ZEBRONICS ZEB-MUSIC_BOMB_2 Portable BT Speaker User Manual
- June 1, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-MUSIC_BOMB_2 Portable BT Speaker
Thank you for purchasing ZEB-MUSIC BOMB 2 Portable BT Speaker. Please read the user manual carefully before usage & save it for future reference.
Note: Avoid the use of this product in hightemper at u re and high-
humidity environments.
Avoid the self-disassembly of the products or it results in voiding the
product’s Warranty.
https://zebronics.com/pages/warranty-policy
Features
- BT vS.l
- USB / mSD / AUX
- 80W RMS Output
- Upto l0h* Backup
- TWS Function
- 2-Way Speaker
- 6.3mm Guitar Input
- 6.3mm & 3.5mm Microphone Inputs
- Wireless Microphone
- Type-C Charging
- Detachable Carry Strap
- Media, Volume & Bass control
- Built-in Rechargeable Battery
- Speaker Drivers on either side
- Remote Control
- Karaoke & Recording Function
Specifications
- Output Power (RMS): SOW
- BT Version: 5.1
- Driver Size
- Tweeter: 7.62cm x2
- Woofer: 10.16cm x 2
- Speaker Impedance
- Tweeter: 40
- Woofer: 40
- Frequency Response: 20Hz-20kHz
S/N Ratio :: ::58dB
Max Supported
- USB/mSD memory size: 32GB
Supported
- Audio formats: Mp3
- Charging time: 6 h
- Playback time: 10 h*
- Product Dimension
- (Wx D x H): 30 x 14 x 16 cm
- Net. Weight: 3.2kg
Package Contents
- Speaker: 1U
- Charging Cable: 1U
- AUX Cable: 1U
- QR Code Guide: 1U
- Carry Strap: 1U
- Wireless Microphone: 1U
- Remote Control: 1U
Description
Button Description:
Port Description:
Microphone Description:
- LED Display
- Microphone Volume
- Effects Volume
- Indoor & Outdoor Modes
- Effects selection
- Power On/Off
- Type-C Charging port
Remote Inscription
Wireless Microphone:
- LED Display indicates the microphone’s Pairing and battery information.
- Use these buttons to increase/decrease the microphone’s volume (Mic volume and echo controls also reflected in wired Mic).
- Use these buttons to increase/decrease the microphone’s effects volume.
- Single press this button to change the microphone’s mode to Indoor or outdoor
- Single press this button to toggle between reverb and echo effects for the microphone.
- Press and hold this button for 2 seconds to Power On/Off the microphone.
- Use Type C cable for charging the wireless microphone with a DC SVadapter.
( Note: The wireless MIC connects to the speaker automatically once it’s turned on)
MODES
BT Mode:
Turn ON BT on your phone, tablet or laptop and search for the nearby BT
devices. Search for the BT name “ZEB-MUSIC BOMB 2” and tap on it to connect.
Micro SD/USB Mode:
- Once the speaker is ON, insert the Micro SD card/USB drive into the respective ports and the speaker will automatically detect the MP3 tracks from the USB drive/Micro SD card and starts the Playback.
- The speaker will enter into these modes only if the drive is connected.
TWS Function:
- Power ON two ZEB-MUSIC BOMB 2 speakers and make sure the speakers are in BT discovery mode.
- Press theTWS button in both speakers to activate TWS mode. After few seconds, both the speaker will be connected.
- Now, search for nearby BT devices in your source device and tap on the BT name “ZEB-MUSIC BOMB 2”
- Press the TWS button again to disconnect from TWS Mode.
AUXMode:
The speaker can be connected to an audio source using a 3.5mm to 3.5mm cable.
Connect the one end of the 3.5mm connector to the speaker and the other end of
the cable to an audio source. The speaker automatically detects the input and
the songs from the audio source can be heard through the speaker.
( Note: Kindly decrease the volume of the speaker while plugging in the
Aux and wired Mic ports.)
Charging the Speaker:
Connect the charging cable to DC SV Type C port of the speaker and insert the
other end into a DC SV power adapter.
LED Indication:
- The Red LED On, indicating the speaker is being charged.
- The Red LED goes off after the speaker gets fully charged.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>