suddenlink Gateway 5 Modem and Router Instructions
- June 5, 2024
- suddenlink
Table of Contents
Gateway 5
These instructions will guide you through installing or replacing a Gateway 5.
|
---|---
Disconnect everything from your existing equipment.| Connect the open end of
your coaxial cable to the back of the new Gateway.
|
Plug the Gateway power cord into the back of the device.| Plug the other end
of the power cord into an electrical outlet.
|
---|---
The Gateway is ready for the next step when the top 3 lights (POWER, DS/US,
ONLINE) on the front panel are solid green. This may take a few minutes.
Once you’ve connected and powered on your new Gateway, call 888.570.4702 to begin the activation process.
| Sign in at suddenlink.net/router to
personalize your in-home WiFi network name, also called a SSID, and your
password. Can’t remember or don’t have a Suddenlink username? Visit
suddenlink.net/myaccount If you’d rather
use the defaults, look at the label on the bottom of the Gateway. Note, your
password will be listed as the “Wi-Fi Pre-Shared Key”.
|
To connect to the Internet, go to WiFi settings on your device. Select your
in-home WiFi network name from the list and when prompted, enter your
password. Repeat this step for all of your connected devices.| If you have an
Altice One Mini, you need to re-pair it to the Gateway. Refer to the
“Replacing an Altice One Mini” instructions at
help.suddenlink.com/guides. If not,
you’re all set!
9. Make sure to return your old equipment. Learn how at suddenlink.com/returns
Suddenlink is a registered trademark of Suddenlink Communications, a
subsidiary of Altice USA, Inc. © 2020 Suddenlink Communications.
1120SDLGATE5
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>