coccolle Lissia Anthracite 3in1 Travel System Instruction Manual

: June 12, 2024
: coccolle

Table of Contents

coccolle Lissia Anthracite 3in1 Travel System
Product Information
Product Usage Instructions
What’s In the Box
CAR SEAT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

coccolle Lissia Anthracite 3in1 Travel System

Product Information

This product is a 3in1 travel system that includes a stroller, carrycot, and car seat. It is designed for use with infants and provides convenience and versatility for parents on the go. The product may vary in appearance from the images shown in the user manual.

The travel system is equipped with a rain cover to protect your child from the elements. However, it is important to exercise caution when using the rain cover to prevent the risk of suffocation. The rain cover should only be used when the stroller is fitted with the hood or sun canopy. It is recommended to remove the rain cover when indoors or in warm environments to prevent overheating.

The carrycot is an attachment that provides a comfortable and safe space for your baby to lie down during walks. The infant car seat can be securely attached to the stroller frame, allowing for easy transportation of your baby in and out of the car.

Product Usage Instructions

Opening the Sun Canopy:
The sun canopy adjusts simultaneously with the carry handle. If you want to disengage this function, untie the canopy from the carry handle.

Using the Carrycot:

Insert the mattress into the carrycot.
Attach the footmuff and sunshade to the carrycot.

Using the Car Seat:

Ensure that the front-facing seat in your vehicle is fitted with a three-point safety belt and is approved under ECE R16.
Place the car seat onto the adapters on the stroller frame.
Make sure to attach part R on the right side and part L on the left side.
To remove the car seat from the stroller frame, press the two buttons on both sides of the car seat and lift it off.

Safety in the Vehicle:

Ensure that the safety belt lock does not touch the lower guide of the lap belt. If the safety belt is too long, it may not be suitable for the position. Refer to your vehicle’s manual for verification.
Even when not in use, always secure the car seat with the vehicle’s safety belt. In the event of a sudden stop or collision, the car seat can pose a risk to other passengers in the car.

Please refer to the user manual for additional information and instructions on maintenance and warranty.

What’s In the Box

3in1 Travel system Coccolle Lissia
IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Your child’s safety may be aﬀected if you do not follow these instructions.
Use only spare parts delivered by importer for replacing or repair.
Damages caused by overloading or wrong folding are not granted.
Prolonged exposure to sunshine may cause changes in the colour of materials and fabrics.
Do not expose this product to extreme temperatures. Extreme sunshine or temperatures may cause colour changes or bent parts.

Safety warnings

Never leave the child unattended.
The use of this stroller is recommended for children from 0 months till 3 years. The most reclined position is designed for new born babies.
Conﬁguration with stroller seat is from 0 months to 22 kg.
Conﬁguration with carrycot is from birth to 9 kg.
Conﬁguration with optional car seat is from birth to 13 kg.
This vehicle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable pram body, cot or bed.
Do not overload the basket with more than 2 kg.
Any load attached to the handle and/or on the back of the backrest and/or on the sides of the stroller aﬀects the stability of the stroller. The stroller may become unstable and tip over and can injure you child.
This product is not suitable for running or skating.
The product must be assembled by an adult.
Always use the restraint system.
Pay special attention when maneuvering the stroller up or down the pavement, it is best to do it backwards.
Be aware of the risk of open ﬁre and other sources of strong heat, such as electric bar ﬁres, gas ﬁres, etc. in the near vicinity of the stroller.
Do not use this stroller if any parts are broken, torn or missing.
Ensure that all the locking devices are engaged before use.
Do not allow child to stand on seat or footrest.
Before making adjustments to stroller ensure that child’s body is clear of any moving parts.
To avoid injury, ensure that your child is kept away when unfolding and folding this product
Do not use on stairs, steep slopes, steps, escalators or muddy/ rough terrain, fold stroller and carry.
Do not overload as stroller may become un stable.
Do not lift and carry the stroller while open with a child in it.
This vehicle has been designed for maximum of 1 child per seat, per carry cot or per car seat.
Do not use this stroller if any screws, nuts, bolts, etc. are missing or any component is damaged or missing.
Put on all the brakes whenever you park the stroller.
Do not let your child play with this product.
The parking device shall be engaged during the loading and unloading of children.
Do not allow objects on top of canopy as this stroller may become unstable.
Keep plastic rain cover away from children to avoid suﬀocation. Do not use the rain cover if the stroller is not ﬁtted with the hood or sun canopy to prevent the risk of suﬀocation. To prevent the risk of suﬀocation, never leave the stroller with child in it under the sun, with the rain cover ﬁtted to it.
Do not use accessories which are not approved by the manufacturer.
Only replacement parts supplied or recommended by the
manufacturer/distributor shall be used.
To avoid injury, ensure that your child is kept away when unfolding and folding this product.
Please make sure that the carrycot, seat and car seat is well ﬁxed on the frame before you put the child inside.
Keep this product away from children when it’s not used.

Warranty conditions

The warranty does not cover:
- Damage occurred for reasons attributable to the user.
- Damage occurred as a result of failure to use the product according to recommendations, warnings and restrictions found in the user manual and on product elements.
- Consumables subject to natural wear and tear during normal usage such as: tires, inner tubes, tread, materials used on handles, structure and color of fabrics and materials subject to friction, sleeves in wheels, axels, prints.
- Damage occurred as a result of failure to observe maintenance guidelines such as: corrosion, changed upholstery or plastic elements color as a result of prolonged exposure to sunlight, damage to plastic elements of upholstery as a result of prolonged exposure to sunlight or excessive temperatures, excessive play, squeaking / creaking noises, damage to mechanism due to over-load.
- Damage occurred due to repairs being carried out by unauthorized personnel.
- Single wheels being pushed into a vertical position as a result of loading (this is normal).
- Damage and soiling occurred due to the product being incorrectly packaged for shipping (courier online purchases).
The repair method is determined by the manufacturer/warranty service provider.
The product subject to a complaint should be provided clean.
The consumer goods warranty does not exclude or suspend the purchaser’s rights stemming from goods noncompliance with the agreement.

Assembly
Check if following spare parts are in the box:

Chassis
Rear wheels
Seat including upholstery and canopy
Front bumper
Rain cover
Adapter set for MC car seat

If one or more of the above-mentioned spare parts are missing or broken, please contact the store where you bought the product, before using. WARNING! Please keep all packaging material away from babies and children, to prevent suﬀocation.

Unfold the stroller
Open the package and take out the parts. Lift up the handle bar and ﬂing open the stroller as pict. 1 and 2. When you hear a CLICK the frame is unfolded completely and verify frame is fully locked in place.
Assembly/ disassembly front wheel
Pict. 4: Plug the wheel bearing into the wheel housing until you hear a click, it indi-cates that the wheel is installed in place. Please try to move and rotate all the wheels by your hand to make sure all the wheels are ﬁrmly ﬁxed on wheel houses before use.
Pict. 5: The front wheel can swivel all the way.
Push the small lock up (oﬀ) and down (on) to swivel or not.
Pict. 6: The wheels can be removed quickly by pressing the arrow button shown on picture 6 and pulling out the wheel at the same time.
Assembly/ disassembly rear wheel
Pict. 7: Plug the wheel bearing into the wheel housing until you hear a click, it indi-cates that the wheel is installed in place. Please try to move and rotate all the wheels by your hand to make sure all the wheels are ﬁrmly ﬁxed on wheel houses before use.
Pict. 8: The wheels can be removed quickly by pressing the arrow button shown on picture 8 and pulling out the wheel at the same time.
Open the seat
Pict. 9: Open the seat along the direction of the arrow until you hear “CLICK” and verify that the seat is fully locked in place as picture 10.
Pict. 10: Open the front armrest along the direction of the arrow until you hear a click and verify that the armrest is fully locked in place as picture
Install/ remove seat (forward & reverse)
Pict. 12: Forward installing seat: clamp the seat to the frame in the direction indicated by the arrow and verify that seat is fully complete locked in place, see pict. 13. Pict. 14: Reverse install seat: clamp the seat to the frame in the direction indicated by the arrow and verify that seat is fully locked in place. Pict. 15: Press the seat lock button and pull the seat up with hand, remove the seat completely.
Install/remove/open the bumper bar
Picture 16: Insert into the both side plastic hole of the front armrest holder until you hear “CLICK” and verify that armrest is fully completely locked in place.
Picture 17: Press front armrest lock buttons and pull out the armrest outward with hand, remove the armrest completely. Picture 18: Press front armrest lock button and pull out one side of the armrest out-ward with hand, and then open the front armrest.
WARNING: Always secure your child with the seat belt. The front bumper is not a restraint device. DO NOT lift the stroller by the bumper. Use care when attaching the bumper on the stroller with a child in the stroller.
Adjusting the handle
Picture 19: The height of the handle can be adjusted by pinching the handle inward (as picture 20).
Adjusting backrest
Pict. 21/22: Pull the adjusting button on the backrest, you can lift upward or down-ward to adjust the backrest position. The backrest can be adjusted in 3 positions.
Canopy adjustment
Pict. 23: The canopy can be adjusted along with the arrow direction.
Adjusting legrest
Picture 24: Press the button on both sides to adjust the height of the leg rest.
Using 5-point safetybelt
WARNING: ALWAYS USE THE CROTCH STRAP WITH SAFETY BELTS. Slide the shoulder belt on to the upper sides of the hip safety belts. Then lock buckle parts of hip belts together into the cross belt (belt between the legs) until secure click is heard. Adjust shoulder, hip and crotch belt with adjustment buckles in right length to ﬁt your child. To release belt just press the socket button.
Brake function
Pict. 26: To engage the brake, push down the brake bar (lock). To release, lift the brake bar (unlock).
WARNING: The parking device shall be engaged when placing and removing the child.
Seat forward folding operation
Pict.27: Pull the backrest adjusting handle to turn the back of the seat forward (see picture 28).
Pict. 29: After adjusting the height of the handle bar to the lowest position, press the second lock on the right hand and pull up the handlebars both side of the handle until the handlebar is folded downwards as picture 30.
Picture 31: Pull up the hand is completion of the forward folding stroller (pict. 32,33).
Seat reverse folding operation
The folding operation is same as seat forward folding operation. After folding it is as picture 34.
Seat forward/ seat reverse opening the frame
First refer to STEP 1 to open the frame and pull the handlebars up until you hear “CLICK”, then open the seat and verify that seat and frame are locked in place by following STEP 4.
Seat opens in reverse, same as seat opens forward.
Rain cover assembly
Put rain cover on the stroller and make sure it has been ﬁxed by Velcro.

WARNING: Be extremely careful when using the rain cover. Store away from children when not in use. To be used under adult’s supervision. Do not use the rain cover if the stroller is not ﬁtted with the hood or sun canopy to prevent the risk of suﬀocation.
To prevent the risk of suﬀocation, never leave the stroller with child in it under the sun, with the rain cover ﬁtted to it. To prevent your child from overheating, always remove the rain cover when indoor or in warm environments.

CARE AND MAINTENANCE
To prolong the life of your nursery product, keep it clean and do not leave in the direct sunlight for extended periods of time. Check the wheels regularly for wear and make sure that there is no dust and sand between the axles and wheels. Removable fabric covers and trims may be cleaned using warm water with a household soap or a mild detergent. Allow it to dry fully in the air, preferably away from direct sunlight.
Do not allow the stroller to come in contact with salt water, this causes the formation of rust.
Check your stroller regularly. If any parts like bolts, screws, fabric pieces or stitching, are found to be loose, broken or damaged, always repair or replace them. Where damage or dysfunction occurs, stop using the stroller and contact your dealer.
Before starting operation, please applies some lubricant silicone free oil Vaseline onto the hinges and joints to ensure smooth function.

CARRYCOT
Safety warnings

Do not use additional mattress.
The use of this carry cot is recommended for children from 0-6 months.
This product is suitable for a child who cannot sit up unaided, roll over and cannot push itself up on its hands and knees. Maximum weight of the child is 9 kg.
This carrycot is not designed to transport the child when NOT attached to the Travel system chassis.
This carry cot does not replace a cot or bed.
Do not use if any part is broken, torn or missing.
Use only on a ﬁrm ground which is horizontal level and dry.
Be aware of the risk of open ﬁre and other source of strong heat, such as electric bar ﬁres, gas ﬁres, etc. in the near vicinity of a child.
Do not place the carry cot near an open ﬁre or other source of strong heat.
Do not allow more than 1 child in the carry cot.
The head of the child in the carry cot should never be lower than the body of the child.
Before carrying or lifting the carry cot make sure that the handle is in upright (vertical) position.
Handle and the bottom should be inspected regularly for signs of damage and wear.

Assembly/Usage
Check if following spare parts are in the box:

A. Carry cot body with canopy including mattress
B. Top cover
C. Sun shield
D. Inner liner

If one or more of the above-mentioned spare parts are missing or broken, please contact the store where you bought the product, before using.
Open the package and take out the parts. Pull frame wires out until it clips into the holder on both sides.
Press the buttons as shown in the picture to adjust the canopy in direction up or low.
Put the liner into the carry cot and then zip it. Pull up the zipper of the sun shield and canopy.
Fasten the elastic cord and button of top cover on to the handle.

FITTING CARRY COT ON TO THE CHASSIS (FORWARD AND REVERSE) Clamp the carry cot to the frame in the direction of the arrow and verify that carry cot is fully locked in place.

REMOVE CARRY COT FROM THE CHASSIS
Press the lock buttons on both sides and pull up the carry cot.

Adapters
Assembly/ usage

WARNING: Before you insert the adapter key to the connector, please make sure you will follow the instruction.

Step 1: Insert the car seat adapter key to the car seat connector.
Note: put R part on right side and L part on left side.
Step 2: Insert the car seat into the stroller adapter key.
WARNING: Please always make car seat face to handle bar when attaching it to chassis.

Disassembly

Step 1: Press the buttons on car seat to release the car seat.
Step 2: Press the adaptor button and lift the adaptor out of the frame.

CAR SEAT

Usage in the vehicle
If the infant car seat is placed on the vehicle seat in a way that is not stable or at too steep an angle, it can be adjusted with an additional blanket.
WARNING! Do not use the infant car seat on a seat on which a front airbag is activated. The large-volume front airbag expands explosively and may cause your child serious injury or even death.
The infant car seat only oﬀers the best possible protection when exactly following the instructions given in this manual. No modiﬁcations or additions may be made to the infant car seat without the approval of manufacturer. Repairs may only be undertaken by persons who have been authorized to do so. In doing so, they must always use original components and accessory parts only.

WARNING! NEVER hold a baby on your lap in a car. The forces released in a collision are way too high for any person to hold on to the baby. Never secure yourself and the child with only one seatbelt. The device should be replaced when it has been subject to violent stresses in an accident.
The infant car seat should be kept away from sunlight, otherwise it may be too hot for the child’s skin. Any luggage or other objects liable to cause injuries in the event of a collision shall be properly secured.

Adjusting the carrying handle
WARNING! Always strap your child in with the integrated belt system.
You can lock the carrying handle in place in four positions:

A: vehicle position
B: carrying position
C: for putting your baby inside
D: for setting the infant car seat down safely on a level surface outside the vehicle.

To adjust the carrying handle, simultaneously press the left and right buttons (b). Then pivot carrying handle a forward or backwards while pressing button (b, until it automatically locks in place in the desired position.

Adjusting the headrest
The headrest only ensures the best possible protection for your child if it is adjusted to the optimum height. There are six positions that can be set.
The shoulder belts (e) are ﬁrmly connected to the headrest and must not be adjusted separately.

Strapping with the belt system

Ensure that the headrest is correctly locked in place before using the seat.
Ensure that the infant car seat is free from toys and hard objects.
Loosen shoulder belts (e) by pressing the adjustment button on central adjuster (d) and simultaneously pulling both shoulder belts up.
Undo the belt buckle by pressing red button (h) ﬁrmly. Always pull-on shoulder belt (e) and not on belt pads (f).
Place shoulder belt (e) directly over your child’s shoulders. Ensure that shoulder belts (e) are not twisted.
Place both buckle tongues together and lock them in place in belt buckle (i) with an audible “CLICK”.
For the infant car seat to oﬀer optimum protection, shoulder belts (e) should ﬁt the body as closely as possible.

Note! Always strap your baby into the infant car seat and never lose sight of your baby if you put him or her down on a raised surface (e.g., changing unit, table, bench, armchair…) while in the baby infant car seat.
Take your baby out of the infant car seat as often as possible in order to relieve pressure from his or her spine. Take breaks on longer car journeys for this purpose. Also ensure that you do not leave your child for too long in the infant car seat even when not in the car.
Please never leave your child unattended in a vehicle.

Safety when installing in vehicle
The vehicle belt buckle (k) must under no circumstances reach into the lower lap belt guide (m). If the belt stalk is too long, the infant car seat is not suitable for use in this position in the vehicle. In case of doubt, please contact the manufacturer of your vehicle.
The infant car seat must always be secured with the vehicle seatbelt, even when not being used. In the event of an emergency stop or a minor collision, an unsecured infant car seat can injure other passengers and yourself.

Installation in car
Place the infant car seat facing the rear of the vehicle on the vehicle seat (the child’s feet point towards to the backrest of the vehicle seat).
This infant car seat can be used on all seats with three-point automatic belts. We recommend as a rule that the seat is used in the rear of the vehicle. In most cases, your child is exposed to higher risk in the front.
Pull out the vehicle seatbelt and route it over the infant car seat.
Lock the buckle tongue in place in vehicle seatbelt (k).
Place the lap belt (l) into belt guides (m) on both sides of the infant car seat. The support pad in the seat is used only when the baby below 6 months old. Tighten lap belt (l) by pulling on diagonal belt (n) in the direction of the front of the vehicle. Pull diagonal belt (n) behind the head end of the infant car seat. Note! Do not twist the vehicle seatbelt while doing this.
Route diagonal belt (n) through the rear belt guide (o). Tighten diagonal belt (n). Note! Diagonal belt (n) must be routed through rear, belt guide(o). Now swing the carrying handle (a) with both buttons (b) pressed, into the vehicle position A .
WARNING! It may be that buckle part (k) of the car seatbelt is too long so that is reaches the belt guides of the infant car seat. This means that the infant car seat cannot be fastened tightly. If this is the case, choose another seat in the car for the infant car seat.

Removal from the vehicle
Take the diagonal belt out of rear, belt guide (o). Undo the car seatbelt buckle and take lap belt (l) out of belt guide (m).

Correct securing of your baby
To ensure your baby’s safety, check that:

shoulder belt (e) ﬁts the baby’s body closely without constricting the baby and the belt is not twisted.
the position of the headrest is correctly adjusted.
buckle tongues (i) are locked in place in belt buckle (e).

Correct installation of the car seat

the car seat is secured with the child facing the rear of the car (the child’s feet point towards the backrest of the infant car seat).
the car seat is only used on the front passenger seat if there is no front airbag that can impact on the infant car seat.
the car seat is fastened with a three-point automatic infant car seat belt.
lap belt (l) runs through the two belt guides (m) on both sides of the car seat.
diagonal belt (n) runs through belt guide (o) on the backrest of the car seat.
car seatbelt buckle (k) is not touching belt guide (m).
the car seatbelt is taut and not twisted.
Swing the carrying handle into the vehicle position A.

Note! The infant car seat may only be used on a front facing seat that has been ﬁtted with a three-point safety belt and is approved under ECE R16.

Opening the sun canopy
The canopy adjusts at the same time as the carry handle gets adjusted. In case you want to disengage this function, please untie the canopy from the carry handle.

Care and maintenance
All important parts of the infant car seat should be checked regularly for damage so that all mechanical components function without problems.
It is absolutely essential to ensure that the infant car seat is not jammed between hard objects such as vehicle doors, seat rails etc., because this can lead to damage.
After exposure to massive forces (e.g., after an accident), it is essential that the infant car seat is checked by the manufacturer. An accident can cause damage to the infant car seat that is not visible to the naked eye.
You can clean the cover and the belts with a clean cloth and some water. Try to avoid getting the cover and belts too wet.

WARNING! Never remove individual parts of the belt system!
Never use harsh cleaning or bleaching agents!