ZEBRONICS SBSPK C2 Sound Bar User Manual
- May 15, 2024
- ZEBRONICS
Table of Contents
**ZEBRONICS SBSPK C2 Sound Bar User Manual
**
Caution:
-
To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user serviceable parts inside.
-
Refer servicing to qualified personnel only.
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute an electric shock to adperson or persons.
Important! This symbol alerts you to read and observe important warnings and instructions on the unit or in this manual.
Notice:
- To prevent possible hearing damage, do notlisten at high volume levels for long time periods or a sudden high volume level.
- Never use the device unsupervised! Switch off the device whenever you are not using it, even if not using it only for a short while.
- The appliance is notintended to be operated by means of an external timer or separate remote control system.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid hazard.
- Before operating this system, check the voltage of this system to see if it is identical to the voltage of your local power supply.
- The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and atleast5 cm of space on each side of the unit.
- The apparatus must not be exposed to dripping or splashing liquid, no objects filled with liquids such as vases, should be placed on the apparatus.
- To prevent fire or shock hazard, do not expose this equipment to direct heat, rain, moisture or dust.
- Do not position this unit near any water sources e.g. taps, bathtubs, washing machines or swimming pools. Ensure that you place the unitonadry, stable surface.
- Do not place this unit close to a strong magnetic field.
- Do not place the unit on a amplifier or receiver.
- Do not place this unitin a damp area as the moisture will affect the life of electric components.
- Do not attempt to clean the unit with chemical solvents as this might damage the finish. Wipe with a clean, dry or slightly damp cloth.
- When removing the power plug from the wall outlet, always pull directly on the plug, never pullonthe cord.
- Depending on the electromagnetic waves used by a television broadcast, if a TV is turned on near this unit while it is also on, lines might appear on the LED TV. Neither this unit nor the TVis malfunctioning. If you see such lines, keep this unitwell away from the TV set.
- The mains plug is used to disconnect the device, the disconnected device should remain readily operable.
Power Source:
This sound bar is designed to operate in DC 24V = 1.25A.
Product Representation
Sound Bar & Sub-Woofer
- LED INDICATOR
- POWER/INPUT
- VOL+
- VOL-
- AUX
- OPTICAL
- HDMI (ARC)
- USB
- DCIN
- SUBOUT
- SW SPEAKER
Remote Control
-
Standby : Standby mode for power on/off.
-
Input : Different input mode selection.
-
Vol+ : Volume increase.
-
Prep : Prep track. (only work under USB and BT mode.)
-
Vol- : Volume decrease.
-
Tre – : Treble decrease.
-
Bass – : Bass decrease.
-
Mute : Mute mode.
-
Play/Pause/Reset
Play/Pause : Play or pause for current track. (only work under USB and BT mode)
(only work under USB and BT mode)
Reset : Press and hold the button more than 2 sec. to Set all functions to manufacturer defaults. -
Next : Next track.
(only work under USB and BT mode.) -
Tre+ : Treble increase.
-
Bass+ : Bass increase.
-
EQ/Pair
EQ : Press in one time for one mode of EQ. Music/Movie/News/3D total four modes
Pair : Press and hold more than 2 sec. to disconnect paired BT device. Press and hold more than 2 sec. to connect back last disconnect BT device.
Positioning the Sound Bar
PlaceonaflatSurface
Place the sound bar horizontally on a flat surface such as a TV unit or
shelves and align it centrally with the TV screen. Allow some space between
the speaker and the wall. Don’t place inside a cabinet or an a walled shelf.
Follow this guidance for best sound output and good airflow around the sound
bar.
Mouton the wall
WARNING : If you don’t feel confident to correctly and securely wall- mount the sound bar, Seek the assistance of an experienced person or professional.
Install the speaker on a vertical, fast, reinforced area of wall. For plaster
walls, it is recommended to screw into wall studs for greater security. For
optimum performance, allow at least 25mm/1″distance between the sound brand
the TV.
Follow below steps to mount the sound bar on the wall
- Make 2 holes on the wall with distance same as the wall bracket on the sound bar
- Put the plastic anchors onto the wall and secure the screws to the plastic clip, do not tighten the screws all the way make sure leave some space
- Attached the 2 EVA pads onto the wall mount bracket. This will make sure that there is enough space between the wall and the soundbar outlet, minimum 15mm
- Once the screws securely fastened, hang the sound bar over by inserting the screws onto the wall mount bracket
OPERATE INSTRUCTIONS
Setting the Sound bar
- Plighted power cord in and the LED will light up.
- Press the power/input button either in sound bar or remote control to select the mode you need with the remote controller. The indicator can change to different colors, representing different states:
Blue :BTPairingMode
Orange : Optical mode
Cyan :HDMI(ARC)Mode
Green :AUXMode
Pink :USmodels
Powering On/Off
- Plug the sound bar adapter into a wall outlet, it will automatically enter standby mode
- Short-press the power/standby button eitherin soundbar or remote control to turn on the soundbar.
- To turn off, press either the STANDBY button on remote control or sound bar or unplug from wall outlet.
Using the Sound bar
Playing Audio via BT Connection
-
Use “Input” button on the remote to activate BT mode. A Blue LED indicator will indicate that BT mode has been selected.
-
Activate the pairing function on your phone of other compatible device and select
“ZEB-JUKE BAR 3902″ -
When successfully paired, you will hear a tone and the LED will stay on
-
The remote control includes BT mode playback controls
Notes :
- If your pairing device switched off or manual disconnected, the sound bar will automatically enter pairing mode.
- If the connected device is switched off or manual disconnected, the sound bar will automatically enter pairing successfully connected device will be re-established once you re-enter wireless range (10 meters). To connect to other devices, repeat the above pairing steps.
Playing Audio via USB Port
When the USB flash drive is plugged in, the sound bar automatically switches to USB input mode. A Pink LED indicator will indicate that USB mode has been selected. This mode cannot be selected on the sound bar or remote control unless aUSBflash driveisinserted.
- Ensure that your USB flash drive contains MP3 audio files
- Connect the USB flash drive to the USB port on the sound bar (or your own USB extension cable connected to the USB port); music will automatically play
- The remote control includes USB input mode playback controls
Audio input (AUX) Connection
- Use the “Input” button on the remote to activate AUX mode. A green LED indicator will indicate that AUX mode has been selected.
- Playback functions (play/pause, tracks, pair) cannot be adjusted through the Sound Bar remote when in AUX mode.
HDMI (ARC) Mode
- Use the “Input” button on the remote to active HDMI(ARC) mode. A Cyan LED indicator will indicate that HDMI(ARC) mode has been selected.
- The Soundbar supports HDMI with Audio Return Channel(ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using asingle HDMI cable
- Using a High Speed HDMI cable, connect the HDMI (ARC) connector on the soundbar to the HDMI ARC connector on the TV. The HDMI ARC connector on the TV might be labelled differently. For details, see the TV user manual.
Optical Mode
- Use the “Input” button on the remote to active Optical mode. An orange LED indicator will indicate that Optical mode has been selected.
- Playback functions (play/pause, tracks, pair) cannot be adjusted through the Sound Bar remote when in Optical mode.
Troubleshooting
| P e01111.11STIOUIKE | POSSUM CALM | sunroom |
|---|---|---|
| Mere it ro nail DAIDA Air soun too | …,.-,,n now sowte is wet in . | ‘44‘, On |
4PPIDOrtne input mune
1-• mote Anthem is snows –| ‘ ince the mile Isroson
The nen of sourd bar Cr Ts’ ..–•.s, .:eu. r r. 4.1Dran.1 10011AV| flue’s<
the vOluene lend On Sawa tor or t. ,.soy tweet/ to TV.
T. puree Lets se Ow unt 44 e rtr. correcled trope°,| · AA one thal de
power teste el ds• unsold as reptant to an AC wall outlet worry
In lees 041 4 Wore it den.. a . . . , …..| 2 rent the stout sad co
de card bar and . he vela set on the 0.jtotl dance
stews that the sound be canna Matisse when berg woe| ended sound tor
&M TV or other claims ate moose be an sal o Elbe term (ugh 1V Inn I :on
asps. West the °wren judo rpm and. tp4 We we no dull onto meet setting
‘,the et:stack °ere to PCM la nest Seta the “PA lamest d our surd her is PCM
re It A teed. he &cadre format of TY or other Onsets ell be ‘grand to PCM
‘isle
The sound IS distorted ot /snood| m’V tau not
uted| r era On aura, from TV drove en sound bar. r AA lure that the TY 4
tartan
R. ‘ohne cheerers when the urn n here / no| 1’0 art4CeraIK ni1.1944
aderszesere llectlon is
, e seed TO peewee mein, levelness. de : atcenactalle <wools its
yotamenthentsn erel when the one is tuned on| Turn up the WILMA it •
Ktated
NO64 4 M.. J| · sound be 6100 SAGto arether ..: 4.11 Or hie !repent) deem|
:Luna ‘how drninnr Ant Own ID. 4.ound be
Ile woe (Anne be °Muted by nett de henna enrol| . Loa n cm afore none ret
rare| … duo eamot. toured neon the spewing ‘eat
. letters MS neat.| “InWenswth nee entries
L. i14/1010 (0,1001 lance vt :I 0 r r r: .4 n expred to deed suntan D’
Strung Ire co| Ai“! The Wu era C. 4 6004.COn the cord NU%MIA
pee our product tertoot be used in entice
Me 11/ terve b• earned be can theTV s remota canted.| The unit is Wow re the
IV, remote causal sew| r•Ivron the we DOthat 0 doer ‘Cl obstruct the Trs
smote contra sensor.
A device cannotcorrect the spend be w tee vet canna be careened to a lasetooth
dente| teuelooth race of the deem is .et admen, rot pared w covalent
wreCtly.| :seen’ Ow sound he And by prone age n You Prove
4A enabled 04 Buecooth hauler of the dna. see· hr 0140 rossossl of the
dence on how to enable the Iutoton and correctly corrected the ante. The
sound in is a Sheet evolootsed hot , soothe , ‘ Stietto – A1 ,
doge :titan – on the terrecUd Ciente and den try agars
Sunman Is not selected as du lope tourer| etc Mounds n the recut sone
The unit Is connected to a dine /tr. antooth dant,| n par the BLetooth dente
dal os ow–reedy connected sol be win de doled teueotd, deem
me tee 4 wo be wet km tee Rain’- se, .| ‘A ye the Ilietooth dents dose to
din unt
· deolCa emtung raWcUcatagneut Ain 1%4T4D en e anotwore pen S Ana” •
11104 as so ontmer be plated nee I .| -u rutse the sine rear dens due emit
–v!OtrOnnajnet( 04.1425
The antooth deem that slur are brie nes not support the protocol| Use •
bletoviti owe • the Leases the Vonece
The connection peen le regneered A Inn BIRICKRA dente may not be hanctonrs|
Debate be connezon pole r the SLAIOOth dente and then (Coned the evened, dente
To ths wit
fn[wrest, some mown
Sound sally of Judo pas from a tunnelled lawn to deem es One and corroder
o me stable| The Bletrea munition hp”| Ku, the deem dose. tO the sound be.w
•en’s so, C4ritSCA beaten de Oen.? and ‘he sold NV
No used tan be rated cr sound treats 04.444000v Mai| The selves on the 11
Lail0C4h Own.” r r be too Low| .r4 Is 11,4 vcd writ an the IlAntooth
<Inn
Sinnott s not selected at the tree Sane| –44144:t de ausateran a the met
mete
Plots on We owes ha not bean wearies| Reform playback on the Oro co.
the sound mope cc the gbanooth tenet may not be en to de we.| “wood MI en alb.
Output Omit. On he I berm, deuce
the connection to the Inetocolls den, was ta WI| .winced Eh the anent deuce
one ewe tine
The unit mat te too to away from Me InTouch deer| Fetes the Bluetooth data
road dos an
e101111111MTR00111 I| POW IR i CAUSE| SOLUTION
---|---|---
| A ‘Arne ofTitItri sknIraltiettileit yaw. the, zn a micrveAsse open. a
wireless dente and 4.0 and my be plated nearby.| an Mt 1.15e they tint nem.
Owe tat emit eletitOte bett Awes.
There is re lewd from sans hat -/AMU TY (ARC) Mode| In infect HMI taint it
Lead t Auvug nu ap–o I to be sent to sou ndto rIn WIPES Mita mud ,.. nimbi.’|
1. Make sure chat the use connected TV and s►nt bar drys 19•core ND ARC
cable2. The sound bar and TV are connected dvough Dia) KO output nine sure
due the The IS ARC compliantR Set the TV to NMI ARC MCISet the audio oat
mode of 1V to POW kerne,. tar retie to your TV user marvel)
There Is re %YAWS born Wind tinIOPTICAL Model| OPTICAL catae might be damaged
..111d re wire I nretalAwd by Ihe nitrite Sao Cu a tailed connection and
inccrrect cperat on mode se et Ins.| 1.11/4pLut the OPTICAL cabs etch a new
one 10 cornea2. Set pair TV patio ch.r.put to POW forma CMS refer to your 7V
use ‘*small
Them is re Nen • LI hum so-nd bar 11)58 model_| US9 Me type is not support &
Sound bar doesn’t swath to US8 input ers:41w automatedly when LIS8 6
Inserted.| Mete sure that U59 nosh drone contains MP] has because other lie
types are rot supported Snitch the 11VA mode once agar. OlenplaW)ack again_
Features:
Wireless BT/USB/AUX/Optical/HDMI(ARC)
11.43cm Subwoofer
Remote control
LED Display
Wall Mountable
Volume/Media Control
External Power adapter
Virtual 5.1
Specifications
Output Power (RMS)
Subwoofer : 60W
Sound bar : 20W x 2
Total : 100W
Driver Size
Subwoofer : 11.43 cm x 1
Sound bar : (5.2 cm x 7.5 cm) x 2
Impedance
Subwoofer : 6Ω
Sound bar : 4Ω
Frequency Response :55Hz-20kHz
S/N Ratio :270dB
Separation :232dB
File format support :MP3(USB)
Lineinput :3.5mm, Optical IN, HDMI(ARC)
Max supported
memory size (USB) :32GB
Baume 1 ZEB-JUKE BAR3902
Version :5.0
Product Dimension (Wx D x H)
Subwoofer :10×18.5×35.5cm
Sound bar :60×7.5×6.4cm
Net. Weight
Subwoofer 11.75kg
Sound bar 11.1kg
Total :2.85kg
Package Content
Sound Bar 11U
Subwoofer 11U
Remote Control 11U
Input Cable 1uU
Wall Mount Fasteners :1U
Power Adapter 1uU
QR Code Guide 11U
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>