SPRACHT IE-100 In Ear Hearing Protective Buds User Guide

SPRACHT IE-100 In Ear Hearing Protective Buds

Product Information

• Specifications:
  • Product Name: In-Ear Hearing Protective Buds with Bluetooth Connectivity
  • FCC ID: OSF-IE-100
  • Charging: Micro-USB interface for the box
  • Bluetooth Range: Up to 10 meters
  • Compatibility: Works with mobile phones supporting Bluetooth connectivity
• Hearing Function Control:
  • To pause the hearing function, double-click the R or L touch button. Repeat the action to turn the hearing function back on.
• Bluetooth Connectivity:
  • Connect the headset to your mobile phone via Bluetooth to listen to audio signals and music.
  • Use the touch button to pause/play music. To answer a call, press the R or L touch button and press again to hang up.
• Bluetooth Disconnection and Reconnection:
  • If the distance between the earphone and mobile phone is more than 10 meters, you will hear a disconnection alert. Re-enter within 10 meters to successfully reconnect.
• Charging Instructions:
  • Headset: Place the headset in the charging box to charge. The headset will turn red during charging and the full light will go out when fully charged.
  • Box: Charge the box using the Micro-USB interface. Four LEDs indicate the charging status, flashing during charging and showing full light when fully charged.
• FCC Warning Statement:
  • This device complies with FCC Rules.
  • Users must avoid modifications that are not approved as they could void the user’s authority to operate the equipment.
• FCC RF Exposure Statement:
  • The device meets general RF exposure requirements and can be used without restrictions in portable exposure conditions.

FAQs

• Q: How do I know when the headset is fully charged?
  • A: The headset will turn red during charging and the full light will go out once it is fully charged.
• Q: What should I do if the Bluetooth connection is lost?
  • A: If you hear a disconnection alert, move closer to your mobile phone to reconnect within 10 meters.

Product Usage Instructions

• a. Take out the left and right earphones from the charging box, at this time, after seeing that the blue LED of the left and right earphones are lit for 3 seconds at the same time, the blue LED of the left earphone goes out, and the red and blue LEDof the right earphone flashes alternately, indicating that the left and right earphones have been automatically connected and are waiting for the mobile phone to turn on the Bluetooth search function to pair with them. At this point, turn on the Bluetooth function of the mobile phone, select the search “Angry StagIE-100” and click in. The red and blue LEDs stop flashing, and the blue LEDs light up once every 5 seconds, indicating that the connection with the mobile phone is successful and it can be used.
• b. Hearing on: Take the earphones out of the charging box, and double-click the touch button. At this time, you will hear two sounds of “beep, beep” and the “Hearing” function will be turned on.
• c. Hearing pause: Double-click the “R” or “L” touch button. At this time, you will hear a beep, and the “Hearing” function will return off. Then double-click the touch button again, and the “Hearing” function will be turned on.
• d. Bluetooth function: After the headset is connected to the mobilephone with Bluetooth, you can listen to the voice and music signals from the mobile phone through the headset, and pause/play the music by touching the button. When making a call, press the”R” or “L” touch button to answer the call, and then press to hang up.
• e. Bluetooth disconnection and connection: Distance between the earphone and the mobile phone is more than 10 meters, you’ll hear “Disconnected, Paring”, indicating disconnection; After re-entering within 10 meters, you will hear “Didi” indicating successful reconnection.
• f. Charge for headset: When the headset is put into the box, the 4.2 Voutput will charge the headset, and the headset will turn red during the charging process, and the full light will go out.
• g. Charge for the box: Micro-USB interface charges and 4 LEDs show the charging status. During the charging process, the LEDs are flashing and full, and 4 LEDs show full light.

FCC

FCC ID： OSF-IE-100

FCC Warning statement:

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may causeundesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply withthelimitsfor a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>