Roco 7310014 Diesel Locomotive Instruction Manual

Roco 7310014 Diesel Locomotive

Product Information

Specifications:

• Model: [Insert Model Name]
• Product Number: 7300014-921
• Features: Etched Labels, Water Slide Decals

Product Usage Instructions

Working with Etched Labels:
To achieve proper mounting of the enclosed etched labels, follow these instructions:

1. The etched label surface is covered with paint when delivered.
2. To make the metal numbers and letters visible, remove the paint from the actual letter and numeral surfaces.

Working with Water Slide Decals:

For processing water slide decals:

1. [Include specific instructions for water slide decals here]

Working with etched Labels

Please note! To achieve proper mounting of the enclosed etched labels will you please follow these instructions:
As delivered the etched label surface is completely covered with paint. To make the metal numbers and letters visible the paint must be removed from the actual letter and numeral surfaces: this is done as follows:

1. Before removing the labels from the etched frame place them with their backs on a firm and completely level surface.
2. Remove the paint from the surface of the characters carefully either with the ROCO rubber (art. no. 10002) a sharp knife having a straight edge or similar object (e.g. single-edge razor blade). Take care that while doing this the paint surface between the characters is not damaged.
3. If the result is not satisfactory it is recommended that the remaining paint is removed with a suitable paint remover. Thoroughly dry the labels and then reapply fresh paint. Repeat the removal of the paint from the surface of the characters after the new paint is completely dry.
4. Carefully extract the different labels from their etching frames and remove any remaining burrs.
5. Attach the etched labels with very small amounts of adhesive on top of the printed signs on the vehicle.

ROCO wishes you lots of pleasure with your new model.

Working with water slide decals

FAQ

Q: What should I do if the etched labels are not sticking properly?
A: Make sure to clean the surface thoroughly before applying the labels. You can also use a small amount of adhesive to ensure proper adhesion.

Q: How do I remove water slide decals if needed?
A: To remove water slide decals, gently soak the area with warm water and carefully peel off the decal. Clean any residue with a mild solvent if necessary.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>