VEVOR By-168 Ice Shaver Machine User Manual
- June 10, 2024
- VEVOR
Table of Contents
By-168 Ice Shaver Machine
User Manual
By-168 Ice Shaver Machine
Please read this manual carefully before use.
Technology is subject to change without notice.
Parts Name
- The entrance for adding ice
- Power switch
- Exit for ice
- Blade adjuster
- base
Technical Parameter
| Overall Size | 290mmx390mmx430mm |
|---|---|
| Power Supply | 110V∼120V 220V∼240V/50∼60Hz |
| Specified Current | 3.5A |
| Speed Range | 320R/M |
| Specified Power | 250W |
| Productivity | 120Kg/H |
| N.W.: | 12Kg |
Notice: If the machine was jammed by ice, press the switch to Reverse!
Operation Instruction
- Open the lid, clean the ice trough with dry towel, check whether the blade is installed firmly.
- Please check whether there are damages of the power line and the plug, the leakage phenomenon, contacts whether good, close the switch, insert the power source.
- Open the machine lid, invest the right amount ice piece then cover the top head
- Press down the starting switch in the front of the machine.
- According your needs to adjust the blade adjuster to process each various ice with different thickness .
- The use ice piece diameter in 3-5cm is best, also may pound the big ice into small ones.
Notes
- Please use ~110V/220V voltage.
- The machine lid has the safe protective device, if the top head has not covered even if presses down the starting switch the machine won’ t be able to start.
- Please put in the smooth place, the ice piece invested must be even, otherwise can cause the fuselage vibration.
- The height of the ice quantity in the trough should 1cm below the red line.
- Please cleaning the trough after working.
- Please don’ t touch the blade, prevent from hurting.
- Don’ t dismental the machine when cleaning.
Read User Manual Online (PDF format)
Loading......