ANKER 323 PowerPort II with 2 PIQ Wall Charger User Manual
- June 3, 2024
- Anker
Table of Contents
ANKER 323 PowerPort II with 2 PIQ Wall Chargers
Attention
Read all the instructions before using the product.
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
INSTALLATION
For FAQs and more information, please visit:
anker.com/support
Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong KongThe
following importer is the responsible party (contract for EU and UK matters)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich,
Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road,
Watford, Hertfordshire, WD17 1HP, United Kingdom
Specifications
Input | 100-240V~ 1A 50-60Hz |
---|---|
Output |
Use One Port
USB-C : 5V 3A/9V 3A/11V 3A/15V 2.2A/
20V 1.65A (33W Max)
USB-A : 4.5V 5A/5V 4.5A/5V 3A/9V 3A/
11V 3A/12V 2.5A /20V 1.5A (33W Max)
Use Two Ports
USB-C+USB-A : 20W + 12W (32W Max)
Total Output
33W Max
Average Active Efficiency
|
86.29%
Efficiency at Low Load (10%)
|
72.11%
No-Load Power Consumption
|
0.06W
---|---
Recommended Oper- ating Temperature
| 0-25℃ /32-77 ℉
Customer Service
- 18-month limited warranty*
- Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
- Lifetime technical support
support@anker.com
support.mea@anker.com (For Middle East and Africa
Only)
- (US/CA) +1 (800)988 7973
- (UK) +44 (0) 1604 936200
- (DE) +49 (0) 69 9579 7960
- (Middle East & Africa) +971 42428633
- (UAE) +971 8000320817
- (KSA) +966 8008500030
- (Kuwait) +965 22069086
- (Egypt) +20 8000000826
- (AU) +61 3 8331 4800
- (TR) +90 0850 460 14 14
- (RU) +8 (800) 511-86-23
- (India) +91 18003138831
- ( 中国 ) +86 400 0550 036
- ( 日本 ) 0344557823 ( 한국 ) +82 02-1670-7098
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operations.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733
This device complies with Industry Canada license-ICES-003.
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB003(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com. Hereby, Anker Innovations Limited declares that this product is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>