SKYDANCE PS1 Wall Mounted Rotary Panel User Manual

SKYDANCE PS1 Wall Mounted Rotary Panel

Model No. : PS1, PS2, PS3

1-3 color/Glass panel/Rotary dimming/Wireless remote 30m distance/AAA x 2 battery

Features

• Rotary glass panel single color, dual color or RGB RF remote.
• Rotate knob to change RGB color, color temperature or brightness, support long press or twice click operation.
• Each remote can match one or more receiver.
• Free installation, no wiring, removable.
• AAA x 2 battery powered.

Technical Parameters

Input and Output

Output signal| RF(2.4GHz)
Working voltage| 3VDC(AAA x 2)
Working current| ＜5mA
Standby current| ＜10μA
Standby time| 1 year
Remote distance| 30m

Environment

• Operation temperature: Ta: -30 OC ~ +55 OC
• Case temperature (Max.): T c: +65OC
• IP rating: IP20

Safety and EMC

EMC standard (EMC)

| ETSI EN 301 489-1 V2.2.3

ETSI EN 301 489-17 V3.2.4

Safety standard(LVD)| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certification| CE,EMC,LVD,RED

Warranty: 5 year

Mechanical Structures and Installations

Installation diagram

Typical base as below

To fix the panel, two options are offered for selection:
Option 1: fix it on the wall with two screws.
Option 2: adhere it to the wall with paster.

Knob function

• PS1 Single color dimming remote

  • Push: Turn on or off light.
    After turn on light:

  • Rotate: Rotate knob to adjust brightness(2.5 turns, 50 levels).

  • Long push(1-6s): Continuous 256 levels brightness adjustment

• PS2 Color temperature remote

  • Push: Turn on or off light.
    After turn on light:

  • Rotate: Rotate knob to adjust brightness(2.5 turns, 50 levels).

  • Push twice: Switch between RGB color or brightness adjustment.

  • Long push(1-6s): Continuous 256 levels brightness adjustment

• PS3 Color temperature remote

  • Push: Turn on or off light.
    After turn on light:

  • Rotate: Rotate knob to adjust brightness(2.5 turns, 50 levels).

  • Push twice: Switch between RGB color or brightness adjustment.

  • Long push(1-6s): Continuous 256 levels brightness adjustment

Match Remote Control (two match ways)

End user can choose the suitable match/delete ways. Two options are offered for selection:

Use the controller’s Match key

Match:
Short press match key, immediately push the knob.
The LED indicator fast flash a few times means match is successful.

Delete:
Press and hold match key for 5s to delete all match.
The LED indicator fast flash a few times means all matched remotes were deleted.

Use Power Restart

Match:
Switch off the power, then switch on power, repeat again.
Immediately push the knob 3 times.
The light blinks 3 times means match is successful

Delete:
Switch off the power, then switch on power, repeat again.
Immediately push the knob 5 times.
The light blinks 5 times means all matched remotes were deleted.

Safety information

1. Read all instructions carefully before you begin this installation.

2. When installing battery, pay attention to the battery positive and negative polarity.
   A long time without the remote control, remove the battery.
   When remote distance becomes smaller and insensitive, replace the battery.

3. If no response from the receiver, please re-match the remote.

4. Gently handle remote, beware of falling.

5. For indoor and dry location use only

References

• Sklep ELED - oświetlenie LED na miarę Twoich potrzeb

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>