AUTOMOTIVE Street Bob Adjustable Driver Passenger Seat Backrest Installation Guide
- June 1, 2024
- AUTOMOTIVE
Table of Contents
AUTOMOTIVE Street Bob Adjustable Driver Passenger Seat Backrest
Product Information
Specifications
- Model : Motorcycle Backrest and Folding Frame
- Compatibility : 18-up FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS, FXST models
- Material : Aluminum
- Colour : Black
Product Usage Instructions
Installation Instructions
-
Remove the two screws on the side of the car respectively.
-
First, install the matching aluminium sleeve.
Note : No need to remove the rear turn signal or housing. -
Align the 4 small circles in the bracket with the mounting holes in the motorcycle.
-
Mount the bracket with screws.
Note : The bracket does not distinguish between left and right.
Note : Applicable screws to hold the bracket, do not screw to the tightest first, to facilitate theinstallation of the backrest when there is room for adjustment -
For FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS, and FXST models, use appropriate screws to hold the bracket. Do not tighten the screws completely initially to allow adjustment for backrest installation.
-
After completing the bracket installation, connect the sissy bar securely.
-
Use a tool to tighten the backrest screws firmly.
-
Screw down the two screws on the folding frame.
-
Insert the backpack directly into the folding frame.
-
Use a tool to tighten the screws securely to complete the installation.
FAQ
Q: Can this backrest and folding frame be used on all motorcycle models?
A: The product is compatible with 18-up FLDE, FLHC, FLHCS, FLSL, FXBB, FXBBS,
and FXST models only.
Q: Do I need any special tools for installation?
A: You may require a tool to tighten the backrest screws and secure the
folding frame screws during installation.