ZEBRONICS ZEB-YOGA 4 Yoga 4 In-Ear Wireless Earphone User Manual
- October 30, 2023
- ZEBRONICS
Table of Contents
ZEBRONICS ZEB-YOGA 4 Yoga 4 In-Ear Wireless Earphone User Manual
Thank You for purchasing ZEB-YOGA 4 Wireless neckband earphone. Please read this user manual carefully before operation & save it for future reference.
Note:
- Charge the wireless earphones fully before using it.
- Please charge the product with a power adapter output rated DC 5V.
- Do not self-disassemble the product or it will result in the failure of warranty.
- Make sure not to use this product at any high-temperature or high humidity environment.
Caution:
Listening at high volume can cause hearing impairment. Please limit your usage
time at high volume.
Features
- Wireless BT earphone with Neckband
- Volume/Media Control
- Call Function
- Voice Assistant support
- Built-In Rechargeable Battery
- Flexible Neckband
Specifications
BT Version : 5.2
Supported BT Profile : HFP / SPP / A2DP / AVRCP
Drive size : 14mm
Speaker impedance : 160
Playback time : 22h
Charging time : 2h
Talk time : 22h
Net. weight : 24.8g
Package contents
Neckband : 1 U
Earbuds : 4 U
Charging cable : 1 U
QR Code Guide : 1 U
Usage Instruction:
Bluetooth Pairing Instructions:
STEP 1 – Press and hold the MFB to power ON the earphones and to take
them into pairing mode with Red & Blue LED blinking alternatively.
STEP 2 – Switch ON the Bluetooth in your mobile phone & search for the BT
name “ZEB-YOGA 4”
STEP 3 – Once the BT name is visible in your mobile phone, tap to connect
it.
Product Representation
Button usage:
MFB Single short press: Play/Pause & Answer/End Call
MFB Double short press: Redial
MFB press for 3 sec: Wakes Voice assistant
MFB Long press: Call Reject
Short press +/- : Volume Up and Down
Long press +/- : Next / Previous
Activating Smart Phone’s Voice Assistant:
When the neckband is connected to a mobile phone, Press and hold the MFB for 3
seconds to activate voice assistant.
Note: Smart phone should have an active internet connection to use the voice assistant function.
Call Function:
- Short press the MFB to attend or end the incoming call.
- Press and Hold the MFB for 2 seconds to reject the incoming call.
- Double press the MFB to redial the last dialed number.
Charging Instruction:
Connect the Type-C charging cable to the charging port of the earphones &
connect the other end to the DC 5V adapter.
LED Indication:
Charging indication: Red LED glows
Full charge indication: LED turns Off
BT Discover mode: Red & Blue LED blinks rapidly till it gets paired
When connected to a Phone: Blue LED will blink once in an interval of 5
sec