LITETRONICS VLF Series Vivid LED Frame Instruction Manual
- June 12, 2024
- Litetronics
Table of Contents
VIVID LED FRAME
Installation Instruction
Ordering Code: VLF Series
WHAT COMES IN THE BOX
- (2)L Style bars
- (2)Straight bars
- (1)LED Driver
- (1)Grid mounting clip and screw
- (3)Wiremu’s
- (1)Split snap bushing
- (1) Installation instruction
TOOLS NEEDED
- Wire tripper
- Wire Cutter
- Phillips Screwdriver
- Step Ladder
INSTALLATION
BEFORE BEGINNING INSTALLATION, TURN OFF POWER AT THE CIRCUIT BREAKER.
-
Unbox and inspect the Vivid LED Frame to understand it’s components.
-
Turn off power at the electrical panel, refer to .
-
Assemble the frame by connecting the two L style bars (part 1) to the straight bars (part 2), refer to 2.
-
Lock the grid mounting clip on driver junction box with screw, refer to 3).
-
Raise the assembled fixture above the grid, then lower it until it rests between the t-grid and tile, refer to 4.
-
Select the preferred wattage and color temperature by adjusting the slide switches located on the driver.
Wattage settings:
• 2’x2′ fixture: 18W (2,250 lumens)127W (3,375 lumens)136W (4,500 lumens)
• 2’x4′ fixture: 24W (3,000 lumens)135W (4,375 lumens) 45W (5,625 lumens)
CCT settings:
• 3500K14000K15000K . -
Make wiring connections to the driver with wire nuts, following the guidelines below, refer to 5.
Black = AC Line
Purple=Dimming (+)
White = AC Neutral Pink = Dimming (-)
Green = Ground -
Punch the knockout, insert the provided snap bushing into the knockout to protect the wires, then connect the female and male DC connectors, refer to (6).
-
Clip the driver to the t-grid close to the fixture power cord, refer to 7.
-
Connect the safety cable on mounting clip, refer to 8.
-
Your installation is complete. Restore power, refer to 9.
Thank you for choosing 
6969 W. 73rd Street
Bedford Park, IL 60638
www.Litetronics.com
CustomerService@Litetronics.com or
1-800-860-3392
The information and product specifications contained in these instructions are
based upon data believed to be accurate at the time of printing. This
information is subject to change without notice and with out incurring
liability. If you have questions regarding specific product details, please
contact us at 800-860-3392 or via email
at customerservice@litetronics.com.
To check for an updated version of these instructions,
please visit www.litetronics.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>