ZEBRONICS ZEB-RAINBOW 4.1 Channel Speaker User Manual
- October 30, 2023
- ZEBRONICS
Table of Contents
ZEB-RAINBOW 4.1 Channel Speaker
**User Manual
**www.zebronics.com
ZEB-RAINBOW 4.1 Channel Speaker
Thank you for purchasing the ZEB-RAINBOW – 4.1 Speaker. Please read the user
manual carefully before usage & save it for future reference.
Note:
• Avoid the usage of this speaker at the high temperature and high humidity
environment.
• Avoid the self-disassembly of the product as it results in the failure of
Warranty.
Features
4.1 Channel speaker
Wireless BT/USB/AUX/FM
LED Display
Volume & Bass adjustment
RGB Lights
Remote control
Wall mountable
Specification
Output power (RMS)
Subwoofer: 20 Watts
Satellite:10 Wattsx 4
Total: 60 Watts
Driver size
Subwoofer: 10.16cm
Satellite: 7.62cm x 4
Impedance
Subwoofer: 4Ω
Satellite: 6Ω
Frequency response: 40Hz – 20kHz
S/N Ratio: ≥80dB
Separation : ≥45dB
File format
support (USB): MP3
Line input: 2ch
RCA Max. supported USB
memory size: 32GB
FM Frequency range: 87.5 MHz – 108 MHz
BT Name: ZEB-RAINBOW
BT Version: 5.0
Product dimension
Subwoofer: 15 x 28 x 20.8 cm
Satellite: 10.3 x 8.5 x 14.5 cm
Net. weight
Subwoofer: 2.82kg
Satellites: 216g x 4
Total: 3.68kg
Package content
Subwoofer: 1 U
Satellite: 4 U
Remote control: 1 U
Input cable: 1 U
QR Code Guide: 1 U
Control panel description
Back panel description
Remote control- Type 1
Power: Standby ON/OFF
Numeric Pad (0-9): To select Particular track from USB drive directly or
to enter FM Channel frequency directly
Vol+: To increase the volume
Prey: To select the previous tracks in BT/USB or to Tune in FM mode
Vol-: To decrease the volume
RPT: To Switch between available repeat modes
Scan: To scan all FM channels available
Mode: Mode Selection(BT/AUX/USB/FM)
EQ: Short press to use Equalizer
Play/Pause: To Play / Pause for current track. To Switch next channel in
FM mode
Next: To select the next tracks in BT/USB or to Tune in FM mode
Mute: To Mute / Unmute
Remote control- Type 2
Power: Standby ON/OFF
Numeric Pad (0-9): To select direct tracks from USB and to select two
digits and above, by consecutively pressing
Vol+: To increase the volume
Prey: To select the previous track in BT/USB or channels in FM mode
Vol-: To decrease the volume
RPT: To Switch between REP ALL track or REP 1 track
Mode: Mode Selection(BT/AUX/USB/FM)
EQ: Equalizer
Play/Pause: To Play / Pause for current track & FM Scan (Press & Hold)
Next: To select the next track in BT/USB or channels in FM mode
Mute: To Mute / Unmute for currently playing track
General Instructions
BT Mode: Switch the speaker to BT mode, Scan for nearby BT devices in
your device. Tap on “ZEB-RAINBOW” to connect.
USB Mode: Insert the USB flash drive to the speaker. The speaker will
detect the USB and the audio files from flash drive will be played
automatically. (This mode isn’t selectable on the speaker or remote control
unless a USB flash drive is connected). Ensure that your USB flash drive
contains MP3 files (other file types not supported).
FM Radio: Switch the speaker to FM mode. In FM mode, press & hold the
“Play / Pause” button in the control panel to scan for the available FM
channels. Once the scanning is done, the scanned channels will begin to play.
The next button or previous button in the remote or control panel can be used
to change the FM channels.
AUX-IN: The speaker can be connected to an audio device using an RCA to
3.5mm cable. Connect the one end of the cable to the speaker and the other end
to an audio source.
The tracks from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>