SUNRISE MEDICAL Empulse F55 Wheelchair Pull Device User Guide
- June 4, 2024
- SUNRISE MEDICAL
Table of Contents
Empulse F55
Compatibility Guide
RevD.:09/2023
| Wheelchair brand / model | Docking |
|---|
Sunrise Medical
Nitrum|
B
Nitrum Hybrid|
B
Helium|
B
Xenon²|
B
Xenon² Hybrid|
B
Xenon² SA|
D
Argon²|
A
Neon²|
A
Easy 200|
A
Easy 300 SA|
A
Easy Life R|
A
Easy Life F|
A
Easy Life SA|
A
Easy Life T|
A
Easy Life T SA|
A
Easy Life RT|
A
Easy Life i SA|
A
Easy max|
A
Easy max SA|
A
Easy Life ECO|
A
Helix²|
D
Rubix²|
D
Basix²|
D
Parix²|
D
Unix²|
D
QS5 X|
A
Meyra
Hurricane (Box)|
A
Hurricane S|
A
Nano|
A
Smart F|
A
RGK
Tiga|
A
Tiga Sub 4|
A
Tiga FX|
A
KI Mobility
Rogue|
E
Tsunami|
E
Ethos|
A
PROGEO
Ego|
C
Exelle|
C
Exelle Vario|
C
Joker R2|
C
Joker Energy|
C
Tekna Advance|
C
Pro Activ
Traveler|
A
Speedy|
A
Buddy|
A
BEROLLKA
Phoenix|
A
Luke SLT|
A
Luke AR|
A
Slade SLT|
A
Slade AR|
A
Sprint SLT|
A
Sprint AR|
A
Fitness|
A
Fitness HEMI Spezia|
A
Küschall
THE KSL (round tube)|
A
K-Series (round tube)|
A
K-Series Attract (round tube)|
A
Champion (round tube)|
A
Ultra-Light (round tube)|
A
Compact (round tube)|
A
Compact Attract (round tube)|
A
The KSL (hydroformed tube from 2019)|
F
K-Series (hydroformed tube from 2019)|
F
Champion (hydroformed tube from 2019)|
F
Please note: The above list is an indication of wheelchair models the F55
can be mounted on. However, frame shape, CoG, wheel-size and seat-depth are of
influence. Additionally, a straight section of the frame tube of at least 35
mm is also necessary for the attachment of the clamps. Therefore it is
essential to try and test it to be 100% sure! Or ask your supplier for advice.
The compatibility guide only shows wheelchairs with a signed combination
agreement. Find docking information on the next page. For potential No-go’s
with Sunrise Medical wheelchairs please refer to the appropriate wheelchair
Order Form.
Empulse F55
Docking Information
The F55 easily fits on almost all common manual folding and rigid wheelchairs with the following dimensions:
Box and open frame or similiar frame type with round tubes diameter (19.5 mm, 23 mm, 25 mm, 28.6 mm & 30 mm) or oval tube (Xenon², Helium). Additional special clamps are available, please refer to the combination overview and the following description.
Mounting position: Optimal angle of the F55 to the ground is 80°. For
optimal performance, it is recommended not to fall below the following minimum
mounting heights (measured from floor to bottom edge of the clamp):
8.5″ FF – 240 mm / 8.5″ SA – 200 mm
14″ FF – 360 mm / 14″ SA – 320 mm
Frame width measured from the center of the frame tube to the center of
the frame tube at mounting position.
– Possible mounting range from 260 mm to 480 mm measured frame width
– If there is an inset, the mounting position of the clamps must be below the
bend
– Measured width differs from the seat width due to the measuring method or
frame version (inset, V indentation, ab- or adduction, etc.)
– Use only the measured dimension and not the seat width to check the
compatibility.
Version A Suitable for round tube with 19.5 mm, 23 mm, 25 mm, 28.6 mm &
30 mm diameters. Adaptable through inserts included in delivery.
Version B Oval tube for Xenon², Xenon² Hybrid & Helium.
Version C For Progeo oval tube frame (not in combination with V frame).
Version D Suitable for Xenon² SA.
Version E 35.5 mm, suitable for KI-Mobility Rogue and Tsunami.
Version F For hydroformed Küschall tube frames from 2019 (The KSL,
K-Series, Champion)
Documents / Resources
|
SUNRISE MEDICAL Empulse F55 Wheelchair Pull
Device
[pdf] User Guide
Empulse F55 Wheelchair Pull Device, Empulse F55, Wheelchair Pull Device, Pull
Device, Device
---|---