose/Foot
-
Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>