coccolle 3in1 Ago Convertible Travel System Instruction Manual

coccolle 3in1 Ago Convertible Travel System Instruction Manual

the images shown in this instructions manual have illustrative purpose. The product purchased by you may look different.

Convertible travel system Coccolle Ago

Read these instructions carefully before use and keep them for future reference. Your child’s safety may be affected if you do not follow these instructions.

Safety warnings

1. Never leave the child unattended.
2. Ensure that all locking devices are engaged before use.
3. To avoid injury, make sure that your child is kept away when unfolding and folding this product.
4. Do not let the child play with this product.
5. Always use restraint system.
6. Check the pram body or seat unit or car seat attachment devices are correctly engaged before use.
7. This product is not suitable for running or skating.
8. This product can be used for child from birth to 4 years old or up to 22 kg whichever comes first.
9. This stroller shall be used only for one child, as it has been designed.
10. Parking devices shall be engaged when placing and taking out the child.
11. Use the brake when the stroller is stopped.
12. Any goods placed in the basket must not exceed 2 kg.
13. Any load attached to the handle and/or on the back of the backrest and/or on the sides of the stroller will affect the stability of the stroller.
14. Any accessories which are not approved by manufacturer shall not be used.
15. Only replacement parts supplied or recommended by the manufacturer shall be used.
16. Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use.
17. Use the safety belt as soon as your child can sit unaided.
18. This stroller is compatible between seat unit and pram body. The seat mode is not suitable under 6 months.
19. No additional mattress can be added unless it is provided by the manufacturer.
20. This carrycot is suitable for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees.
21. Maximum weight for the child to use carrycot mode is 9 kg. Overall maximum weight: 22 kg. The car seat has been manufactured according to size standard and can be used to around 60 cm height.
22. For new born babies, the most reclined position shall be in use.
23. Compliant with: EN1888-2+A1:2022

Warranty conditions

1. The warranty does not cover:
   · Damage occurred for reasons attributable to the user.
   · Damage occurred as a result of failure to use the product according to recommendations, warnings and restrictions found in the user manual and on product elements.
   · Consumables subject to natural wear and tear during normal usage such as: tyres, inner tubes, tread, materials used on handles, structure and colour of fabrics and materials subject to friction, sleeves in wheels, axels, prints.
   · Damage occurred as a result of failure to observe maintenance guidelines such as: corrosion, changed upholstery or plastic elements colour as a result of prolonged exposure to sunlight, damage to plastic elements of upholstery as a result of prolonged exposure to sunlight or excessive temperatures, excessive play, squeaking / creaking noises, damage to mechanism due to over- load.
   · Damage occurred due to repairs being carried out by unauthorised personnel.
   · Single wheels being pushed into a vertical position as a result of loading (this is normal).
   · Damage and soiling occurred due to the product being incorrectly packaged for shipping (courier online purchases).

2. The repair method is determined by the manufacturer/warranty service provider.

3. The product subject to a complaint should be provided clean.

4. The consumer goods warranty does not exclude or suspend the purchaser’s rights stemming from goods noncompliance with the agreement.

Spare parts list

1. Canopy
2. Canopy extension zipper
3. Seat adjusting angle button
4. Stroller handle
5. Folding button
6. Seat fold button
7. Seat removal button
8. Folding lock
9. Break
10. Suspension
11. Rear wheel
12. Shopping basket
13. Wheel removal button
14. Direction lock button
15. Front wheel
16. 5 points harness
17. . Bumper bar
18. Sunshade

Safety belt use

• A. Hook up the left shoulder belt with the left waist belt.
• B. Hook up the right shoulder belt with the right waist belt.
• C. Insert the hooked left part into the middle part of the buckle.
• D. Insert the hooked right part into the middle part of the buckle.
• E. Adjust the shoulder belt and waist belt to comfortable position, then the safety belt is well buckled.
• F. Press the button on the middle part of the safety buckle to release it.
• G. Set up the length of the belts according to the height of baby.

Product assembly

• 1. Match the front wheel bearing with the wheel housing on the front tube and insert it into the proper opening until you hear a “click” sound.
• 2. Press the metal clip on the wheel stand and pull it out to detach wheels.
• 3. Press down the direction lock to lock the wheels for straight strolling.
• 4. Match the rear wheel bearing with rear wheel housing and insert it until you hear a “click” sound.
• 5. Press the button on the brake and meanwhile pull the rear wheel out to detach it.
• 6. Step on the back part of the brake lever and press down to set the brake. Step on the front part of the brake lever and press down to release it.
• 7-8. With one hand hold the strap and the other hand pinch the slider upward to set the seat recline to upright position. Pinch the slider and slide it down to lower position of seat recline.
• 9-11. Buckle up the first buckle under the front part of the seat, then fasten the second buckle under the front part of the seat to set the foot rest part when you use the seat mode.
• 12-13. Unzip the zipper on the canopy to get more ventilation. Zip it up to avoid direct sunlight.
• 14-15. Open the canopy for a wider view and close it to avoid sunlight and wind.
• 16. Match the front bumper with both slots on the seat and insert it until you hear a “click” sound.
• 17. Press the buttons on the bumper and meanwhile pull it out to detach it.
• 18-19. The bumper has a pivoting function, it can be opened just on one side for easier placement of the child inside or out of the stroller.
• 20-24. Press the round buttons on both sides of the seat and lift the multifunctional seat unit, reverse it and match again with the slots on the frame and insert it to change the direction of multifunctional seat unit.
• 25-31. Pull on the handle as picture 25 shows it and hold it, at the same time move the seat upward or downward to change the seat angles you want. When the seat unit is setup with forward facing direction, there are available 3 adjustment angles and when the seat unit is with in parent facing direction, there are also 3 angles of adjustment.
• 32-34. Buckle up the buckles under the carrycot, pull up the angle adjuster and adjust it to the most upright position and set up the seat recline.
• 35-37. Press both buttons on the seat and meanwhile take it out and reverse it, match it with the slots again and insert it until you hear a sound “click”. Then the carrycot is converted into seat mode.
• 38-39. Open the seat angle adjuster and adjust it to level position you want.
• 40-42. Release the buckle under the seat recline and open the buckles under the front part of the seat. Then finish converting seat into carrycot mode. Put in the provided mattress when you use the carrycot.
• 43-45. Press the big round buttons on both sides of the seat and reverse the direction, match it with the slots on the frame again and insert it until you hear a sound “click”.
• 46-47. Buckle up the buckles under the front part of the seat and adjust the carrycot to the most upright position, then set up the recline to convert it into seat mode.
• 48-50. When folding, first change the seat unit to forward direction and close the canopy. Grip the one hand fold system, slide the button to right side and hold it, then turn it down as the arrow shown on picture 48 and lay it down until it is folded.
• 50-53. Press the small round buttons on both sides of the seat and fold it as picture 52 shows, fasten the frame lock to finish stroller folding.
• 54. Remove the multifunctional seat from the frame. Insert the adapters until you hear the click sound.
• 55. Put the car seat unto the adapters.
• 56. Make sure that the car seat is well fixed on the adapters.
• 57. Press the two buttons on the adapters at the same time and remove the car seat together with the adaptors from the stroller frame.
• 58. When the stroller is being used with the car seat on, the only available position is rear facing. Do not try to attempt to face the car seat in forward facing position.

Care & Maintenance

For the safety of your child please read and follow the tips for maintenance and keep it for future reference. Never leave your child unattended. Always keep the child in view when it is in stroller.
-Check and maintain the stroller periodically to avoid risk to your baby.
-When fold or unfold doesn’t run smoothly, check and operate it as the instructions specified to avoid unwanted damage.
-When installing or before using, you should make sure that all the parts are integrated.
-Clean the woven fabric with brush other than washing.
-Do not store this stroller or use it in area which is humid or expose it to high or low temperatures.
-Do not overload the stroller.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>