Roco 7100009 64 1455-1 Steam Locomotive Owner’s Manual
- June 1, 2024
- Roco
Table of Contents
Roco 7100009 64 1455-1 Steam Locomotive
Product Information
Specifications:
- Product Model: 7100009-921
- Type: Etched Labels
- Manufacturer: ROCO
- Surface: Painted
Product Usage Instructions:
Working with Etched Labels
To achieve proper mounting of the enclosed etched labels, follow these instructions:
- Upon delivery, the etched label surface is covered with paint.
- To make the metal numbers and letters visible, remove the paint from the actual letter and numeral surfaces.
Note: Ensure thorough removal of paint to reveal the intended design of the etched labels.
ROCO wishes you lots of pleasure with your new model. Remember to carefully follow the instructions for best results.
FAQ
Q: How do I properly remove the paint from the etched labels?
A: To remove the paint, use a suitable solvent or paint remover following the manufacturer’s instructions. Gently apply the solvent to reveal the metal numbers and letters.
Q: Can I use any type of adhesive to mount the etched labels?
A: It is recommended to use the provided kleben cement coller for securely attaching the etched labels. Other adhesives may not provide the same level of durability and adhesion.
Working with etched Labels
Please note! To achieve proper mounting of the enclosed etched labels will you please follow these instructions: As delivered the etched label surface is completely covered with paint. To make the metal numbers and letters visible the paint must be removed from the actual letter and numeral surfaces. This is done as follows:
- Before removing the labels from the etched frame place them with their backs on a firm and completely level surface.
- Remove the paint from the surface of the characters carefully either with the ROCO rubber (art. no. 10002) a sharp knife having a straight edge or similar object (e.g. single-edge razor blade). Take care that while doing this the paint surface between the characters is not dam-aged.
- If the result is not satisfactory it is recommended that the remaining paint is removed with a suitable paint remover. Thoroughly dry the labels and then reapply fresh paint. Repeat the removal of the paint from the surface of the characters after the new paint is completely dry.
- Carefully extract the different labels from their etching frames and remove any remaining burrs.
- Attach the etched labels with very small amounts of adhesive on top of the printed signs on the vehicle.
ROCO wishes you lots of pleasure with your new model.
Documents / Resources
| Roco
7100009 64 1455-1 Steam
Locomotive
[pdf] Owner's Manual
7100009 64 1455-1 Steam Locomotive, 7100009, 64 1455-1 Steam Locomotive, Steam
Locomotive, Locomotive
---|---