VISUAL COMFORT CHA 8670 Parisienne Medium Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT CHA 8670 Parisienne Medium Table Lamp
Product Information
Product Name: Parisienne Medium Table Lamp
Item Number: CHA 8670
This table lamp is designed to provide illumination in indoor spaces. It
requires a light bulb (not included) for operation. The lamp features a harp
(C) and a shade (B) that need to be assembled.
The lamp comes with a protective cover (E) for the plug.
Product Usage Instructions
-
Carefully remove all parts from the box and place them on a
clean, soft surface. -
Install the harp (C) by squeezing it together and inserting it
into the top of the saddle (D). -
Remove the finial (A) from the harp (C).
-
Remove the shade (B) from its packaging and install it to the
harp (C) using the finial (A). If the shade has additional
packaging, carefully cut it off from the interior of the shade to
avoid damages. -
Install a light bulb into the socket.
-
Remove the protective cover (E) from the plug.
-
Plug the lamp into an electrical outlet and test the
fixture.
Care Instructions
To clean the lamp, use only a soft dry cloth or a feather duster. Avoid using abrasive or chemical agents as they may damage the lamp’s surface.
ASSEMBLY INSTRUCTIONS
Parisienne Medium Table Lamp
Item # CHA 8670
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install.
Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Scissors
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Install harp (C) by squeezing together and inserting into the top of saddle (D).
-
Remove finial (A) from harp (C).
-
Remove shade (B) from packaging and install to harp (C) using finial (A).
NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages. -
Install light bulb into the socket.
-
Remove protective cover (E) from plug.
-
Plug into electrical outlet and test the fixture.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
