Automotive LK-CHE-6372-B-LC Lift Leveling Kit Instruction Manual
- June 1, 2024
- AUTOMOTIVE
Table of Contents
Automotive LK-CHE-6372-B-LC Lift Leveling Kit
LIFT LEVELING KIT INSTALLATION INSTRUCTION
FITMENT
- For Chevy Cl0 Panel 1963-1967
- For Chevy Cl0 Pickup 1963-1972
- For Chevy Cl0 Cl0 Suburban 1967-1972
- For GMC C15/C1500 Pickup 1967-1972
- For GMC C15/C1500 Suburban 1968-1972
- For Chevy Blazer 2wd 1969-1972
- For Chevy Cl0 / Cl000 Truck: 2wd 1960-1972
- For Chevy C20 / C2000 Suburban 2wd 1967-1972
- For Chevy C20 / C2000 Truck 2wd 1960-1972
- For GMC C25 / C2500 Truck 2wd 1960-1972
- For GMC Jimmy 2wd 1969-1972
BEFORE INSTALLATION
Please read the following terms and conditions of use before using this product All users of this product are subject to the following terms and conditions and other applicable laws. All parts of this product should be assembled or installed by a certified mechanic. We assume no responsibility for any accident, injury, death, or damage caused by incorrect installation and usage
KIT CONTENT
PRODUCT INFORMATION
This lowering drop kit includes rear blocks and U-bolts that lower your rear end at a 3-inch.
INSTALLATION INSTRUCTION
- Jack up the vehicle’s rear end and support the axle with jack stands. Remember to chock the front wheel. Remove the rear wheels and tires.
- Disconnect the brake line from its bracket. disconnect the bolt on the shock bottom. Remove the factory U-bolts and nuts
- Lower the axle and get the factory block out of the vehicle. put the new lift block and connect it with the new U-bolt. bolt all bolts down and repeat on the other side. Put wheels and tires on.
MAINTENANCE
- A regular check of bolt tightness is highly required. We suggest drivers have all bolts and nuts checked for tightness after the first 200 miles and then every 1000 miles.
- NOTE: All modifications must be installed by qualified personnel and in compliance with your local modification regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>