VEVOR WSWP-2 Slatwall Panels with Hooks Instruction Manual
- June 1, 2024
- VEVOR
Table of Contents
VEVOR WSWP-2 Slatwall Panels with Hooks
We continue to be committed to provide you tools with competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.
Model : WSWP-2, WSWP-4, WSWP-8, WSWP-8H
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
INSTRUCTIONS
Thank you very much for choosing this Slatwall Panels
- Please read all of the instructions before using it.The information will help you achieve the best possible results.
WARNING:
- Operate in a safe work environment. Keep your work area clean, well-lit, and free of distractions.
- Wear heavy-duty work gloves during assembly.
- Over-loading is strictly forbidden.
- Slatwall can be cut horizontally or vertically to accommodate room dimensions.
- Preferably using an electric saw with a thin, sharp blade for slatwall cutting .
SAVE THESE INSTRUCTIONS.
MODEL AND PARAMETERS
Model| WSWP- 2| WSWP- 4| WSWP- 8| WSWP-
8H
---|---|---|---|---
Quantity
（pieces）
| 2| 4| 8| 8
Size of each
piece（ft)
| 4 * 1
Total area
(sq.ft)
| 8| 16| 32| 32
Trim strip| 2ft *2pcs
4ft *2pcs
| 4ft 4pcs| 4ft 8pcs| 4ft *8pcs
Hook rack
| ****
without
| single arm（4inch）
*12PCS
both arms（8inch）
*2PCS
both arms（3inch）
*2PCS
both arms（4inch）
*2PCS
J arm（5inch）*2PCS
Color| TAUPE
Material| WPC
Capacity of
each slot
| 75lbs
ASSEMBLY AND USE
- Install the direction of the slatwall panel，see Figure 1.
- It is recommended to install the wooden strips to the wall at intervals of 12″ (305mm). Then install screws in the slots of the wall panels, as shown in Figure 2 and Figure 3 . Be sure to level the Slatwall before screwing them into the wooden studs.
MAINTENANCE
- Avoid prolonged exposure to the sun to avoid aging.
Address : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai.
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD NSW 2122 Australia.
Imported to USA: Sanven Technology Ltd, Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
EC REP
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
UK REP
Pooledas Group Ltd
Unit 5 Albert Edward House, The
Pavilions Preston, United Kingdom
Technical Support and E-Warranty Certificate
www.vevor.com/support
Documents / Resources
|
VEVOR WSWP-2 Slatwall Panels with
Hooks
[pdf] Instruction Manual
WSWP-2, WSWP-4, WSWP-8, WSWP-8H, WSWP-2 Slatwall Panels with Hooks, WSWP-2,
Slatwall Panels with Hooks, Panels with Hooks, Hooks
---|---