SPRACHT H15 TWS Wireless Earphone User Manual

June 1, 2024
SPRACHT

SPRACHT H15 TWS Wireless Earphone

SPRACHT-H15-TWS-Wireless-Earphone-product

Packing list

SPRACHT-H15-TWS-Wireless-Earphone-fig- \(1\)

Product introduction

  1. Do not try to disassemble or replace the product except for the operation mode specified in the instructions Any part of.
  2. Do not put the product into water or any other liquid, this product is not a waterproof design.
  3. If any liquid accidentally enters the product, immediately disconnect and remove the product Product.
  4. To avoid electric shock, please ensure that your hands are free from water when installing or unloading the product.
  5. Do not place the product near the heat source or expose it directly near the fire source.
  6. Do not place this product in an environment with strong electromagnetic force, otherwise it will cause product failure.

Product standard

  • Product model: RIRO TWS L20
  • Bluetooth version: V5.3
  • Transmission distance: ≤10m
  • Battery capacity: 35mAh
  • Duration: about 4 hours (earphone)
  • Charging time: about 2 hours (earphone)
  • Rated input: 5V 30mA

Charging case specifications

  • Battery capacity: 300mAh
  • Charging time: about 2 hours
  • Rated input: 5V 300mA
  • Rated power: 1.11Wh
  • (All technical information is subject to actual performance)

Charge the charging box

  • Connect the charging case to the 5V power adapter with the

Type-C charging cable

  • (Warm tip: When opening and closing the lid, the white light flashes 5 times, please change the charging box in time)SPRACHT-H15-TWS-Wireless-Earphone-fig- \(2\)

LED Indicator Status

SPRACHT-H15-TWS-Wireless-Earphone-fig- \(4\)

Product Operation Instructions

Power on
Method: When the earphones are charging the case, open the upper cover of the charging case and the earphones will automatically turn on and pair left and right for 2-3 seconds

Power off
Put the earphones into the charging case, and automatically turn off and disconnect 3-4 seconds after closing the cover

pair
Step 1: Bluetooth pairing is automatically entered after the device is turned on
Step 2: Open the Bluetooth list of smart devices, search for “H15” and connect

SPRACHT-H15-TWS-Wireless-Earphone-fig- \(5\)

Touch key operation

SPRACHT-H15-TWS-Wireless-Earphone-fig- \(5\)SPRACHT-H15-TWS-Wireless-Earphone-fig- \(7\)

Clear away pairing/factory data reset

  • Open the charging compartment cover and press the charging compartment button for 10 seconds to clear the headset and pair the phone
  • Headset on state If the phone is not connected to the pairing state, press the headset touch button 5 times to restore factory Settings.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC  Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

RF Exposure
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment can be used as portable exposure without any restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals