Roco 7300033 Diesellokomotive Instructions
- June 1, 2024
- Roco
Table of Contents
Roco 7300033 Diesellokomotive
Product Information
Specifications:
- Product Model: 7300033-921
- Product Name: Etched Labels
- Material: Metal
- Surface: Painted
Product Usage Instructions
Working with Etched Labels:
To achieve proper mounting of the enclosed etched labels, follow these instructions:
- The etched label surface is initially covered with paint.
- Remove the paint from the actual letter and numeral surfaces to make them visible.
Note: Follow the steps above carefully to ensure the metal numbers and letters are clearly visible on the labels.
ROCO wishes you lots of pleasure with your new model.
FAQ
Q: How should I remove the paint from the etched label surface?
A: To remove the paint from the etched label surface, gently scrape it off using a suitable tool or solvent recommended for metal surfaces. Be cautious not to damage the metal while removing the paint.
Q: Can I reuse the etched labels once the paint is removed?
A: Yes, once the paint is removed and the metal numbers and letters are visible, you can reuse the etched labels for mounting on your desired surface.
Working with etched Labels
Please note! To achieve proper mounting of the enclosed etched labels will you
please follow these instructions:
As delivered the etched label surface is completely covered with paint. To
make the metal numbers and letters visible the paint must be removed from the
actual letter and numeral surfaces. This is done as follows:
- Before removing the labels from the etched frame place them with their backs on a firm and completely level surface.
- Remove the paint from the surface of the characters carefully either with the ROCO rubber (art. no. 10002) a sharp knife having a straight edge or similar object (e.g. single-edge razor blade). Take care that while doing this the paint surface between the characters is not damaged.
- If the result is not satisfactory it is recommended that the remaining paint is removed with a suitable paint remover. Thoroughly dry the labels and then reapply fresh paint. Repeat the removal of the paint from the surface of the characters after the new paint is completely dry.
- Carefully extract the different labels from their etching frames and remove any remaining burrs.
- Attach the etched labels with very small amounts of adhesive on top of the printed signs on the vehicle.
**ROCO wishes you lots of pleasure with your new model
**
Documents / Resources
| Roco
7300033
Diesellokomotive
[pdf] Instructions
7300033, 7300033 Diesellokomotive, Diesellokomotive
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>