V-TAC VT-7652 Outdoor Wall Lamp Instruction Manual
- June 12, 2024
- V TAC
Table of Contents
V-TAC VT-7652 Outdoor Wall Lamp
Product Information:
Product Name: Outdoor Wall Lamp
Model: VT:7652
Technical Data:
- SKU No.: 7509
- Input Voltage: AC 220-240V, 50Hz
- Holder: GU10
- Maximum Power: 2 X 20W
- Protection Rating: IP44
- Unit Size: 92x68x150mm
Introduction & Warranty:
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
other queries, please contact our dealer
or local vendor from whom you have purchased the product. They are trained and
ready to serve you at the best.
The warranty is valid for 3 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 hours daily operation. Usage of the product for 24 hours a day would
void the warranty. This product is warranted for manufacturing defects
only.
Product Usage Instructions
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the metal plate on the plastic expansion piece with self-tapping screws.
- Connect the supply leads with terminal.
- Open the lamp and install the bulb in the lamp.
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test.
TECHNICAL DATA
| SKU No. | 7509 |
|---|---|
| Input Voltage | AC:220-240V, 50Hz |
| Holder | GU10 2 X 20W(MAX) |
| Protection Rating | IP44 |
| Unit size | 92x68x150mm |
INSTALLATION DIAGRAM
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the installing
and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased
the product. They are trained and ready to serve you at the best.
The warranty is valid for 3 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only.
! WARNING
- Ensure that the power is switched off before installation.
- Install only by certified electrician.
- Keep this manual handy for future references.
INSTALLATION INSTRUCTION
- Drill two holes on the wall and insert two plastic expansion bolts in it.
- Fix the metal plate on the plastic expansion piece with self-tapping screws.
- Connect the supply leads with terminal.
- Open the lamp and install the bulb in the lamp
- Fix the lamp body on the plate and tighten the screws.
- Switch on and test.
In case of any query/issue with the product, please reach out to us at:
support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest
dealers. V-TAC EUROPE LTD
Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>