zintronic How To Configure Push Alarms On Bitvision App User Guide
- June 9, 2024
- Zintronic
Table of Contents
How to configure push alarms on Bitvision app
This manual refers to Zintronic® ‘B’ & ‘D’ product series.
Configuration of push messages in Bitvision.
Turning on push messages.
-
Go to Bitvision main menu, then click three lines in the top right corner.
-
Press ‘Device Configuration’.
-
Choose your camera.
-
Check the slider next to ‘Push Image’.
Setting alarm area and alarm period.
-
Go to ‘Normal Alarm’.
-
Check the slider next to ‘Motion detection’.
-
Set the parameters according to your own liking (‘Sensitivity’ and ‘Detection Period’).
-
Go to ‘Detection Area’.
-
Set the area manually like it is shown on photo below.
-
Press ‘Save’ in the top right corner after you finished setting it up.
ul. J. K Branickiego 31A, 15-085 Bialystok
+48 (85) 677 70 55
biuro@zintronic.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>