ZEBRONICS Zeb-Basso 100 5.1 Speakers User Manual
- October 27, 2023
- ZEBRONICS
Table of Contents
ZEBRONICS Zeb-Basso 100 5.1 Speakers User Manual
Dear Customer,
Thank you for purchasing the ZEB-BASSO 100 2.1 Speaker. Please read the user
manual carefully before usage & save it for future reference.
Note:
- Avoid the usage of this speaker at the high temperature and high humidity environment.
- Avoid the self-disassembly of the product as it results in the failure of Warranty.
- Please turn off the power and pull out the plug, when the speaker is not in use.
Features
2.1 channel speaker
BT v5.1 / USB /AUX/ FM
LED display
Remote control
Wall mountable
Volume, Bass & Treble Control
Specifications
Control Description
-
VOLUME/BASS/TREBLECONTROLKNOB
Volume Control: To adjust volume level
BASS Control: To adjust Bass level
Treble Control : To adjust Treble level -
INPUTMODE(AUX/BT/FM/USB)
-
LED DISPLAY
-
PREV / FM CHANNELS.
-
USB PORT
-
PLAY/ PAUSE/SCAN
-
NEXT/FM CHANNEL+
Back Panel
Remote Control
Power: standby ON/OFF
Numeric Pad( 0-9): To select particular track from USB drive directly or
to enter FM Channel frequency directly
Vol+ : To increase the volume
Prev: To select the previous tracks in BT/USB or to Tune in FM mode
Vol-: To decrease the volume
RPT : To Switch between available repeat modes
Scan : To scan all FM channels available
Mode: Mode Selection (BT/ AUX/USB/FM)
EQ: Short press to control BASS and short Press again to control TREBLE.
Long Press to use Equalizer
Play/Pause To Play/ Pause the current track. To switch next channel in FM
mode
Next: To select the next tracks in BT/USB or to Tune in FM mode
Mute To Mute/ Un mute
General Instructions
BT Mode:
Switch the source to BT mode, scan for nearby BT devices on your device. Tap
on “ZEBBASSO 1002.1″to connect.
USB Mode:
Insert the USB drive to the slot provided on the subwoofer. It will detect the
USB and the audio files from drive will be played automatically.
FM Radio:
Switch the source to FM mode. Press the SCAN button in the remote or control
Panel to scan the available FM channels. Once the scanning is done, the first
scanned channel will begin to play. Use “Play/Pause” button on the remote to
go to next channel.
AUX-IN:
The device can be connected to an audio device using an 2 Channel RCA to 3.5mm
cable. Connect the one end of the cable to the speaker and the other end to an
audio source.
The songs from the audio source can be heard through the speaker.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>