coccolle Saliara Combined Stroller User Manual

coccolle Saliara Combined Stroller

Spare parts list

Coccolle Saliara multifunctional 2in1 travel system with separate carrycot and seat unit

Important general warnings

• Please read carefully these instructions before using the product and store them well for future reference. This product has been manufactured according to the EN 1888:2018 safety standard and it’s suitable for children age 4 or 22 kg (whichever comes sooner). This product is designed to transport a single child at once.
• In case you are using the product for a newborn, we recommend using either the carrycot or the most reclined backrest (lie-flat position) position of the seat unit.
• Overloading the baby stroller, incorrect folding, or using unauthorized accessories that do not belong to the product can break or deteriorate it.
• Keep the child away at a safe distance when adjusting or folding/unfolding the product.
• Always use the brake whenever you’re putting in or removing the child from the baby stroller.
• Never let your child play with the stroller and never let him stand in the stroller.

Safety warnings

1. Always use the restraining system.
2. Never leave the child unattended in the baby stroller!
3. All locking devices and safety systems should be checked before usage in order to make sure they are functional and running well.
4. To avoid any kind of injury, please keep your child away from the product during the folding and unfolding processes.
5. It’s forbidden to let your child play with the baby stroller.
6. Always check the parts of the stroller, making sure that the carrycot, the seat unit and/or the car seat can be properly installed on the frame.
7. This product is not suitable for running or ice skating.
8. The maximum load of the shopping basket is 2.5 kg.
9. Any weight hanging from the handlebar of stroller, its rear or lateral side may affect the stability of the product.
   It is forbidden to use accessories that have not been approved by the manufacturer.

Warranty conditions

1. The warranty does not cover:
   Damage occurred for reasons attributable to the user.
   Damage occurred as a result of failure to use the product according to recommendations, warnings and restrictions found in the user manual and on product elements.
   Consumables subject to natural wear and tear during normal usage such as tires, inner tubes, tread, materials used on handles, structure and colour of fabrics and materials subject to friction, sleeves in wheels, axels, and prints. Damage occurred as a result of failure to observe maintenance guidelines such as: corrosion, changed upholstery or plastic elements color as a result of prolonged exposure to sunlight, damage to plastic elements of upholstery as a result of prolonged exposure to sunlight or excessive temperatures, excessive play, squeaking / creaking noises, damage to mechanism due to overload. Damage occurred due to repairs being carried out by unauthorized personnel. Single wheels are being pushed into a vertical position as a result of loading (this is normal).
   Damage and soiling occurred due to the product being incorrectly packaged for shipping (courier online purchases).

2. The repair method is determined by the manufacturer/warranty service provider.

3. The product subject to a complaint should be provided clean.

4. The consumer goods warranty does not exclude or suspend the purchaser’s rights stemming from goods’ noncompliance with the agreement.

Unfolding and assembly (I.1-5)

• wheel assembly: remove the frame from the packaging (see pic. 1), insert the rear wheels in the space meant for them until you hear the click sound (see pic. 2), then continue by inserting the front wheels in the space meant for them until you hear the click sound, minding the fact that that the Left and Right direction must be corresponding (see pict.3).
• fix the seat: insert the two sockets in the lateral side of the frame, then push gently in order to make sure they lock in (see pict.4).
• unfolding the frame: press buttons 1 and 2 at the same time (see pic. 5), then pull the push bar upwards, and after the blocking device isn’t engaged anymore just pull out the push bar until you hear the click sound. The frame is not unfolded. Then lift the backrest until you hear the click sound. (see pic. 6). Open the seat unit’s canopy (see pict.7).

User instructions

Seat unit user instructions:

• to remove the seat unit from the frame, press at the same time both buttons on the lateral side of the frame and lift it up (see pict. II.1). In order to install the seat unit on the frame of the stroller, insert the seat’s adapters into the proper hole on the frame and press in gently until you hear the click sound (see
  pict.II.2).

• the seat unit can be installed in both directions: facing the parent or facing the world (see pict. II.3).

• adjusting the backrest angle: pull the button on the backrest’s rear side (see pict.II.4) in order to bring it to one of the 3 positions. The backrest is well fixed when you hear the click sound.

• in order to adjust the legrest, push the buttons on the lateral and lower the footrest (see pict. II.5,6). Push the buttons again and lift the legrest if you want to bring it back to it’s initial upper position.

• the bumper bar use: insert both ends of the bumper bar in the proper place on the frame until you hear the click sound (see pict. II.7). In order to remove the bumper, press both buttons and pull out (see pict. II.8).

• canopy use: please push gently the canopy backwards until you hear the click sound which means that the canopy has been folded (see pict. II.9). Pull the canopy towards the front of the stroller until you hear the click sound in which case the canopy has been completely unfolded (see pict. II.10).

• using the brakes: press down the break and once you hear the click sound the braking system has been engaged (see pict. II. 11). According to image II.10, lift the brake and once you hear the click sound the stroller’s brake has been released and the stroller can be pushed (see pict. II.12).

• removing the rear wheels: press the rear wheels button and remove the wheel (see pict. II.13).

• removing the front wheels: press the button above the front wheel and pull down the wheel in order to remove it (see pict.II. 14).

• the direction of the front wheels: turn the button to pedal direction to lock the direction of the front wheel; rotate the button in the opposite direction in order to allow the front wheels to pivot (see pict. II. 15).

• using the safety harness: press the central button in order to unlock the harnesses(see pict. II. 16). To engage the harness system, insert the side belts into the central button until you hear the click sound (see pict. II. 17). Adjust the length of the safety harnesses as you can see in image II.18.
  IMPORTANT! Always use and engage correctly the safety harness system.

Folding method
The frame can be folded with the seat unit on, in both directions.

• folding the stroller with the seat unit forward facing: lift the legrest to the upward position, press down the backrest adjustment button in order to fold the backrest front (see pic. II. 19- 21). Press down both buttons on the pushbar
  (see pic. II.22) and fold the frame down until the locking device engages (see pic. II.23).

• folding the stroller with the seat rear facing: push the button on the backrest and fold it (see pic. II.24,25). Then press down both buttons on the pushbar (see pic. II. 26) and fold the frame until the locking device engages (see pic. II.27).

Assembly and use of the carrycot

Unzip the zipper on the inside cover of the carrycot. You will uncover the carrycot support rods that need to be firmly opened in order to give the carrycot a solid base. Then close the zipper on the carrycot lining, put the mattress back in and start using the carrycot.
Press the buttons on the side of the carrycot’s canopy in order to open or close it.
You can install the carrycot on the frame with the help of the adapters. Put on the adapters on the carrycot and then insert the adapters on the frame, making sure the locking devices are engaged. Once you hear the click sound, the installation of the carrycot on the frame in well done. When you want to remove the carrycot from the frame, push the two lateral buttons at the same time, then lift the carrycot. In order to remove the adapters from the frame, push the button on them and lift the adapter from the frame.

Attention!

1. This carrycot has been designed for children that cannot sit up yet.
2. For proper functioning, we recommend using teh product only on smooth, dry, and horizontal surfaces.
3. In the carrycot, the head of the baby should up at a slightly upper level than the body.
4. Make sure the carrycot handle is in the correct position when carrying the product.
5. The carrycot must be used only with the adapters.

Usage instructions

• Check regularly all screws, rivets, bolts, and locking devices in order to make sure they are not broken and functioning properly before each usage.
• Don’t allow the child to lean over the bumper bar or stand in the stroller.
• It’s wise not to use the stroller in dangerous areas such as high and low ground, near stoves or open fire.
• Do not store the product in damp and cold areas.
• Always follow the instructions in this manual.
• Any weight put on the stroller’s push bar, on the backside or lateral side may affect the product’s stability.
• This stroller has been designed for the use of a single child at once.
• It’s forbidden to use accessories that haven’t been approved by the manufacturer.

Cleaning and maintenance

In order to avoid your child getting injuries, regularly check the stroller. Clean the textile parts with a wet brush or a sponge. The frame and the plastic spare parts can be cleaned with a moist cloth and mild detergent.
Check if there are any loose screws, or broken or torn parts and replace them, following the steps indicated by your warranty provider.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>