LITETRONICS HBS200B6 LED Round High Bay SL Pendant Mount Instruction Manual
- June 1, 2024
- Litetronics
Table of Contents
Pendant Mount Kit for Round High Bay SL Gen 3 (HBSAM22)
Installation Instructions
Compatible Models
HBS200B6
HBS200B6HV
SAFETY INSTRUCTIONS AND WARNINGS
- When using electrical equipment, basic safety precautions should always be observed
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved
- Installation should only be conducted by a qualified electrician in accordance with NEC and any relevant local building codes.
- Be certain electrical power is OFF before and during installation and maintenance.
- To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or sharp objects.
WHAT COMES IN THE BOX
Pendant Mount
Screw (x1)
Installation Instructions
REQUIRED TOOLS
Phillips Screwdriver
INSTRUCTIONS
Before Installation, carefully remove all parts from the packaging. Inspect
product for defects due to shipping.
Always turn off the power supply from main circuit breaker first!
PENDANT INSTALLATION
-
Loosen mount screw of the round high bay SL. (Figure 1)
-
Place pendant mount atop round high bay SL base and tighten. Once pendant mount is affixed to base, tighten mount screw. (Figure 2)
-
Feed wire through pendant mount slot and conduit pipe. Tighten pendant screw to conduit to secure mounting. (Figure 3)
-
Once round high bay SL is supported, attach the included safety cable to a beam or permanent structural support.
Note: Mounting structure must support the full weight of the fixture in accordance with local codes. -
Turn power back on.
Thank you for choosing
6969 W. 73rd Street
Bedford Park, IL 60638
WWW.LITETRONICS.COM
[email protected] or
1-800-860-3392
The information and product specifications contained in these instructions are based upon data believed to be accurate at the time of printing. This information is subject to change without notice and without incurring liability. If you have questions regarding specific product details, please contact us at 800-860-3392 or via email at [email protected]. To check for an updated version of these instructions, please visit www.litetronics.com.